Lamona LAM3700 Manual de usuario
User Manual
Single Pyrolytic
Oven
LAM3700
CONTENTS
Safety information 2
Safety instructions 3
Product description 6
Control panel 6
Before first use 8
Daily use 9
Clock functions 12
Automatic programmes 13
Using the accessories 14
Additional functions 15
Hints and tips 17
Care and cleaning 27
Troubleshooting 31
Installation 33
Energy efficiency 34
Your guarantee 35
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and
damages. Always keep the instructions with the appliance for
future reference.
Children and vulnerable people safety
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
•Do not let children play with the appliance.
•Keep all packaging away from children.
•Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
•If the appliance has a child safety device, we recommend
you activate it.
•Cleaning and user maintenance shall not be made by
children without supervision.
•Children of less than 3 years should be kept away unless
continuously supervised.
2
General Safety
•Only a qualified person must install this appliance and
replace the cable.
•Internally the appliance becomes hot when in operation. Do
not touch the heating elements that are in the appliance.
Always use oven gloves to remove or put in accessories or
ovenware.
•Before maintenance cut the power supply.
•Ensure that the appliance is switched off before replacing
the lamp to avoid the possibility of electric shock.
•Do not use a steam cleaner to clean the appliance.
•Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
•Excess spillage must be removed before the pyrolytic
cleaning. Remove all parts from the oven.
•To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
•The means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
SAFETY INSTRUCTIONS
Installation
WARNING! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction supplied
with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING! Risk of fire and
electrical shock.
• All electrical connections should be
made by a qualified electrician.
3
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the
power supply. If not, contact an
electrician.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by our
Authorised Service Centre.
• Do not let mains cables touch or come
near the appliance door, especially when
the door is hot.
• The shock protection of live and
insulated parts must be fastened in such
a way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you
disconnect the appliance from the mains
at all poles. The isolation device must
have a contact opening width of
minimum 3 mm.
• Fully close the appliance door, before
you connect the mains plug to the mains
socket.
• This appliance complies with the E.E.C.
Directives.
Use
WARNING! Risk of injury, burns
and electrical shock or
explosion.
• Use this appliance in a household only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance
door while the appliance is in operation.
Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
WARNING! Risk of damage to
the appliance.
• To prevent damage or discoloration to
the enamel:
– do not put ovenware or other
objects in the appliance directly on
the bottom.
– do not put aluminium foil directly on
the bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food
in the appliance after you finish the
cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel has no effect
on the performance of the appliance. It
is not a defect in the sense of the
warranty law.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
4
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
• Always cook with the oven door closed.
Care and cleaning
WARNING! Risk of injury, fire,
or damage to the appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
• Make sure the appliance is cold. There is
the risk that the glass panels can break.
• Replace immediately the door glass
panels when they are damaged. Contact
the Service.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Remaining fat or food in the appliance
can cause fire.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety
instructions on the packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of detergent.
Pyrolytic cleaning
Risk of Injury / Fires / Chemical
Emissions (Fumes) in Pyrolitic
Mode.
• Before carrying out a Pyrolitic self-
cleaning function or the First Use please
remove from the oven cavity:
– any excess food residues, oil or
grease spills / deposits.
– any removable objects (including
shelves, side rails etc., provided with
the product) particularly any non-
stick pots, pans, trays, utensils etc.
• Read carefully all the instructions for
Pyrolytic cleaning.
• Keep children away from the appliance
while the Pyrolytic cleaning is in
operation.
The appliance becomes very hot and hot
air is released from the front cooling
vents.
• Pyrolytic cleaning is a high temperature
operation that can release fumes from
cooking residues and construction
materials, as such consumers are
strongly advised to:
– provide good ventilation during and
after each Pyrolytic cleaning.
– provide good ventilation during and
after the first use at maximum
temperature operation.
• Unlike all humans, some birds and
reptiles can be extremely sensitive to
potential fumes emitted during the
cleaning process of all Pyrolytic Ovens.
– Remove any pets (especially birds)
from the vicinity of the appliance
location during and after the
Pyrolytic cleaning and first use
maximum temperature operation to
a well ventilated area.
• Small pets can also be highly sensitive to
the localized temperature changes in the
vicinity of all Pyrolytic Ovens when the
Pyrolytic self cleaning program is in
operation.
• Non-stick surfaces on pots, pans, trays,
utensils etc., can be damaged by the
high temperature Pyrolytic cleaning
operation of all Pyrolytic Ovens and can
be also a source for low level harmful
fumes.
• Fumes released from all Pyrolytic
Ovens / Cooking Residues as described
are not harmful to humans, including
infants or persons with medical
conditions.
Internal light
• The type of light bulb or halogen lamp
used for this appliance is only for
household appliances. Do not use it for
house lighting.
WARNING! Risk of electrical
shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
5
•Only use lamps with the same
specications.
Disposal
WARNING! Risk of injury or
suocation.
•Disconnect the appliance from the mains
supply.
•Cut o the mains cable and discard it.
•Remove the door catch to prevent
children and pets to get closed in the
appliance.
PRODUCT DESCRIPTION
General overview
75
6
5
4
3
2
1
21
4
3
1Control panel
2Electronic programmer
3Heating element
4Lamp
5Fan
6Shelf support, removable
7Shelf positions
Accessories
•Wire shelf
For cookware, cake tins, roasts.
•Grill- / Roasting pan
To bake and roast or as pan to collect
fat.
•Trivet
For roasting and grilling.
