Kuppersberg Opera IS X 1HHM Instrucciones de instalación y mantenimiento

TECHNICAL PASSPORT

ПАСПОРТ ТЕХНИЧЕСКОГО ИЗДЕЛИЯ

EXTRACTOR HOOD

КУХОННАЯ ВЫТЯЖКА

Opera IS X 1HHM, Kaminox IS X 1HHM

TECHNICAL PASSPORT ENGLISH

Extractor hood

SECTION 1

SAFETY PRECAUTIONS.................................................................................................. 3

SECTION 2.

TERMS AND RULES OF USE ........................................................................................ 4

SECTION 3

SPECIFICATIONS................................................................................................................ 5

SECTION 4

CONTROL TYPE................................................................................................................... 5

SECTION 5

MOUNTING AND DIMENSIONS ................................................................................. 6

SECTION 6

CLEANING AND MAINTENANCE ............................................................................... 9

SECTION 7

TROUBLESHOOTING........................................................................................................ 10

SECTION 8

HELPFUL INFORMATION .............................................................................................. 11

CONTENTS

ENGLISH TECHNICAL PASSPORT

Extractor hood

DEAR CUSTOMER,

Thank you for purchasing

our equipment! We are sure that

appliances of the KUPPERSBERG

brand, which are modern, functional

and made of high quality materials

and components, will be a reliable

assistant in your kitchen.

Please read this manual carefully

before starting any installation work.

It will help you avoid premature

failure, as well as extend the life

of your appliance to the maximum

possible.

Please note that the installation

of this appliance must be carried

out by a qualiﬁ ed technician and in

accordance with these instructions.

The manufacturer is not liable for any

consequences of failure to observe

this condition.

Caution!

The manufacturer is not responsible

for any possible errors or misprints

in this manual. The manufacturer

reserves the right to make any changes,

without prior notice, to design, outside

appearance and scope of supply of

appliance, which will be considered as

necessary and useful according to the

SECTION 1.

SAFETY PRECAUTIONS

1. Assembling and electrical

connection of the appliance must be

carried out by skilled technicians of

authorized service center.

2. The appliance is to be connected

only to an earthed power supply

system.

3. Do not cook  ammable foods

below the kitchen air cleaner.

4. Use aluminum ﬁ lter that comes

with the appliance. The use of other

materials is prohibited!

5. Do not connect the appliance

to the power supply system, until

the assembly and installation of the

appliance is completed.

6. Do not use the appliance without

the aluminum ﬁ lter in place.

7. Do not touch the lamps.

8. Do not remove the aluminum

ﬁ lter while the appliance is in

operation.

9. Do not disconnect the appliance

from the power supply system directly.

If necessary, turn the appliance off

using the control panel and, only after

that, unplug it from the power supply

manufacturer’s point of view. Possible

modiﬁ cations will not affect the basic

properties, including those that relate

to safe operation of the appliance.

TECHNICAL PASSPORT ENGLISH

Extractor hood

system. When switching on: ﬁ rst

connect the appliance to the power

supply system, then switch it on using

the control panel, but not vice versa!

10. In case of any malfunctions,

contact your nearest authorized

service center.

11. If the kitchen hood is supposed

to operate in air discharge mode, then

during installation it is important to

provide a duct of the corresponding

diameter. To prevent loss of

performance caused by aerodynamic

resistance of the duct, the air duct

must not be too long, or curved. Never

restrict the duct size, or make sharp

bends. In addition, it is preferable to

use smooth PVC duct (round or  at),

rather than the  exible corrugated

one because bends of a corrugated

duct increase the noise level of the

hood.

12.The manufacturer does not bear

any responsibility for any possible

damage, in case of non-compliance

with above precautions.

SECTION 2.

TERMS AND RULES

OF USE

1. The appliance is designed

to operate on 220-240 V AC. Make

sure that the technical parameters

of your home power supply system

correspond to the data for the power

supply. If parameter values are above

or below the speciﬁ ed range, the use

of the appliance is prohibited.

2. Do not connect the kitchen air

cleaner to the ventilation channels

that are used to remove smoke and

fumes from the equipment operating

on any other energy sources except

electric one.

3. The appliance requires regular

cleaning and maintenance work.

4. When installing the appliance,

observe the required distance

between it and the cooking surface of

your stove:

- for an electric stove: at least 65

- for a gas or gas-electric stove: at

least 70 cm

5. Do not allow children to play

with packaging materials, it can be

dangerous!

6. The appliance is allowed to be

turned on only once the pots and/or

pans are placed on the stove.

7. For best air cleaning in your

kitchen, do not turn off the appliance

immediately after the cooking process

is completed: let the appliance run for

a further 15 minutes. For this purpose

you can also use the timer function

(the button «Auto Switch Off Timer»

on the control panel).

