Labomed Lx 300 Manual de usuario

Part No: 9136001-795

Issue 1.2

Printed on Oct,2019

Lx 300

Clinical Microscopy

User Manual

To ensure proper use of this instrument as well as to avoid injury while operating

Instrument, understanding this manual completely before use is highly recommended.

TABLE OF CONTENTS

1. INTRODUCTION 1

2. SAFETY INFORMATION 2-4

3. Lx 300 BINOCULAR 5

4. Lx 300 TRINOCULAR 6

5. UNPACKING YOUR MICROSCOPE 7

6. STANDARD COMPONENTS 8

7. OPTIONAL ACCESSORIES 9-11

8. INITIAL SETUP 12

9. ASSEMBLY 13-14

10. SUMMARY OF BRIGHT FIELD OBSERVATION PROCEDURE 15

11. DETAILED OBSERVATION PROCEDURE 16-20

12. TROUBLESHOOTING GUIDE 21-22

13. SPECIFICATIONS 23

Lx 300

The Lx 300 is a clinical microscope reflecting a modern design as well as the latest in optical and mechani-

cal advancements. Designed for professionals as well as clinicians, this microscope offers many features

and functions with excellent ergonomics for a fatigue free usage. Here are a few points highlighting the

benefits of the Lx 300:

-Extra clarity and contrast is provided through a 360°rotatable Binocular body inclined at 45°with IPD

and height adjustments.

-The pressure die cast stand consists of ball bearing, frictionless sideways focusing to avoid any loss in

motion.

- All painted surfaces are with anti-microbial properties.

-The sturdy new stylish design provides a high degree of comfort as well as stability.

-The high powered objectives are spring loaded to prevent accidental damage to specimen slides.

-The quadruple nosepiece has a comfortable ribbed grip for easy rotation that also safeguards the turret

system against any damage. All positions are par-centered and par-ensuring the highest level of accuracy.

-The ball bearing mechanical stage allows smooth travel over a 75 x 40mm area with spring loaded stage

clamps for retaining the specimen at the exact position desired. A 0.1mm verier scale provides accurate

location of specimen area.

-High power illumination is delivered through our well crafted Universal Power Supply and operates with

any 100V-240V AC input. The LED configuration is operational with an in-built rechargeable battery P/N

9135000-902, Which when plugged in, draws power from a Universal Power Supply operating at 100V-240

AC input. This ensures continuous operation even under fluctuation voltages.

- Our LED has an average life span of upto 50,000 hours.

-The Lx 300 comes equipped with a removable N.A. 1.25 Abbe condenser with aspheric lens for brighter

Illumination levels, and an iris diaphragm for better resolution and contrast control.

Lx 300

1INTRODUCTION

9136001-795 Lx 300

Issue 1.2

Printed on Oct,2019

Fig. 1

SAFETY SYMBOLS

The following symbols are found on the microscope. For optimal use, it is recommended that users

Understand these symbols and always use the equipment as prescribed.

Symbol Explanation

This surface has a tendency to heat up and should not be touched unless

System has completely cooled down.

Before use, carefully read the instruction manual. Improper use could result in

Injury to the user and/or damage to the equipment.

Main switch is ON.

Warning against risk of electric shock.

Main switch is OFF

SAFETY INFORMATION

1. After the microscope has been used for observation of a speci

-men containing bacteria, clean all parts coming in contact with

the specimen to prevent infection.

•Be sure to remove the specimen before moving this product.

•In case the specimen is damaged by erroneous operation, it is

important to clean all surfaces that may have come in contact

with the specimen.

2. To avoid potential electrical hazards while replacing either

LED, turn the microscope main switch to the OFF position

and disconnect power cord from wall outlet in advance.

Whenever you replace your microscope LED, allow lamp socket

and LED to cool before touching (Fig.1)

Applicable LED replacement: LED P/N 9135000-901

3. Install microscope on a sturdy, level table or bench and avoid any restriction of air vents in the base of

the unit.

Do not place microscope on a flexible surface, as this could result in blocking the air vents and cause

Overheating.

4. Always use the power cord provided by LABOMED. If the proper power cord is not used, product safety

performance cannot be warranted.

5. When installing the microscope, route the power cord away from the microscope frame. Should the

power cord come in contact with the microscopes base, the power cord could melt due to overexposure

to heat.

