Kyocera FS-9530DN Manual de usuario
DF-730
Operation Guide
Manuel d’utilisation
Guía de uso
Einführung
Guida alle funzioni
᪢Աᠠݡ
ঀဥ୰ྶ
This Operation Guide contains explanations in 7 different languages: English, French, Spanish, German,
Italian, Chinese and Japanese. Refer to the corresponding pages as indicated below for the language of your
choice.
Ce manuel d’utilisation contient des explications en 7 langues différentes: anglais, français, espagnol,
allemand, italien, chinois et japonais. Veuillez consulter les pages correspondant à votre langue comme indiqué
ci-dessous.
Este manual de instrucciones describe el funcionamiento en 7 idiomas: inglés, francés, español, alemán,
italiano, chino y japonés. Consulte las correspondientes páginas tal como se indica a continuación para el
idioma de su elección.
Diese Bedienungsanleitung enthält Erklärungen in 7 verschiedenen Sprachen: Englisch, Französisch,
Spanisch, Deutsch, Italienisch, Chinesisch und Japanisch. Gehen Sie für die Sprache Ihrer Wahl zu den
Seiten, die unten angeführt sind.
Questa guida operativa contiene spiegazioni in 7 lingue diverse: Inglese, Francese, Spagnolo, Tedesco, Italiano,
Cinese e Giapponese. Fare riferimento alle pagine corrispondenti come indicato sotto per la lingua prescelta.
本手册以英文、法文、西班牙文、德文、意大利文、中文、日文等 7 国语言进行说明。每种语言的说明，请参阅下列页
码。
本書は、英語・フランス語・スペイン語・ドイツ語・イタリア語・中国語・日本語の７言語で説明しています。
各言語での説明は下記のページをご覧ください。
English ............................................................................ Pages 1 to 10
Français .......................................................................... Pages 11 à 20
Español ........................................................................ Páginas 21 a 30
Deutsch ......................................................................... Seite 31 bis 40
Italiano ...................................................... Da pagina 41 a pagina 50
简体中文 ...................................................................... 第51页至第60页
日本語 ................................................................................ 61 ～70 ページ
1
• This Document Finisher can be installed on both copiers and printers.
• This Operation Guide focuses its explanations towards installation on copiers, but the same basic
procedure can be used to install this Document Finisher on a printer.
• The few places where the procedures differ are clearly indicated with separate explanations.
English
2
ALWAYS read this Operation Guide thoroughly
before use. After reading, maintain it in good
condition and keep it together with the Operation
Guide for your copier (or printer, as appropriate).
Refer to the Operation Guide for your copier (or
printer, as appropriate) for information on the service
representative for your product.
The sections of this Operation Guide and parts of this
product marked with symbols are safety warnings
meant to protect the user, other individuals and
surrounding objects, and ensure correct and safe
usage of the product.
The symbols and their meanings are indicated below.
DANGER: Indicates that serious injury
or even death will very possibly result
from insufficient attention to or incorrect
compliance with the related points.
WARNING: Indicates that serious injury
or even death may result from insufficient
attention to or incorrect compliance with
the related points.
CAUTION: Indicates that personal
injury or mechanical damage may result
from insufficient attention to or incorrect
compliance with the related points.
Symbols
The symbol indicates that the related section
includes safety warnings. Specific points of attention
are indicated inside the symbol.
........... [General warning]
The symbol indicates that the related section
includes information on prohibited actions. Specifics
of the prohibited action are indicated inside the
symbol.
........... [Warning of prohibited action]
........... [Disassembly prohibited]
The zsymbol indicates that the related section
includes information on actions which must be
performed. Specifics of the required action are
indicated inside the symbol.