Use the trivet only with the
Grill- / roasting pan.
CONTROL PANEL
Electronic programmer
1110987654321
6
WARNING FIRE RISK -
Do not place aluminium foil, baking trays
or cook on the base of this oven, doing so
will cause permanent damage to your
appliance and cabinetry with the potential
Use the sensor fields to operate the appliance.
Sensor
field
Function Comment
1- Display Shows the current settings of the appliance.
2ON / OFF To activate and deactivate the appliance.
3
Heating Func-
tions or Assisted
Cooking
Touch the sensor field once to choose a heating func-
tion or the menu: Assisted Cooking. Touch the sensor
field again to switch between the menus: Heating
Functions, Assisted Cooking. To activate or deacti-
vate the light, touch the field for 3 seconds. You can
activate the light also when the appliance is deactiva-
ted.
4Favourite Pro-
gramme
To save and access your favourite programmes.
5
Temperature se-
lection
To set the temperature or show the current tempera-
ture in the appliance. Touch the field for 3 seconds to
activate or deactivate the function: Fast heat up.
6Down key To move down in the menu.
7Up key To move up in the menu.
8OK To confirm the selection or setting.
9Home key To go back one level in the menu. To show the main
menu, touch the field for 3 seconds.
10
Time and addi-
tional functions
To set different functions. When a heating function
operates, touch the sensor field to set the timer or the
functions: Function Lock, Favourite Programme, Heat
+ Hold, Set + Go.
11 Minute Minder To set the function: Minute Minder.
7
Display
A
DE
B C
A) Heating function
B) Time of day
C) Heat-up indicator
D) Temperature
E) Duration time or end time of a function
Other indicators of the display:
Symbol Function
Minute Minder The function operates.
Time of day The display shows the current time.
Duration The display shows the necessary time
for cooking.
End Time The display shows when the cooking
time is complete.
Temperature The display shows the temperature.
Time Indication The display shows how long the heating
function operates. Press and at
the same time to reset the time.
Heat-up Indicator The display shows the temperature in
the appliance.
Fast Heat Up Indicator The function is active. It decreases the
heat up time.
Weight Automatic The display shows that the automatic
weight system is active or that weight
can be changed.
Heat + Hold The function is active.
BEFORE FIRST USE
WARNING! Refer to Safety
chapters.
Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial position.
8
First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast, the
display brightness and the time of the day.
1. Press or to set the value.
2. Press to confirm.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function: Conventional Cooking
and the maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function: True Fan Cooking
and the maximum temperature.
4. Let the appliance operate for 15
minutes.
Accessories can become hotter than usual.
The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow in the room is sufficient.
DAILY USE
WARNING! Refer to Safety
chapters.
Navigating the menus
1. Activate the appliance.
2. Press or to select the menu
option.
3. Press to move to the submenu or
accept the setting.
At each point you can go back
to the main menu with .
The menus in overview
Main menu
Sym
bol
Menu item Application
Assisted Cooking Contains a list of automatic programmes.
Heating Functions Contains a list of heating functions.
Pyrolysis Pyrolytic cleaning.
Basic Settings You can use it to set other settings.
9
Sym
bol
Menu item Application
Favourite Programme Contains a list of favourite cooking programmes cre-
ated by the user.
Submenu for: Basic Settings
Sym
bol
Submenu Description
Set Time of Day Sets the current time on the clock.
Time Indication When ON, the display shows the current time when
you deactivate the appliance.
Set + Go When ON, in the Select Options window you can
choose the function: Set + Go.
Heat + Hold When ON, in the Select Options window you can
choose the function: Heat + Hold.
Extra Time Activates and deactivates the time extension func-
tion.
Display Contrast Adjusts the display contrast by degrees.
Display Brightness Adjusts the display brightness by degrees.
Set Language Sets the language for the display.
Buzzer Volume Adjusts the volume of press-tones and signals by
degrees.
Key Tones Activates and deactivates the tone of the touch
fields. It is not possible to deactivate the tone of the
ON / OFF touch field.
Alarm/Error Tones Activates and deactivates the alarm tones.
Cleaning Reminder Reminds you when to clean the appliance.
Service Shows the software version and configuration.
Factory Settings Resets all settings to factory settings.
Heating Functions
Heating function Application
True Fan Cooking To bake on up to 3 shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C low-
er than for the function: Conventional Cooking.
10
Tabla de contenidos
Otros manuales de Horno de Lamona
Lamona
Lamona LAM4402 Manual de usuario
Lamona
Lamona LAM3410 Guía
Lamona
Lamona LAM3600 Guía de solución de problemas
Lamona
Lamona LAM4405 Guía
Lamona
Lamona LAM4601 Manual
Lamona
Lamona LAM4406 Manual de usuario
Lamona
Lamona LAM3801 Guía
Lamona
Lamona LAM3452 Manual de usuario
Lamona
Lamona LAM3704 Guía
Lamona
Lamona LAM3708 Guía
Lamona
Lamona LAM3802 Guía
Lamona
Lamona LAM3702 Manual de usuario
Lamona
Lamona LAM3675 Guía
Lamona
Lamona LAM3412 Guía
Lamona
Lamona LAM3501 Guía de solución de problemas
Lamona
Lamona LAM3214 Guía
Lamona
Lamona LAM7150 Manual de usuario
Lamona
Lamona LAM3201 Guía de solución de problemas
Lamona
Lamona LAM3405 Manual de usuario
Lamona
Lamona LAM4401 Guía de solución de problemas
