L3 FA5000 Guía de configuración
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
23−70−40
Rev. 06
March 16/16
RECORDER PART NUMBERS:
5001−6103−( ) CVDR
5011−6103−( ) CVDR
5001−6133−( ) CVDR with Video
5003−6103−( ) CVDR
500−4030−000 RIPS
COMPONENT MAINTENANCE MANUAL WITH
ILLUSTRATED PARTS LIST
P/N: 165E5398−00
IN ACCORDANCE WITH
FAA TSO−C123b,−C124b,−C155a,−C177
EUROCAE ED−112
VENDOR CODE: 06141
MODEL FA5000
COCKPIT VOICE and DATA RECORDER
DISTRIBUTION STATEMENT: This document contains L3 Aviation Recorders privileged
information and must not, without prior written consent of L3 Aviation Recorders, be used or reproduced
in whole or in part, or communicated to any person except as authorized by L3 Aviation Recorders.
WARNING: This technical data is controlled under the Export Administration Regulations (EAR) ECCN
7E994, and may not be exported to a foreign person, either in the U.S. or abroad, without a license or
exception from the U.S. Department of Commerce.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Rev. 05 Page ii
May 06/14
Title
23–70−40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Model FA5000
Rev. 06
March 16/16
This manual contains date sensitive information. To
verify the latest revision level of this manual, visit our
document download site at http://www.L−3ar.net.
ECopyright 2016 by L-3 Communications Cor-
poration, Aviation Recorders
End User Statement. This manual is intended for aircraft
owners and their designated agents for installation of
this product. No distribution to 3rd parties or resale of
this manual is permitted.
Inquiries should be addressed to:
L-3 Communications Corporation
Aviation Recorders
Technical Publications
100 Cattlemen Road
Sarasota, Florida 34232
(941) 371–0811
FAX: (941) 377–5591
CAGE Code 06141
Rev. 06 Page ii
March 16/16
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Rev. 05 Page iii
May 06/14
Title
23–70−40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
GENERAL
This product and related documentation must be reviewed for familiarization with
safety markings and instructions before operation.
This instrument was constructed in an ESD (electro–static discharge) protected environ-
ment. This is because most of the semiconductor devices used in this instrument are
susceptible to damage by static discharge.
Depending on the magnitude of the charge, device substrates can be punctured or de-
stroyed by contact or mere proximity of a static charge. The results can cause degrada-
tion of device performance, early failure, or immediate destruction.
These charges are generated in numerous ways such as simple contact, separation of
materials, and normal motions of persons working with static sensitive devices.
When handling or servicing equipment containing static sensitive devices, adequate
precautions must be taken to prevent device damage or destruction.
Only those who are thoroughly familiar with industry accepted techniques for handling
static sensitive devices should attempt to service circuitry with these devices.
In all instances, measures must be taken to prevent static charge build–up on work sur-
faces and persons handling the devices.
BEFORE APPLYING POWER
Verify that the product is set to match the available line voltage and the correct
fuse is installed..
Servicing instructions are for use by service–trained personnel only. To avoid dangerous
electric shock, do not perform any servicing unless qualified to do so.
Adjustments described in the manual are performed with power supplied to the instru-
ment while protective covers are removed. Energy available at many points may, if con-
tacted, result in personal injury.
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Rev. 05 Page iv
May 06/14
Title
23–70−40
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
THIS PAGE IS INTENTIONALLY LEFT BLANK
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Highlights
23–70–40
Rev.05 Page v
May 06/14
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
HIGHLIGHTS
Pages which have been added or revised are outlined below, together with the highlights
of Revision 06.
Section Page Description
Front Matter i −xxxvii except
for xxx, xiv Revised pages to Rev. 06
Introduction
Description &
Operation
CVR Testing &
Troubleshoot 104 Replaced ULB testing procedure with Test Set P/N: 17TES0015.
FDR Testing &
Troubleshoot Updated recommended test equipment.
Disassembly 301, 302 Updated the ULB removal procedure.
Cleaning 401, 402
Assembly 712, 713 Updated the ULB installation procedure.
Fit and Clear-
ances
Special Tools
and Test Equip-
ment
901
Illustrated Parts
List and Schem-
atic Diagrams
Updated with 90−Day ULB details.
