La Crosse Technology WWVB Manual de usuario

WWVB-RADIO CONTROLLED WATCH

The NIST (National Institute of Standards and Technology-Time and

Frequency Division) WWVB radio station is located in Ft. Collins,

Colorado, and transmits the exact time signal continuously at 60 kHz.

The signal can be received up to 2,000 miles away through the

internal antenna in the E Howard & Co. watch. However, due to the

nature of the Earth's Ionosphere, reception is very limited during

daylight hours.

The Watch will search for a signal every night when reception is best.

The WWVB radio station derives its signal from the NIST Atomic

clock in Ft. Collins, Colorado. A team of atomic physicists is

continually measuring every second, of every day, to an accuracy of

ten billionths of a second per day. These physicists have created an

international standard, measuring a second as 9,192,631,770

vibrations of a Cesium-133 atom in a vacuum. This watch is

regulated by the WWVB transmitter.

For more information on WWVB and the NIST Atomic clock please

visit their website at

http://www.boulder.nist.gov/timefreq/stations/wwvb.htm

SET-UP GUIDE, FEATURES AND OPERATION

DISPLAY OF HOURS/MINUTES

Recessed

button

Analogue display

Digital LCD

Push-piece

button

Normally upon purchase, the watch will already display the correct

time and date, and it will not be necessary to use the manual

settings.

Hours and Minutes are shown using the analog display.

Date and Seconds are shown in the digital LCD.

DIGITAL DISPLAY OF DATE, SECONDS, AND WWVB

RECEPTION CONTROL

Press and release the PUSH-PIECE to toggle between the displays:

•Month and Day

The Date appears as Month and day (ex: 12.30)

•Or Seconds and WWVB Signal Reception Icon

Manual Setting

TIME & DATE

If the wristwatch is not able to receive the WWVB signal, you may set

the time manually.

IMPORTANT:

If the WWVB signal is received correctly, the symbol (tower) is

shown, and setting the time and date manually is not possible.

1. To change the setting mode for time and date, press the PUSH-

PIECE and the RECESSED BUTTON simultaneously for about

4 seconds. The seconds will flash in the LCD display.

2. Press and release the PUSH-PIECE. The seconds will be set to

zero (00).

3. Press and release the PUSH-PIECE to set the minutes. Hold

the PUSH-PIECE continuously to fast forward the minutes.

4. By pressing and releasing the RECESSED BUTTON you can

change the setting menu in the following order:

a. Seconds

b. Minutes

c. Hours

d. Year

e. Month

f. Day

g. The display of the date without the possibility to adjust it

5. As soon as the WWVB signal can be received again, the watch

will automatically adjust to the correct time.

BEGIN WWVB SIGNAL SEARCH MANUALLY

*If the WWVB reception is disturbed, you can start the WWVB signal

search manually.

1. Press and hold the PUSH-PIECE for about 4 seconds. The

hands will advance to the 12:00 position. “SET” and “12” will

then flash alternately in the LCD. If the hands do not move

exactly to the 12:00 position, you will have to manually adjust the

hands. (See “Adjusting the Hands”)

2. Place the watch on a steady surface for better reception. Prior

to WWVB reception (and 15 seconds after holding the PUSH-

PIECE) the hands will automatically return to the manually set

time. The watch is now set to the WWVB signal reception mode.

If the reception is disturbed (ex: close proximity to metallic

objects or electric appliances), the watch will automatically try

several times to receive the WWVB signal.

ADJUSTING THE HANDS

If the time is displayed incorrectly despite successful WWVB signal

reception, the hands may have been moved by mechanical

influences and will need to be adjusted manually.

1. Press and hold the PUSH-PIECE for about 4 seconds. The

hands will move towards the 12:00 position.

a. If the hands do not stop at the 12:00 position, press and

release the RECESSED BUTTON one time. Press and

release the RECESSED BUTTON several times to advance

the big hand in small steps until the hands are set exactly to

the 12:00 position.

b. To exit this setting, press and release the PUSH-PIECE.

2. Press and release the PUSH-PIECE. The watch automatically

adjusts to the manually set time and attempts to receive the

WWVB signal. After successful WWVB signal reception, the

time will be set automatically.

SETTING TIME ZONE

You may select your time zone manually.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mirar de La Crosse Technology

La Crosse Technology

La Crosse Technology WT-971L Manual de usuario

La Crosse Technology

La Crosse Technology XG-25 Compass X'treme Manual de usuario

La Crosse Technology

La Crosse Technology WT-961B Manual de usuario

La Crosse Technology

La Crosse Technology EH-21G Manual de usuario

La Crosse Technology

La Crosse Technology XG-66 Total X'treme Manual de usuario

La Crosse Technology

La Crosse Technology WT-941 Manual de usuario

La Crosse Technology

La Crosse Technology UV-100 Manual de usuario

La Crosse Technology

La Crosse Technology Max X'treme K3-100 Manual de usuario

La Crosse Technology

La Crosse Technology XG-20 Manual de usuario

La Crosse Technology

La Crosse Technology EH-23SA E Howard Manual de usuario

La Crosse Technology

La Crosse Technology WT-941 Manual de usuario

La Crosse Technology

La Crosse Technology WT-3161WH Manual de usuario

La Crosse Technology

La Crosse Technology WT-182 Manual de usuario

La Crosse Technology

La Crosse Technology WT-966B Manual de usuario

La Crosse Technology

La Crosse Technology WT-967 Manual de usuario

La Crosse Technology

La Crosse Technology WT-966B Manual de usuario

La Crosse Technology

La Crosse Technology WT-951 Manual de usuario

La Crosse Technology

La Crosse Technology XG-55 Manual de usuario

La Crosse Technology

La Crosse Technology K2-100 Manual de usuario

La Crosse Technology

La Crosse Technology WT 280 Manual de usuario

La Crosse Technology

La Crosse Technology WT-951 Manual de usuario

La Crosse Technology

La Crosse Technology WT-961B Manual de usuario

La Crosse Technology

La Crosse Technology XG-55 Manual de usuario

La Crosse Technology

La Crosse Technology Total X'treme XG-59 Manual de usuario

Manuales populares de Mirar de otras marcas

Pandora

Pandora WATCH2 Manual de usuario

Casio

Casio QW-4343 Manual de usuario

Suunto

Suunto X6 Manual de usuario

Seiko

Seiko N830 Manual de usuario

MotionX

MotionX 365 Manual de usuario

Garmin

Garmin VENU SQ 2 Manual de usuario

QCY

QCY Watch GTC Manual de usuario

Canyon

Canyon Cindy CNE-KW41WP Manual de usuario

Esq

Esq Watches Guía de instalación

Crane

Crane AA5-CDSM-3A Manual de usuario

Timex

Timex W-214 Manual de usuario

DETOMASO

DETOMASO MATERA Manual de usuario

Geemarc

Geemarc Watch N Shake Manual de usuario

LORUS

LORUS W590 Manual de usuario

STENLILLE

STENLILLE Actío Manual de usuario

Casio

Casio 5594 Manual de usuario

Sinn

Sinn HUNTER'S WATCH 3. Edition Manual de usuario

Slazenger

Slazenger SLZ800 Manual de usuario