KYLAND PTS-10 Manual de usuario

www.kyland.com 3

PTS-10

Time Server

Reference

Manual

PTS Series Time Server
- 1 -
Contents
Features...................................................................................................................... 2
1. Introduction..................................................................................................2
LCD.............................................................................................................................. 3
1. Main Screen..................................................................................................3
1.1. Time Infomation.................................................................................... 3
1.2. Status Infomation.................................................................................. 3
2. Indicator Light and Keys............................................................................... 3
3. Status Indication...........................................................................................4
3.1. System Reference Time......................................................................... 4
3.2. Time Reference Status...........................................................................4
3.3. PTP Mode.............................................................................................. 6
3.4. Sync Source........................................................................................... 6
Operations.................................................................................................................. 9
1. Settings......................................................................................................... 9
1.1. Setting Options......................................................................................9
1.2. Setting Confirmation............................................................................. 9
2. Sync Source Settings...................................................................................10
3. Clock Settings............................................................................................. 12
4. NTP Settings............................................................................................... 12
5. PTP Settings................................................................................................ 12
6. Output Settings.......................................................................................... 14
6.1. SO Output............................................................................................14
6.2. O1-O5 Output......................................................................................14
6.3. IRIG-B-AC Output................................................................................ 15
7. Network Settings........................................................................................ 15
Figure Index.....................................................................................................................17

PTS Series Time Server

- 2 -

1. Features

1.1. Introduction

[Figure 1- 1] PTS-10 Time Server

The PTS-10 Time Server is a standard time server. It supports high precision reference

clock, which can be synchronized to absolute time such as GPS, BDS, and GLONASS.

The reference clock can also be synchronized to local time source through an external

IRIG-B interface, PPS interface or other local time sources. Built-in OXCO help to

provide stable reference frequency source. System supports multiple sources time

sync auto selection algorithm which can perform stable switch between GPS, BDS,

GLONASS, IRIG-B, PTP and local clock, and sky/ground and master/slave clock backup.

PTS time server provides flexible time synchronization signal output slots which can

help to configure different timing output interface channel. The output timing

channels include PPS, PPM, 10M, IRIG-B (DC), IRIG-B (AC), Serial Time Signal (TOD etc.)

etc. Plus, PTS-10 supports network sync time protocols NTP/SNTP/ IEEE1588 V2.0.

IEEE1588 works in several modes by the software configuration including grandmaster

clock, slave clock and boundary clock. PTS-10 has LCD to show any status and do

configuration by keyboard. Meanwhile, PTS-10 is designed to send timing source

status and clock status to control center by IEC61850 MMS, IEC60870-T104, DNP3.0,

Modbus, etc.

PTS Series Time Server

- 3 -

2. LCD

2.1. Main Screen

The default main screen is shown as below:

[Figure 2- 1] PTS-10 Main Screen

The screen has two line characters. The top line always shows the time information.

The bottom line shows time server status.

2.1.1. Time Infomation

Time information includes time as the following format yyyy-mm-dd hh:mm:ss and PTP work

mode as M (Master), S (Slave) and B (Boundary).

[Figure 2- 2] PTS-10 Time Information

2.1.2. Status Infomation

Time server shows the current time source status and clock status. The detail information please

refers to section 2.3.

[Figure 2- 3] PTS-10 Status Information

2.2. Indicator Light and Keys

Press any key of front panel to view information and change parameters.

Name

Description

Show information as UP direction.

DOWN

Show Information as DOWN direction.

Enter

Confirm operation.

ESC

Cancel operation or Back to high level

PTS Series Time Server

- 4 -

Indicator light of front panel shows time server status.

Name

Description

PSW

On: Power On; Off: Power Off

SAT

On: Satellite Number >=4; Off: Satellite Number <4

ANT

On: Antenna is normal; Off: Antenna is abnormal

LOCK

Flash(1 second): Clock is locked;

Flash(3 seconds):Clock is holded;

Off: Clock is unlocked

NOTE: When screen backlight is off, press any key will ative screen again.