........... [Alert of required action]
........... [Remove the power plug from the
outlet]
........... [Always connect the product to an
outlet with a ground connection]
Please contact your service representative to order a
replacement if the safety warnings in the Operation
Guide are illegible or if the Operation Guide itself is
missing. (fee required)
CONTENTS
INSTALLATION PRECAUTIONS...................... 3
PRECAUTIONS FOR USE.................................. 4
Names of parts ........................................................... 5
Cautions ..................................................................... 6
Types of modes [copier].............................................. 6
Sort: ON ........................................................... 6
Sort: OFF ......................................................... 6
Stapling............................................................ 6
Types of modes [printer]............................................ 7
Offset ejection .................................................. 7
Stapling............................................................ 7
Troubleshooting ......................................................... 7
Handling a paper jam...................................... 7
Replenishing staples........................................ 8
Handling a staple jam ..................................... 9
Specifications ........................................................... 10
3
INSTALLATION PRECAUTIONS
Environment
CAUTION
Avoid placing this product on or in locations
which are unstable or not level. Such locations
may cause the product to fall down or fall
over. This type of situation presents a danger
of personal injury or damage to the product.
Avoid locations near radiators, heaters, or
other heat sources, or locations near
flammable items, to avoid the danger of fire.
Other precautions
Adverse environmental conditions may affect the safe
operation and performance of this product. Install in
an air-conditioned room (recommended room
temperature: around 22°C (71.6°F), humidity: around
60%) and avoid the following locations when selecting
a site for the product.
• Avoid locations near a window or with exposure to
direct sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temperature
fluctuations.
• Avoid locations with direct exposure to hot or cold
air.
Handling of plastic bags
WARNING
Keep the plastic bags that are used with this
product away from children. The plastic may
cling to their nose and mouth causing
suffocation......................................................
4
PRECAUTIONS FOR USE
Cautions when using this product
WARNING
DO NOT place metallic objects or containers
with water (flower vases, flower pots, cups,
etc.) on or near this product. This type of
situation presents a danger of fire or
electrical shock should any water fall inside.
DO NOT damage, break or attempt to repair
the signal line. DO NOT place heavy objects
on the signal line, pull it, bend it
unnecessarily or cause any other type of
damage. These types of situations present
a danger of fire or electrical shock. ............
NEVER attempt to repair or disassemble
this product or its parts as there is a danger
of injury, fire or electrical shock. ................
If this product becomes excessively hot,
smoke appears, there is an odd smell, or any
other abnormal situation occurs, there is a
danger of fire or electrical shock. Turn the
power switch to the copier or printer OFF ({)
immediately, remove the power plug of the
copier or printer from the outlet and contact
your service representative. ........................
If anything harmful (paper clips, water, other
fluids, etc.) falls into this product, turn the
power switch to the copier or printer OFF ({)
immediately. Next, remove the power plug of
the copier or printer from the outlet to avoid
the danger of fire or electrical shock and then
contact your service representative. If you do
not take these steps, there is a danger of fine
or electrical shock. .......................................
ALWAYS contact your service representative
for maintenance or repair of internal parts.
CAUTION
For safety purposes, ALWAYS turn the
power switch to the copier or printer OFF ({)
and remove the power plug of the copier or
printer from the outlet when performing
cleaning operations on this product. ............
DO NOT touch the ejection tray when the
product is in operation as there is a danger
of injury. ........................................................
If dust accumulates within this product,
there is a danger of fire or other trouble.
It is therefore recommended that you consult
with your service representative in regard to
cleaning of internal parts. This is
particularly effective if accomplished prior to
seasons of high humidity.
Consult with your service representative in
regard to the cost of cleaning the internal
parts of the product as well. ........................
Other precautions
DO NOT place heavy objects on this product
or cause other damage to the product.
When lifting or moving the product, contact
your service representative.
Do not touch electrical parts, such as
connectors or printed circuit boards. They
could be damaged by static electricity.
DO NOT attempt to perform any operations
not explained in this Operation Guide.
5
(2) (1) (5) (4)
(3)
(7)
(6)
(1) Ejection tray
Copies and printouts will be ejected onto this tray.
