L-1 Identity Solutions 4G Lite Manual de usuario
4G INSTALLATION
GUIDE
Version 4.4.2.0.0.0.0
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved i
Copyright
Copyright Information
© 2011, L-1 Identity Solutions, Inc.
All rights reserved. This product and related documentation are protected by copyright and
distributed under licenses restricting their use, copying, distribution, and de-compilation. No
part of this product or related documentation may be reproduced in any form by any means
without written permission from L-1 Identity Solutions and its licensors, if any.
Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
Neither the name of the L-1 Identity Solutions, Inc. nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior written
permission.
TRADEMARKS
The trademarks identified herein are the trademarks or registered trademarks of L-1 Identity
Solutions, Inc. All other brands and products referenced herein are acknowledged to be
trademarks or registered trademarks of their respective holders or manufacturers.
THE PRODUCT AND PUBLICATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR
TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE
INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW
EDITIONS OF THE PUBLICATION. L-1 IDENTITY SOLUTIONS, INC MAY MAKE
IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S)
DESCRIBED IN THIS PUBLICATION AT ANY TIME.
IMPORTANT—Please refer to the L-1 Identity Solutions End User License Agreement
document and read it carefully before using any L-1 Identity Solutions software on your
computer. This document contains important information about your legal rights.
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved ii
Contents
Table of Contents
CHAPTER 1 - INTRODUCTION.......................................................7
CHAPTER OVERVIEW...............................................................7
1.1 SYMBOLS USED IN THIS GUIDE.................................................7
1.2 PRODUCT OVERVIEW...........................................................9
1.2.1 4G V-FLEX LITE & CR-PASS.................................................9
1.2.2 4G SECURE CONTROL.......................................................10
1.3 DEVICE DIMENSIONS.........................................................11
1.3.1 4G V-FLEX LITE..........................................................11
1.3.2 4G CR-PASS..............................................................12
1.3.3 4G SECURE CONTROL.......................................................13
1.4 SAFETY PRECAUTIONS........................................................14
1.4.1 ELECTROSTATIC DISCHARGE.................................................14
1.4.2 DEVICE HANDLING GUIDELINES..............................................15
CHAPTER 2 - PLANNING THE INSTALLATION.........................................16
CHAPTER OVERVIEW..............................................................16
2.1 PLANNING THE INSTALLATION.................................................16
2.1.1 RECOMENDED STEPS FOR A SUCCESSFUL INSTALLATION..........................17
2.1.2 REQUIREMENTS............................................................18
2.1.2.1 HARDWARE REQUIREMENTS.................................................18
2.1.2.2 COMPUTER REQUIREMENTS.................................................18
2.1.2.2.1 SECUREADMIN LITE SERVER REQUIREMENTS................................18
2.1.2.2.2 SECUREADMIN LITE CLIENT REQUIREMENTS................................19
2.1.2.2.3 MICROSOFT .NET FRAMEWORK 3.5 SP1 REQUIREMENTS.......................19
2.1.2.2.4 SUPPORTED OPERATING SYSTEMS.........................................19
2.1.2.2.5 SQL SERVER 2008 EXPRESS EDITION.....................................19
2.1.2.3 NETWORK REQUIREMENTS..................................................19
2.1.2.4 SOFTWARE REQUIREMENTS.................................................19
2.1.3 UNPACK EQUIPMENT........................................................20
2.1.3.1 PARTS LIST............................................................20
2.1.3.1.1 4G V-FLEX LITE, 4G CR-PASS..........................................20
2.1.3.1.2 4G SECURECONTROL....................................................21
2.1.3.1.3 DOCUMENTATION.......................................................21
2.1.4 CHOOSING THE INSTALL LOCATION...........................................22
2.1.4.1 4G V-Flex Lite and CR-Pass............................................22
2.1.4.2 4G SecureControl......................................................22
2.1.5 PLAN DEVICE NETWORK.....................................................22
2.1.6 CHOOSE NETWORK TYPE.....................................................23
2.1.6.1 RS-485 ...............................................................24
2.1.6.1.1 RS-485 CABLE SPECIFICATION..........................................24
2.1.6.1.2 RS-485 CABLE LENGTHS................................................25
2.1.6.1.3 RS-485 NETWORK TOPOLOGY.............................................25
2.1.6.2 ETHERNET..............................................................25
2.1.7 CHOOSE POWER SOURCE.....................................................26
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved iii
Contents
CHAPTER 3 - INSTALL SOFTWARE..................................................27
CHAPTER OVERVIEW..............................................................28