6. Always ensure that the grounding terminal of the microscope and that of the wall outlet are properly

connected. If the unit is not grounded, LABOMED can not warrant electrical safety.

7. Never allow metallic objects to penetrate the air vents of the microscope frame as this could result in

user injury and damage to the microscope.

8. After operation of microscope, be sure to disconnect power cord from connector socket of the microscope

or from the wall power outlet.

Lx 300

9136001-795 Lx 300

Issue 1.2

Printed on Oct,2019

Fig. 2

Fig. 3

Caution

If the microscope is used in a manner not specified by this manual, the safety of the user may not be

warranted. In addition, the equipment may also suffer damage. Always use the equipment as outlined in

this instruction manual.

1. A microscope is a precision instrument with delicate glass compo-

nents. Please handle with care.

2. Do not use the microscope where it is subjected to direct sunlight,

high temperature, humidity, dust and vibrations. ( For the operat

-ing conditions, see chapter 13. “SPECIFICATIONS”)

3. The microscope is ventilated by natural convention. Be sure to

leave enough space (10cm or more) around body when installing

the unit.

4. Arm handle is provided for carrying the microscope.

To prevent damage, do not hold the microscope by the stage or

observation tube.

Be sure to remove the specimen from the stage clip while

transporting unit to avoid damage of the specimen slide.

1. Clean all glass components by wiping gently with cleaning cloth provided. To remove fingerprints or oil

smudges, wipe with cleaning cloth slightly moistened with a mixture of petroleum (85%) and isopropa

-nol (15%).

Since solvents such as petroleum and isopropanol are highly flammable, they must be handled carefully.

Be sure to keep these chemicals away from open flames or potential Sources of electrical sparks - For

Example, electrical equipment that is being switched “ON” or “OFF”. Also remember to always use these

chemicals only in a well-ventilated room.

2. Do not attempt to use organic solvents to clean the microscope components other than the glass compo

-nents. To clean non-glass components, use a lint-free, soft cloth slightly moistened with a diluted

neutral detergent.

3. Do not disassemble any part of the microscope as this could result in malfunction or mitigated perfor

-mance.

Lx 300

1GETTING STARTED

MAINTENANCE AND STORAGE

9136001-795 Lx 300

Issue 1.2

Printed on Oct,2019

4. When not using the microscope, ensure that the frame is fully

cooled before storing the unit in a dry locker or covering with a

dust cover (provided).

5. To clean the condenser/phase turret, fully loosen the Securing

thumb screw (1) and remove the condenser then, wipe the front

lens of the condenser with optical cleaning solution (mixture

suggested above) and lens tissue.

The condenser can be re-attached by replacing the condenser in

its seat, tightening securing thumb screw, and raising condenser

bracket to desired position.

6. Be sure to observe your local rules/regulation for product disposal.

Zig-zag motion (X) Spiral motion ( )

Your microscope had been engineered for a long and safe operational life with the least amount of main-

tenance required. In general, routine maintenance is limited to keeping the microscope working parts

lubricated and optics clean. Always cover the microscope with the provided dust cover when not in use.

Optical Cleaning

1. The objective have been adjusted for a tight fit to prevent any damage during transportation. To remove

an objective, rotate it counterclockwise while gripping it with a rubber sheet, etc. to avoid any slip page.

2. To clean the lens surfaces, remove dust using a soft brush or gauze (compressed air dust cans are

ideal). For removing finger marks or grease, soft cotton cloth or lens tissue lightly moistened

with cleaning solution ( 85% petroleum ether and 15% isopeopanol) should be used. For cleaning the

optics, use Methanol. Observe sufficient caution in handling Methanol. Place the Objective and/ or

Eyepieces on a dust free surfaces (e.g. aluminum foil). All other optical components to be cleaned should

be as accessible as possible.

3. Blow all loose dust particles away with a dust blower.

4. Remove all water-soluble dirt with distilled water. If this is unsuccessful repeat using a solution of

diluted hand soap liquid. Remove any remaining residue with a dry cotton swab.

5. To remove oil, use a solution of diluted hand-soap liquid initially. If this does not produce a satisfac-

tory result, repeat the cleaning using a solvent (Optical Cleaning Solution 85% petroleum ether and

15% isopropanol).