(2) Ejection tray extension
Pull this extension out when you want to copy or
print onto 11" × 17", 8 1/2" × 14", B4 or A3 size
paper.
(3) Finisher release button
Push this button when you want to separate the
Document Finisher from the copier (or printer).
(4) Reversing unit cover
Open this cover if a paper jam occurs inside of the
Document Finisher.
(5) Top cover
Open this cover if a paper jam occurs inside of the
Document Finisher.
(6) Stapler cover
Open this cover when you want to replenish
staples.
(7) Staple holder
The staple cartridge is installed here. Pull out this
holder when you want to replenish staples.
Names of parts
6
Cautions • If finished copies or printouts come
out curled or are stacked unevenly,
turn the paper in the drawer[cassette]
over and reload it.
• While the Document Finisher is
turning the copy or printout over, that
paper will be visible (as shown in (1)
in the illustration). NEVER attempt
to grab the paper at this point.
Types of modes
[copier]
Sort: ON
This mode automatically sorts copies made
from multiple originals into identical sets.
Sort: OFF
This mode automatically groups copies made
from multiple originals, with all the copies
produced from an individual original grouped
together in one set.
Stapling
This mode automatically sorts and then
staples each copy set.
D
C
B
A
D
C
B
A
D
C
B
A
D
C
B
A
D
C
B
A
D
C
B
A
D
C
B
A
D
C
B
A
C
B
A
C
C
C
B
B
B
A
A
A
7
Types of modes
[printer]
Offset ejection
This mode automatically shifts each set of
printouts to the right and left in order to
separate each individual set in a staggered
fashion.
Stapling
This mode automatically staples each set of
printouts.
Troubleshooting
(Paper jam, replenishing staples and
staple jam)
Handling a paper jam
If a paper jam happens to occur, the
operation will stop, and an indication of the
cause of the jam will appear on the operation
panel of the copier (or the message display of
the printer).
1. Push the finisher release button to
separate the Document Finisher from the
copier (or printer).
2. Remove any jammed paper there. 3. Open the reversing unit cover and
remove any jammed paper inside that
cover.
4. Check the lower portion of the Document
Finisher (A) and remove any jammed
paper from that area.
D
C
B
A
D
C
B
A
D
C
B
A
D
C
B
A
(A)
8
5. Open the top cover and remove any
jammed paper inside that cover. 6. Close the top cover and the reversing
unit cover and reattach the Document
Finisher to the copier (or printer).
Replenishing staples
If an indication that staples have run out
appears on the operation panel of the copier
(or the message display of the printer),
perform the following procedure.
1. Open the stapler cover. 2. Pull out the stapler holder.
3. Remove the empty staple cartridge from
the staple holder. 4. Hold the staple holder in one hand and
the new staple cartridge in the other, and
set the new cartridge into the staple
holder paying due attention to the
direction of insertion.
* Insert in the direction of the arrow
shown on the staple cartridge.
5. Push the staple cartridge all the way into
the staple holder and then peel off the
paper tape that is attached to the
cartridge.
Otros manuales para FS-9530DN
4
Este manual sirve para los siguientes modelos
14
Tabla de contenidos
Idiomas:
Otros manuales de Acabador de Kyocera
Kyocera
Kyocera DF-770 Manual de usuario
Kyocera
Kyocera DF-780(B) Manual de usuario
Kyocera
Kyocera TASKalfa 250ci Manual de usuario
Kyocera
Kyocera DF-710 Manual de usuario
Kyocera
Kyocera KM-4530 Manual de usuario
Kyocera
Kyocera FS-9500DN Manual de usuario
Kyocera
Kyocera AK-730 Manual de usuario
Kyocera
Kyocera DF-730 Manual de usuario
Kyocera
Kyocera DF-650 Manual de usuario
Kyocera
Kyocera KM-3530 Manual de usuario