3.1 SECUREADMIN LITE SERVER...................................................29
3.1.1 REPAIRING AN INSTALLATION OF SECUREADMIN LITE SERVER....................34
3.1.2 UNINSTALLING SECUREADMIN LITE SERVER....................................35
3.1.3 UPGRADING AN INSTALLATION OF SECUREADMIN LITE SERVER....................36
3.2 SECUREADMIN LITE CLIENT...................................................36
3.2.1 MODIFYING AN INSTALLATION OF SECUREADMIN LITE CLIENT....................42
3.2.2 REPAIRING AN INSTALLATION OF SECUREADMIN LITE CLIENT....................43
3.2.3 UNINSTALLING SECUREADMIN LITE CLIENT....................................43
3.2.4 UPGRADING AN INSTALLATION OF SECUREADMIN LITE CLIENT....................44
CHAPTER 4 - INSTALL HARDWARE..................................................44
CHAPTER OVERVIEW..............................................................44
4.1 WALL-MOUNTING SCHEMES.....................................................45
4.2 INSTALLING A MOUNTING PLATE...............................................45
4.2.1 4G V-FLEX LITE AND 4G CR-PASS...........................................45
4.3 INSTALLATION HARDWARE.....................................................47
4.3.1 4G V-FLEX LITE AND 4G CR-PASS Quantity..................................48
4.4 ATTACH DEVICE TO MOUNTING PLATE...........................................48
4.4.1 4G V-FLEX LITE AND 4G CR-PASS...........................................48
4.5 CONNECT DEVICE TO POWER SOURCE............................................49
4.6 CONNECT DEVICE TO NETWORK.................................................51
4.6.1 ETHERNET NETWORK CONNECTIONS............................................52
4.6.2 RS-485 NETWORK CONNECTIONS..............................................52
4.7 SINGLE-DOOR CONTROLLER INSTALLATION.......................................52
4.8 AUX PORT..................................................................55
4.9 INSTALL FERRITE CORE......................................................57
CHAPTER 5 - SYSTEM START-UP PROCEDURES........................................57
CHAPTER OVERVIEW..............................................................57
5.1 SYSTEM START-UP PROCEDURES................................................59
5.1.1 DEVICE CONFIGURATION CHECK..............................................59
5.1.2 RS-232 TO RS-485 CONVERTER GROUND FAULT CHECK...........................59
5.1.3 DEVICE GROUND FAULT CHECK...............................................60
CHAPTER 6 - CONFIGURE DEVICE..................................................60
OVERVIEW......................................................................60
6.1 REGISTER DEVICE...........................................................61
6.1.1 TO REGISTER A NETWORKED DEVICE..........................................61
6.1.2 TO REGISTER A DEVICE VIA A CLIENT.......................................64
CHAPTER 7 - MAINTENANCE AND CLEANING..........................................68
CHAPTER OVERVIEW..............................................................69
7.1 CLEANING FINGER PRINT DEVICES.............................................70
CHAPTER 8 - TROUBLESHOOTING...................................................72
CHAPTER OVERVIEW..............................................................72
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved iv
Contents
8.1 INSTALLATION ERROR MESSAGES...............................................72
8.1.1 ERROR 1406 - INSUFFICIENT PRIVILEGES....................................72
8.1.2 ERROR 27552 - ERROR CREATING DATABASE...................................72
8.1.3 INVALID PASSWORD........................................................73
8.1.4 ERROR 27502 - USER NOT ASSOCIATED WITH TRUSTED SQL SERVER...............74
8.1.5 ERROR 27502 - SQL SERVER DOES NOT EXIST.................................75
8.1.6 INSUFFICIENT SYSTEM MEMORY..............................................76
8.1.7 OUT OF DISK SPACE.......................................................77
CHAPTER 9 - NOTICES...........................................................79
CHAPTER OVERVIEW..............................................................79
9.1 FCC and IC Information to Users ..........................................79
9.2 CE Information to Users...................................................81
9.3 Warning to Users..........................................................81
GLOSSARY......................................................................82
List of Figures
Figure 1-1 4G V-Flex Lite & CR-Pass............................................9
Figure 1-2 4G Secure Control..................................................10
Figure 1-3 4G V-Flex Lite.....................................................11
Figure 1-4 4G CR-Pass.........................................................12
Figure 1-5 4G Secure Control..................................................13
Figure 2-1 Correct Mounting Height............................................22
Figure 2-2 Example RS-485 System Diagram......................................23
Figure 2-3 Network Topologies Star and Daisy Chain Configurations.............25
Figure 3-1 Install Menu.......................................................29
Figure 3-2 SecureAdmin Lite Server Installation Wizard........................29
Figure 3-3 SecureAdmin Lite Server License Agreement..........................30
Figure 3-4 SecureAdmin Lite Server Choose Destination Location................31