8. Ensure adequate ventilation in

the kitchen, if a gas stove is operated

simultaneously with the appliance.

ENGLISH TECHNICAL PASSPORT

Extractor hood

1- Decorative two-piece cover

2- Control panel

3- Air cleaner housing

4- Lamp

5- Aluminum ﬁ lter

6- Aluminum ﬁ lter latch

Island range hood

Width..............................900 mm

Control type .................Electronic (buttons)

Suction power.............1200 m /h

Lamps.............................Halogen 4х20 W

(or 2х20 W)

Diameter of the air

discharge pipe ............120-150 mm

Voltage...........................20-240 V / 50 Hz

Modes of operation...Air discharge /

Recirculation

Noise level ...................32-58 dB

SECTION 3

SPECIFICATIONS

Opera IS X 1HHM, Kaminox IS X

1HHM

SECTION 4.

CONTROL TYPE

Electronic control (buttons)

А – On/Off switch

В – «-» (minus) button

С – «+» (plus) button

D – Timer button

E – Lighting button

А – Hood motor On/Off

В – Motor rotation speed decrease

(suction power reducing)

С – Motor rotation speed increase

(suction power increasing)

D – When you press on the Timer,

the motor will automatically be shut

down after 15 minutes. To activate the

function, press and hold the Timer for

3 seconds (rotation speed level starts

to  ash on the display). To cancel, press

once on the Timer.

E – Lighting On/Off

TECHNICAL PASSPORT ENGLISH

Extractor hood

Mechanical control (buttons)

А – «Lighting» button

В – «0» button

С – «1» button

D – «2» button

E – «3» button

«Lighting» button – Lighting On/Off

«0» button - hood motor On/Off

«1» button - motor rotation speed 1

(initial level)

«2» button - motor rotation speed 2

«3» button - motor rotation speed 3

SECTION 5.

Mounting and dimensions

Please unpack and inspect the

appliance! Before starting installation,

make sure that the hood has no obvious

transport damages. If such defects are

detected, do not install or connect the

appliance to the mains.

1.To install the air cleaner above the

stove, draw a vertical line on the wall

from the center of the stove vertically

to the ceiling. To comply with safety

regulations, the distance between the

cooking surface and the air cleaner

should be 700 mm. Accordingly, make

a mark with a pencil on the vertical

line at a height of 700+426=1126 mm

from the surface of the stove. Draw a

horizontal line through this point on

the wall. Measure 100 mm on this line

to the right and left from the point

of intersection of the vertical and

horizontal lines and make marks with

a pencil. Using a 6-mm drill bit, drill

holes in these marks. Insert dowels in

the holes just drilled and ﬁ x the hooks.

2. Installation of decorative cover

Draw a horizontal line on a wall, at

a distance of 75 mm from the ceiling.

Measure 50 mm on this line to the right

and left from the point of intersection

with the vertical line and make marks

with a pencil. On these marks, drill the

holes, insert the 8-mm dowels in them

and tighten 2.5-mm screws which must

protrude 2 mm from the wall.

Step 1: Installation of hooks

Step 2: Installation of mounting

bracket

Step 3: Installation of housing

Step 4: Installation of external part

of decorative cover

Step 5: Installation of internal part

of decorative cover

1- Ø8 dowel

2- Mounting bracket

3- Hook

4- Internal part of decorative cover

5- External part of decorative cover

6- Air cleaner housing

7- Bushing adapter

8- Ø 2.5 screw

ENGLISH TECHNICAL PASSPORT

Extractor hood

OPERA IS X 1HHM

KAMINOX IS X 1HHM

TECHNICAL PASSPORT ENGLISH

Extractor hood

Step 2

Step 1

Kitchen stove

ENGLISH TECHNICAL PASSPORT

Extractor hood

SECTION 6.

Cleaning and maintenance

Caution! Before you start cleaning

the appliance, disconnect it from the

power supply.



Aluminum ﬁ lter is designed to trap

grease particles out of the  ow of air

running through it. For this reason,

the ﬁ lter needs regular cleaning. The

cleaning interval depends on the

frequency of use of the air cleaner.

Generally, it is recommended to clean it

once a month.

To do this, remove the ﬁ lters, wash

them in water with a neutral liquid

detergent, dry them, then set them back

in the air cleaner. Over time, ﬁ lters may

change color due to a regular washing.

This is a natural process, which does not

indicate a defect, so ﬁ lter replacement

is not required.

The aluminum ﬁ lters can be washed

in the dishwasher.

How to remove aluminum



1. Press on the latch of the ﬁ lter lock.

2. Pulling down a bit, remove the

ﬁ lter.