6. Grease must always be removed using a solvent.

7. Cleaning is achieved by using a spiral motion from the center to the rim. Never wipe using zig-zag

movements as this will only spread the dirt. With larger optical surfaces (e.g. tube lenses) the spiral

motion starts initially at the rim before to the middle and is only then followed by a center to rim

cleaning motion. Normally several spiral wipes are recommended.

We recommend pure, volatile petroleum ether or Optical Cleaning Solution as explained in point 3 above.

Wipe using a spiral movement. Do not use a zig-zag motion!

Cleaning of painted surfaces

Avoid the use of any organic solvent (e.g. thinner, xylene, ether, alcohol etc.) for cleaning of painted

surfaces of the instrument. Painted surfaces can be cleaned with a very lightly moistened micro fiber

cloth. Loose dust and dirt can be removed using a brush of soft hair used exclusively for this purpose.

Lx 300

3CARE & MAINTENANCE

9136001-795 Lx 300

Issue 1.2

Printed on Oct,2019

Lx 300 BINOCULAR

Lx 300

9136001-795 Lx 300

Issue 1.2

Printed on Oct,2019

Eyepieces

Binocular viewing tube, 45° inclined°

Mechanical

stage

Coarse and

fine focus knob

X-Y movement control knob

On/off intensity regulator

Filter holder

Abbe condenser

Specimen holder

Objectives

Revolving nosepiece

Lx 300

Lx 300 TRINOCULAR

9136001-795 Lx 300

Issue 1.2

Printed on Oct,2019

Eyepieces

Trinocular viewing tube, 30° inclined°

Trinocular Port

Mechanical

stage

Coarse and

fine focus knob

X-Y movement control knob

On/off intensity regulator

Filter holder

Abbe condenser

Specimen holder

Objectives

Revolving nosepiece

UNPACKING YOUR MICROSCOPE

Lx 300

9136001-795 Lx 300

Issue 1.2

Printed on Oct,2019

Power Cord

Eyepieces

Observation head

Microscope Arm

Otros manuales para Lx 300

Tabla de contenidos

Otros manuales de Microscopio de Labomed

Labomed

Labomed Magna Manual de usuario

Labomed

Labomed PRIMA DNT Trainer Manual de usuario

Labomed

Labomed Prima OPH Manual de usuario

Labomed

Labomed CxL Manual de usuario

Labomed

Labomed Lx 500 Manual de usuario

Labomed

Labomed CxL Dark Field Kit Manual de usuario

Labomed

Labomed Lx 400 Manual de usuario

Labomed

Labomed PRIMA Mm Manual de usuario

Labomed

Labomed Luxeo 6i Manual de usuario

Labomed

Labomed Lx 300 Manual de usuario

Labomed

Labomed CxL Polarizing Kit Manual de usuario

Labomed

Labomed L POL Series Manual de usuario

Labomed

Labomed Prima Mu Manual de usuario

Labomed

Labomed TCM 400 Manual de usuario

Labomed

Labomed STELLA Manual de usuario

Labomed

Labomed Sigma Manual de usuario

Labomed

Labomed CZM6 Manual de usuario

Labomed

Labomed Luxeo 6z Manual de usuario

Labomed

Labomed Lx POL Manual de usuario

Labomed

Labomed TCM 400 FLR Manual de usuario

Labomed

Labomed TCM 400 Manual de usuario

Labomed

Labomed PRIMA ENT Manual de usuario

Labomed

Labomed Lx 500 Manual de usuario

Labomed

Labomed Lx 400 Manual de usuario

Manuales populares de Microscopio de otras marcas

Thermo Scientific

Thermo Scientific Nicolet iN10 Guía

National

National DC3-163 Manual de usuario

KERN Optics

KERN Optics OPE-1 Manual de usuario

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manual de usuario

Prior

Prior Lux POL Manual de usuario

Opitec

Opitec Smartscoop 115615 Manual de usuario

KERN

KERN OPO-1 Manual de usuario

Topcon

Topcon SP-1P Manual de usuario

Motic

Motic PA43 Manual de usuario

Leica

Leica DVM5000 Guía del usuario

MshOt

MshOt MZ62 Manual de usuario

KERN Optics

KERN Optics OZR-5 Manual de usuario

VWR

VWR VisiScope 384 Series Manual de usuario

Nikon

Nikon ECLIPSE E200 POL Manual de usuario

Leica

Leica DI C800 Manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

Olympus

Olympus SZ61 Manual de usuario