2.3. Status Indication

Time server will be shown as the following screen.

2.3.1. System Reference Time

The system reference time is shown at the first part of top line.

The time format is YYYY-MM-DD HH:MM:SS.mmm.

[Figure 2-4] System Reference Time

2.3.2. Time Reference Status

The time reference status is shown at bottom line.

For GPS time reference source, the first part of line named GPS is shown below.

[Figure 2-5] Time Reference (GPS)

For BDS time reference source, the first part of line named BDS is shown below.

[Figure 2-6] Time Reference (BDS)

For GLONASS time reference source, the first part of line named GLN is shown below.

[Figure 2-7] Time Reference (GLONASS)

PTS Series Time Server

- 5 -

For IRIG-B time reference source, the first part of line named IRIG is shown below.

[Figure 2-8] Time Reference (IRIG-B)

For PTP time reference source (i.e., the PTS-10 is working as PTP Slave Clock and

Boundary Clock), the first part of line is named PTP.

[Figure 2-9] Time Reference (PTP-Slave)

[Figure 2-10] Time Reference (PTP-Boundary)

For any kind of time reference source, the last part of line always shows time

synchronization mode. For seeking status, ‘SEEK’ is displayed; for initial status, ‘INIT’ is

displayed; for sync status, ‘SYNC’ is displayed; for lock status, ‘LOCK’ is displayed; for

time adjust status, ‘RCRV’ is displayed; for hold status, ‘HOLD’ is displayed.

[Figure 2-11] Sync Lock Mode (SEEK)

[Figure 2-12] Sync Lock Mode (INIT)

[Figure 2-13] Sync Lock Mode (SYNC)

[Figure 2-14] Sync Lock Mode (LOCK)

[Figure 2-15] Time Setting Mode (RCVR)

[Figure 2-16] Hold Mode (HOLD)

PTS Series Time Server

- 6 -

2.3.3. PTP Mode

The PTP mode is shown at last part of top line. The PTS-10 might work in one of the

following modes:

Master

PTP Grandmaster Clock

Slave

PTP Slave Clock

Boundary

PTP Boundary Clock

[Figure 2-17] PTP Mode

2.3.4. Sync Source

The sync source is shown at middle part of bottom line. The display format depends

on the sync source.

Use GPS as sync source, the display format is shown below:

GPS:xx Ant:xx Fix:xx

GPS

The amount of locked GPS satellites at present.

Ant

GPS antenna status. Following is the status introduction:

OK: antenna normal

UV: low antenna power supply voltage

NV: no antenna power supply voltage

OC: antenna over current

Fix

GPS fix mode. Following is the mode introduction:

3D: The best fix mode.

2D: 2D fix mode. Not enough tracked satellites

HD: Hold over. Just lost the tracking to satellites, but time

accuracy should be OK.

No: No fix. No satellites are tracked.

[Figure 2-18] Sync Source: GPS

PTS Series Time Server

- 7 -

Use BDS as sync source, the display format is shown below:

BDS:xx Ant:xx Fix:xx

BDS

The amount of locked BDS satellites at present.

Ant

BDS antenna status. Following is the status introduction:

OK: antenna normal

UV: low antenna power supply voltage

NV: no antenna power supply voltage

OC: antenna over current

Fix

BDS fix mode. Following is the mode introduction:

3D: The best fix mode.

2D: 2D fix mode. Not enough tracked satellites

HD: Hold over. Just lost the tracking to satellites, but time

accuracy should be OK.

No: No fix. No satellites are tracked.

[Figure 2-19] Sync Source: BDS

Use GLONASS as sync source, the display format is shown below:

GLN:xx Ant:xx Fix:xx

GLN

The amount of locked GLONASS satellites at present.

Ant

GLONASS antenna status. Following is the status introduction:

OK: antenna normal

UV: low antenna power supply voltage

NV: no antenna power supply voltage

OC: antenna over current

Fix

GLONASS fix mode. Following is the mode introduction:

3D: The best fix mode.

