©L-com,Inc. Allrightsreserved. DGBH15FT-INS REV.09/06
45 Beechwood Drive • N. Andover, MA 01845 • Web: www.L-com.com • E-mail: sales@L-com.com
Tel: 800-343-1455 • Fax: 978-689-9484 or 978-685-6467
©L-com,Inc. Allrightsreserved. DGBH15FT-INS REV.09/06
45 Beechwood Drive • N. Andover, MA 01845 • Web: www.L-com.com • E-mail: sales@L-com.com
Tel: 800-343-1455 • Fax: 978-689-9484 or 978-685-6467
©L-com,Inc. Allrightsreserved. DGBH15FT-INS REV.09/06
45 Beechwood Drive • N. Andover, MA 01845 • Web: www.L-com.com • E-mail: sales@L-com.com
Tel: 800-343-1455 • Fax: 978-689-9484 or 978-685-6467
©L-com,Inc. Allrightsreserved. DGBH15FT-INS REV.09/06
45 Beechwood Drive • N. Andover, MA 01845 • Web: www.L-com.com • E-mail: sales@L-com.com
Tel: 800-343-1455 • Fax: 978-689-9484 or 978-685-6467
STEP2:
Identifyconductortoappropriatesignalnameper
pinouttable.Thesignalnamesarealsoetchedonthe
DGBH15FTPCBforreference.Note:Duetothewide
varietyofSVGAcable,thereisnostandardcolorcode
fortheconductorsotherthanthecoaxialRed,Green,
Blue.Theonlycertainwaytoidentifycorrect
conductoristoperformacontinuitytest.
STEP 3:
Insertcoaxialcenterconductorsandshieldsas
wellasconductorsintoappropriateslotsof
terminalboardbysignalnameinaccordance
with SVGA pinout table and etched signal
namesonthePCB.Tightenscrewstosecure.
STEP4:
Attachthecompletedassemblyto
mountingsurface.
SVGA PINOUT TABLE
PIN SIGNAL WIRE
1 RED COAX CC
2 GREEN COAX CC
3 BLUE COAX CC
4 ID BIT 2 TP 1
5 GROUND TP1
6 RED SHIELD COAX SHLD
7 GREEN SHIELD COAX SHLD
8 BLUE SHIELD COAX SHLD
9 DDV +5V COND 1
10 SYNC RTN TP 3/4
11 ID BIT 0 TP 2
12 ID BIT 1 TP 2
13 HORZ SYNC COND 2
14 VER SYNC TP 3
15 ID BIT 3 TP 4
16 SHELL DRAIN WIRE
STEP2:
Identifyconductortoappropriatesignalnameper
pinouttable.Thesignalnamesarealsoetchedonthe
DGBH15FTPCBforreference.Note:Duetothewide
varietyofSVGAcable,thereisnostandardcolorcode
fortheconductorsotherthanthecoaxialRed,Green,
Blue.Theonlycertainwaytoidentifycorrect
conductoristoperformacontinuitytest.
STEP 3:
Insertcoaxialcenterconductorsandshieldsas
wellasconductorsintoappropriateslotsof
terminalboardbysignalnameinaccordance
with SVGA pinout table and etched signal
namesonthePCB.Tightenscrewstosecure.
STEP4:
Attachthecompletedassemblyto
mountingsurface.
STEP2:
Identifyconductortoappropriatesignalnameper
pinouttable.Thesignalnamesarealsoetchedonthe
DGBH15FTPCBforreference.Note:Duetothewide
varietyofSVGAcable,thereisnostandardcolorcode
fortheconductorsotherthanthecoaxialRed,Green,
Blue.Theonlycertainwaytoidentifycorrect
conductoristoperformacontinuitytest.
STEP 3:
Insertcoaxialcenterconductorsandshieldsas
wellasconductorsintoappropriateslotsof
terminalboardbysignalnameinaccordance
with SVGA pinout table and etched signal
namesonthePCB.Tightenscrewstosecure.
STEP4:
Attachthecompletedassemblyto
mountingsurface.
SVGA PINOUT TABLE
PIN SIGNAL WIRE
1 RED COAX CC
2 GREEN COAX CC
3 BLUE COAX CC
4 ID BIT 2 TP 1
5 GROUND TP1
6 RED SHIELD COAX SHLD
7 GREEN SHIELD COAX SHLD
8 BLUE SHIELD COAX SHLD
9 DDV +5V COND 1
10 SYNC RTN TP 3/4
11 ID BIT 0 TP 2
12 ID BIT 1 TP 2
13 HORZ SYNC COND 2
14 VER SYNC TP 3
15 ID BIT 3 TP 4
16 SHELL DRAIN WIRE
STEP2:
Identifyconductortoappropriatesignalnameper
pinouttable.Thesignalnamesarealsoetchedonthe
DGBH15FTPCBforreference.Note:Duetothewide
varietyofSVGAcable,thereisnostandardcolorcode
fortheconductorsotherthanthecoaxialRed,Green,
Blue.Theonlycertainwaytoidentifycorrect
conductoristoperformacontinuitytest.
STEP 3:
Insertcoaxialcenterconductorsandshieldsas
wellasconductorsintoappropriateslotsof
terminalboardbysignalnameinaccordance
with SVGA pinout table and etched signal
namesonthePCB.Tightenscrewstosecure.
STEP4:
Attachthecompletedassemblyto
mountingsurface.
SVGA PINOUT TABLE
PIN SIGNAL WIRE
1 RED COAX CC
2 GREEN COAX CC
3 BLUE COAX CC
4 ID BIT 2 TP 1
5 GROUND TP1
6 RED SHIELD COAX SHLD
7 GREEN SHIELD COAX SHLD
8 BLUE SHIELD COAX SHLD
9 DDV +5V COND 1
10 SYNC RTN TP 3/4
11 ID BIT 0 TP 2
12 ID BIT 1 TP 2
13 HORZ SYNC COND 2
14 VER SYNC TP 3
15 ID BIT 3 TP 4
16 SHELL DRAIN WIRE
SVGA PINOUT TABLE
PIN SIGNAL WIRE
1 RED COAX CC
2 GREEN COAX CC
3 BLUE COAX CC
4 ID BIT 2 TP 1
5 GROUND TP1
6 RED SHIELD COAX SHLD
7 GREEN SHIELD COAX SHLD
8 BLUE SHIELD COAX SHLD
9 DDV +5V COND 1
10 SYNC RTN TP 3/4
11 ID BIT 0 TP 2
12 ID BIT 1 TP 2
13 HORZ SYNC COND 2
14 VER SYNC TP 3
15 ID BIT 3 TP 4
16 SHELL DRAIN WIRE
L-com Global Connectivity | 50 High St., West Mill, 3rd floor, Suite #30 | North Andover, MA 01845 | USA
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com Logo are registered marks.
Toll Free Ordering and Technical Support: 1-800-343-1455 Visit our website at www.L-com.com
