La Crosse Technology 513-1419v4-WA Manual de usuario

Atomic Digital Oce Clock

Instruction Manual

Model: 513-1419v4-WA

DC: 030418

STEP 1: POWER UP

Install batteries into your clock. For

detailed instructions on how to power up

your clock, please review the full manual at:

http://bit.ly/513-1419v4-WA

Note: The clock will search for Atomic time

signal for 2 hours after batteries are installed.

For information about WWVB Atomic time

visit: http://bit.ly/AtomicTime

STEP 2: SETTINGS

Hold the MODE button to enter set mode. Use

+/- buttons to adjust and MODE to confirm.

SETTING ORDER

Language

Beep

Atomic ON/OFF

Time Zone

DST ON/OFF

12/24 Hour

10.

11.

Hours

Minutes

Year

Month

Date

ºF or ºC

OTHER BUTTON FUNCTIONS

·Press MODE: Select between Calendar, Indoor

Temperature, Seconds, Full Weekday, or Date

·Hold ALARM: Set alarm time. Use +/- buttons

to adjust and ALARM to confirm.

·Press SNOOZE: Silence alarm for 10 minutes.

·Hold then press ALARM: to activate/deactivate

time alarm.

Atomic Digital Oce Clock

Instruction Manual

Model: 513-1419v4-WA

DC: 030418

STEP 1: POWER UP

Install batteries into your clock. For

detailed instructions on how to power up

your clock, please review the full manual at:

http://bit.ly/513-1419v4-WA

Note: The clock will search for Atomic time

signal for 2 hours after batteries are installed.

For information about WWVB Atomic time

visit: http://bit.ly/AtomicTime

STEP 2: SETTINGS

Hold the MODE button to enter set mode. Use

+/- buttons to adjust and MODE to confirm.

SETTING ORDER

Language

Beep

Atomic ON/OFF

Time Zone

DST ON/OFF

12/24 Hour

10.

11.

Hours

Minutes

Year

Month

Date

ºF or ºC

OTHER BUTTON FUNCTIONS

·Press MODE: Select between Calendar, Indoor

Temperature, Seconds, Full Weekday, or Date

·Hold ALARM: Set alarm time. Use +/- buttons

to adjust and ALARM to confirm.

·Press SNOOZE: Silence alarm for 10 minutes.

·Hold then press ALARM: to activate/deactivate

time alarm.

Atomic Digital Oce Clock

Instruction Manual

Model: 513-1419v4-WA

DC: 030418

STEP 1: POWER UP

Install batteries into your clock. For

detailed instructions on how to power up

your clock, please review the full manual at:

http://bit.ly/513-1419v4-WA

Note: The clock will search for Atomic time

signal for 2 hours after batteries are installed.

For information about WWVB Atomic time

visit: http://bit.ly/AtomicTime

STEP 2: SETTINGS

Hold the MODE button to enter set mode. Use

+/- buttons to adjust and MODE to confirm.

SETTING ORDER

Language

Beep

Atomic ON/OFF

Time Zone

DST ON/OFF

12/24 Hour

10.

11.

Hours

Minutes

Year

Month

Date

ºF or ºC

OTHER BUTTON FUNCTIONS

·Press MODE: Select between Calendar, Indoor

Temperature, Seconds, Full Weekday, or Date

·Hold ALARM: Set alarm time. Use +/- buttons

to adjust and ALARM to confirm.

·Press SNOOZE: Silence alarm for 10 minutes.

·Hold then press ALARM: to activate/deactivate

time alarm.

FIND FULL MANUALS UNDER THE

SUPPORT TAB AT: http://bit.ly/513-1419v4WA

JOIN THE CONVERSATION

Ask questions, watch detailed setup videos, and

provide feedback on our social media outlets!

NEED MORE HELP?

If you require additional support, call our friendly

customer support representatives based out of our

oce in La Crosse, Wisconsin.

Phone: 1.608.782.1610

Our knowledgeable customer support team is

available Monday-Friday, 8am-6pm CST.

WE’RE HERE TO HELP!

SPECIFICATIONS

·Indoor Temperature Range: 32°F to 99°F (0°C to37°C)

·Power Requirements: 2 “AA” Batteries (not included)

WARRANTY INFO

La Crosse Technology, Ltd. provides a 1-year limited

time warranty (from date of purchase) on this product

relating to manufacturing defects in materials &

workmanship.

For Full Warranty Details, Visit:

www.lacrossetechnology.com/support

CARE + MAINTENANCE

-Do not mix old and new batteries.

-Do not mix Alkaline, Lithium, standard, or

rechargeable batteries.

-Always purchase the correct size and grade of

battery most suitable for intended use;

-Clean the battery contacts and also those of the ·

device prior to battery installation;

-Ensure the batteries have with correct polarity (+ / -);

-Remove batteries from equipment that will not to be

used for an extended period.

-Promptly remove expired batteries.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Increase separation between equipment & receiver.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with

any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference

caused by unauthorized changes or modifications to this equipment.

Such changes or modifications could void the user authority to

operate the equipment.

form, even in part, or duplicated or processed using electronic,

mechanical or chemical process without the written permission of

the publisher.

This booklet may contain errors or misprints. The information it

contains is regularly checked and corrections are included in

subsequent editions. We disclaim any responsibility for any technical

error or printing error, or their consequences. All trademarks and

patents are recognized.

FCC STATEMENT

CANADA STATEMENT

This device complies with CNR Industry Canada license

-exempt devices. Operation is subject to the following two

conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including

interference that may cause undesired operation of

the device.