2D: 2D fix mode. Not enough tracked satellites

HD: Hold over. Just lost the tracking to satellites, but time

accuracy should be OK.

No: No fix. No satellites are tracked.

[Figure 2-20] Sync Source: GLONASS

Use IRIG-B as sync source, the display format is shown below:

PTS Series Time Server

- 8 -

IRIG-B-xx-xxx Frame: xxx

IRIG-B

IRIG-B input format. Following is the format introduction:

DC: IRIG-B DC

AC: IRIG-B AC

Modified Manchester Code

Frame

The number of IRIG-B input source frame

[Figure 2-21] Sync Source: IRIG-B-DC

Use PTP as sync source, the display format is shown below:

Off: xxxxxx Mode Delay: xxxxxx

Off

PTP Offset, the unit is ns

Mode

PTP Mode, E2E or P2P

Delay

PTP Delay, the unit is ns

[Figure 2-22] Sync Source (PTP-P2P)

[Figure 2-23] Sync Source (PTP-E2E)

Notes: When offset or delay is more than ±999999ns, character’*’ is displayed instead

of a number.

PTS Series Time Server

- 9 -

3. Operations

3.1. Settings

LCD screen might show data by ‘UP/DOWN’ key. Press ‘Enter’ key on any screen might

enter setting screen.

3.1.1. Setting Options

On main screen, select ‘Enter’ key to enter to setting configuration screen.

[Figure 3-1] Configuration Screen

Name

Description

Note

SYN

Sync source

settings

Set the external clock source including GPS, BDS, GLONASS,

IRIG-B, and PTP. Also set the priority for signal source, IRIG-B

time service and antenna time delay compensation, etc.

CLK

Clock settings

Set reference time as UTC or TAI, time zone offset and output

modes, etc.

NTP

NTP settings

Set NTP timing signal output, and time zone offset between

UTC in hour.

PTP

PTP settings

Set timing modes, sync time interval, delay time interval,

priority and vLAN etc.

OUT

Output settings

Set the output channel SO,O1~O5, and the output signal,

signal delay compensation, polarity, etc.

NET

Network settings

Set network IP address, subnet mask and operating modes.

3.1.2. Setting Confirmation

Any modified settings should be accepted password confirm. If wrong password, the

new configuration will not work.

As the following steps to finish password confirm:

Password Verify Screen

Use ‘UP/DOWN’ key to select password, then press ‘Enter’ key to confirm.

NOTE: The default password is 8.

Tabla de contenidos

Manuales populares de Servidor de tiempo de red de otras marcas

EKOS

EKOS EKOSync 1588 Manual de usuario

Meinberg

Meinberg LANTIME M200/GPS Manual de uso y cuidado

Meinberg

Meinberg LANTIME M600 Manual de uso y cuidado

Meinberg

Meinberg LANTIME M300/MRS/AD10-AD10 Manual de uso y cuidado

TPA

TPA S5 Manual de usuario

Meinberg

Meinberg LANTIME M300/GPS/2LNE/AD10-AD10 Manual de uso y cuidado

Gorgy Timing

Gorgy Timing LEDI NETWORK iTS Manual de usuario

Mobatime

Mobatime DTS 4160.grandmaster Manual de usuario

Meinberg

Meinberg LANTIME M300/GNS/RPS Manual de uso y cuidado

Mobatime

Mobatime DTS 4128.timeserver Manual de usuario

Meinberg

Meinberg IMS LANTIME M1000 Manual de usuario

BRG Precision Products

BRG Precision Products NTP100B Manual de usuario

Krontek

Krontek KT2000 Manual de usuario

Meinberg

Meinberg LANTIME M300/TCR Manual de uso y cuidado

Mobatime

Mobatime NTS Manual de usuario

Bodet Time

Bodet Time Sigma H Instrucciones y recetas

Bodet

Bodet NETSILON 7 AC Manual de usuario

Meinberg

Meinberg LANTIME M100 Manual de usuario