Rev. 06 Page v
Mar. 16/16
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Highlights
23–70–40
Rev.05 Page vi
May 06/14
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
HIGHLIGHTS
Pages which have been added or revised are outlined below, together with the highlights
of Revision 05.
Section Page Description
Front Matter i −xxxvii except
for xxx, xiv Revised pages to Rev. 05
Introduction
Description &
Operation
CVR Testing &
Troubleshoot 104 Revised CATS software to V. 2.1 and ROSE software to V.4.7
FDR Testing &
Troubleshoot
Disassembly 301, 302 Added the RIPS P/N 500−4030−000
Cleaning 401, 402 Updated Table 401 and added reference.
Assembly 712, 713 Added the RIPS P/N 500−4030−000
Fit and Clear-
ances
Special Tools
and Test Equip-
ment
901 Revised ROSE software to V.4.7
Illustrated Parts
List and Schem-
atic Diagrams
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Highlights
23–70–40
Rev.05 Page vii
May 06/14
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
HIGHLIGHTS
Pages which have been added or revised are outlined below, together with the highlights
of Revision 04.
Section Page Description
Title Title Page Added RIPS P/N: 500−4030−000
List of FSB’s xiii Added Mod−Dot−2, Improves CAM audio Channel profromance
Front Matter
Introduction
Description &
Operation
CVR Testing &
Troubleshoot 100 −140 Revised CATS software using ROC/7 procedure
FDR Testing &
Troubleshoot 209, 217−235 Revised Table 202: Check Sums. Added Tables 203, 204 and 205:
Aircraft Interface, Main Processor and CSMU troubleshooting charts
Disassembly
Assembly
Fit and Clear-
ances 801, 802,
807−808 Revised weight of recorders. Revised Power level. Revised recorder
dimensions and new Illustrations.
Special Tools
and Test Equip-
ment
902 Revised CVDR Software
Illustrated Parts
List and Schem-
atic Diagrams
1004−1005,
1008, 1010 Revised Configuration Matrix, removed P/N; 5001−6103−10 and ad-
ded P/N: 5003−6103−11. Updated P/N changes. In the IPL, revised
part numbers
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Highlights
23–70–40
Rev.05 Page viii
May 06/14
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Pages which have been added or revised are outlined below, together with the highlights
of Revision 03.
Section Page Description
Title
List of FSB’s
Front Matter
Introduction 3 Changed part number.
Description &
Operation
Testing & Fault
Isolation 103 Changed part number 17TES0416 to read “17TES0418 with ad-
apter.”
Automatic
Testing
Disassembly
Assembly
Fit and Clear-
ances 804 Replaced Environmental Qualification Form (EQF).
Special Tools
and Test Equip-
ment
901 Added part numbers 17TES0418 and 17TES0711.
Changed software part number 840E5498−00 to read
“840E5498−01,” and added to the description of that part number,
part number 5003−6103−11.
Changed software part number 840E5497−00 to read
“840E5497−01.”
Illustrated Parts
List and Schem-
atic Diagrams
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Highlights
23–70–40
Rev.05 Page ix
May 06/14
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Pages which have been added or revised are outlined below, together with the highlights
of Revision 02.
Section Page Description
Title
List of FSB’s
Front Matter
Introduction
Description &
Operation Add sentence: To be compliant with TSO−C155a, RIPS must be in-
stalled on CVDR
Testing & Fault
Isolation
Automatic
Testing
Disassembly
Assembly
Fit and Clear-
ances
Special Tools
and Test Equip-
ment
Illustrated Parts
List and Schem-
atic Diagrams
Add figure 2. and Parts List for the RIPS
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
Model FA5000
Highlights
23–70–40
Rev.05 Page x
May 06/14
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Pages which have been added or revised are outlined below, together with the highlights
of Revision 01.
Section Page Description
Title
List of FSB’s
Front Matter
Introduction
Description &
Operation 16 Add sentence: To be compliant with TSO−C155a, RIPS must be in-
stalled on CVDR
Testing & Fault
Isolation
Automatic
Testing
Disassembly
Assembly
Fit and Clear-
ances
Special Tools
and Test Equip-
ment
Illustrated Parts
List and Schem-
atic Diagrams
1013, 1014 Add figure 2. and Parts List for the RIPS
The document reference is online, please check the correspondence between the online documentation and the printed version.
Otros manuales para FA5000
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Grabadora de voz de L3