Figure 3-5 Database Selection.................................................32
Figure 3-6 Connecting to SQL Server option....................................33
Figure 3-7 Upgrade Confirmation...............................................36
Figure 3-8 SecureAdmin Lite Server Installation Complete......................36
Figure 3-9 Menu...............................................................37
Figure 3-10 InstallShield Wizard..............................................37
Figure 3-11 Welcome Screen....................................................38
Figure 3-12 SecureAdmin Lite Client License Agreement.........................38
Figure 3-13 SecureAdmin Lite Client Choose Destination Location...............39
Figure 3-14 Fingerprint Placement Feedback Option Selection...................40
Figure 3-15 InstallShield Wizard Finished.....................................41
Figure 4-1 4G V-Flex Lite Flush-mount Mounting Plate (in mm)..................45
Figure 4-2 4G CR-Pass Flush-mount Mounting Plate (in mm)......................45
Figure 4-3 4G SecureControl Mounting Hole Locations (in mm)...................46
Figure 4-4 Connections for an External Wall Adapter (4G V-Flex Lite)..........49
Figure 4-5 Connections for an External Power Source (4G V-Flex Lite)..........49
Figure 4-6 Certification Marks................................................49
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved v
Contents
Figure 4-7 Power Over Ethernet Connection.....................................50
Figure 4-8 RJ45 Pin Location..................................................51
Figure 4-9 4G V-Flex Lite and 4G CR-Pass - Pin-out Diagram....................52
Figure 4-10 Connections for Internal Relay Operation..........................53
Figure 4-11 Connections for External Relay Operation..........................54
Figure 4-12 Location of Aux Port At the Bottom of the 4G V-Flex Lite..........55
Figure 4-13 USB Memory Key....................................................56
Figure 6-1 Network Sidebar Tab................................................61
Figure 6-2 Register via Server Dialog Box.....................................61
Figure 6-3 Server Communication Parameter.....................................62
Figure 6-4 Register Device Dialog Box.........................................63
Figure 6-5 Device Summary Dialog Box..........................................64
Figure 6-6 Step 1 Find Device Dialog Box......................................65
Figure 6-7 Step 2 Device Information Dialog Box...............................66
Figure 6-8 Step 3 Server Communication Parameter Dialog Box...................66
Figure 6-9 Step 4 Register Device Dialog Box..................................67
Figure 6-10 Device Summary Dialog Box.........................................68
Figure 8-1 Error 1406.........................................................72
Figure 8-2 Error 27552........................................................72
Figure 8-3 Invalid Password...................................................73
Figure 8-4 Error 27502 - User Not Associated..................................74
Figure 8-5 Error 27502 - Server Does Not Exist................................75
Figure 8-6 Insufficient System Memory.........................................76
Figure 8-7 Out of Disk Space..................................................77
List of Tables
Table 2-1 Communications Network Comparison...................................24
Table 2-2 Category 5 Cable Characteristics....................................24
Table 2-3 4G V-Flex Lite, CR-Pass, and SecureControl Power Requirements.......26
Table 4-1 PoE Pin Assignments.................................................50
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved
Introduction
CHAPTER 1 - INTRODUCTION
CHAPTER OVERVIEW
This chapter provides an introduction to the L-1 Identity Solution 4G Lite product family
devices. The 4G V-Flex Lite, 4G CR-Pass and 4G Secure Control, their specifications and
features, and safety guidelines that should be observed when using or handling the devices.
This manual provides step-by-step procedures for installing all L-1 Identity Solutions 4G Lite
devices. It covers the entire process of physically installing the device, making the necessary
power, ground, and network connections, and registering the device with the SecureAdmin
Lite administration software. Instructions for field repairs and cleaning are also provided.
1.1 SYMBOLS USED IN THIS GUIDE
The symbols shown below are used throughout this manual. They denote special issues the
user might encounter. Their definitions are given below.
DANGER
This symbol denotes a danger condition that may cause death or
excessive damage to property.
WARNING
This symbol denotes a warning condition that may cause severe
injury or major damage to property.
7
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved
Introduction
CAUTION
This symbol denotes a cautionary condition that may cause injury or
minor damage to property.
NOTICE
This symbol denotes a situation needing additional advice to avoid
incorrect usage.
8
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved
Introduction
1.2 PRODUCT OVERVIEW
1.2.1 4G V-FLEX LITE & CR-PASS
Figure 1-1 4G V-Flex Lite & CR-Pass
9
Part # 430-4G-050-00-005
© 2011 - L-1 Identity Solutions Inc. All rights reserved
Introduction
1.2.2 4G SECURE CONTROL
Figure 1-2 4G Secure Control
10
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