In order to put the ﬁ lters in place

after cleaning, follow the above

instructions in reverse order.



recirculated air mode)

Carbon ﬁ lter is designed to trap

odors and fumes while cooking.It is used

in cases where there is no possibility

to connect the air cleaner to a special

ventilation duct for discharging air

outward. When operating the appliance

with a carbon ﬁ lter, contaminated air is

sucked into the appliance and passes

through a carbon ﬁ lter, and then clean

air is supplied to the kitchen.

The carbon ﬁ lter should be replaced

at regular intervals. The interval of ﬁ lter

replacement depends on the frequency

of use of the air cleaner, style of cooking

and frequency of the aluminum ﬁ lter

cleaning. Generally, it is recommended

to replace the carbon ﬁ lter once every

4 months.



1. Remove aluminum ﬁ lters.

2. Turn the carbon ﬁ lter to the left

and pull it.

3. Replace the old carbon ﬁ lter with

the new one.

4. Put the ﬁ lter back into place.

If necessary, clean the outside of the

air cleaner with a soft, damp cloth. Do

not use any abrasive cleaning agents.

For painted stainless steel surfaces: to

avoid scratching it is recommended to

wipe them with a soft, damp cloth in the

painting direction. Do not remove the

lamp cover during the surface cleaning

process.

Caution!

Do not use the steam generators for

cleaning.

Caution!

Not following the above rules for

cleaning the appliance and replacing



TECHNICAL PASSPORT ENGLISH

Extractor hood

Replacing lamps

Before replacing lamps, disconnect the appliance from the power supply. Then,

with a screwdriver, pry and remove the lamp cover, while supporting it from below.

Remove the burned-out lamp and replace it with a new one. Put the lamp cover into

place, press it slightly and ﬁ x it. Caution: do not touch the halogen lamp with your

ﬁ ngers, it signiﬁ cantly reduces its lifetime. Use a soft, dry cloth.

Caution!



supply and proceed with disassembly. It is recommended that you transport it in the

original packaging. If this packaging is not available, package the appliance using

materials that prevent possible damage resulting from transportation.

SECTION 7.

Troubleshooting

Very often a malfunction of the appliance occur for minor reasons. So, before you

call for service center, please check whether you can troubleshoot yourself. For this

purpose please check the following possible causes of malfunctions.

Malfunction Possible cause Troubleshooting action

The appliance does not

operate

Faulty fuse

Plug is not properly

inserted into the outlet

There is no voltage in the

power supply system

1. Check the fuse of the

appliance

2. Make sure that plug is

properly inserted into the

outlet

Suction power is not

sufﬁ cient

Incorrect speed selected

Filters are clogged

1. Increase suction speed of

hood

2. Clean or replace ﬁ lters

The lamp is not

lighting

Faulty fuse

The lamp is burned out or

incorrectly installed

1. Check the fuse of the

appliance

2. Make sure that the lamp

is installed correctly or

replace it

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Campana de ventilación de Kuppersberg

Kuppersberg

Kuppersberg MOTUBA Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg LORA 90/60 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg INNOVA60 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg INBOX Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg T 601 X Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg F630-F930 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg DDA 990 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg INLINEA 52 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg F 951/651 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg RAMZ Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg Inlinea 52 LX Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg MINT 60 Manual de usuario

Kuppersberg

Kuppersberg SLIMLUX IV Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg T 939 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg F630 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg INLINEA 60 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg Slimlux II 50 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg DUDL8 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg SLIMBOX 60 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg WL-MOTUBA Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg TAIS Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg F 926 Instrucciones de instalación y mantenimiento

Kuppersberg

Kuppersberg T 939 ANT Manual de usuario

Kuppersberg

Kuppersberg SLIMLUX II Instrucciones de instalación y mantenimiento

Manuales populares de Campana de ventilación de otras marcas

emmeti

emmeti RECUPA MED A-140 Guía

Nibe

Nibe F135 Manual de usuario

Zephyr

Zephyr Spruce AK9834BS Guía de instalación

Hisense

Hisense MH6INBG Manual de usuario

Miele

Miele DA 1255 Manual de usuario

Broan

Broan 46000 Manual de usuario

GE Profile PV977 Instrucciones originales

FALMEC

FALMEC FFRIA24W5FS Manual de usuario

Whirlpool

Whirlpool RH2600XL-1 SERIES Manual de usuario

Küppersbusch

Küppersbusch DX ISLA Manual de usuario

ETNA

ETNA AV360RVS Manual de usuario

JUNO

JUNO JDF603E6 Manual de usuario

Miele

Miele DA 6708 D Manual de usuario

Tricity Bendix

Tricity Bendix LE 150 Manual

AEG

AEG X68163BV1 Manual de usuario

AEG

AEG 125 D Manual de usuario

Smeg

Smeg KSEV97X Manual de usuario

Nibe

Nibe S Series Guía del usuario