KSB RPHb Manual de usuario

Oil Mist Lubrication

RPHb

Supplementary Operating

Manual

Legal information/Copyright

Supplementary Operating Manual Oil Mist Lubrication

Original operating manual

KSB Aktiengesellschaft

or processed for any other purpose, nor otherwise transmitted, published or made available to a third

party without KSB´s express written consent.

Subject to technical modification without prior notice.

Contents

1 Supplementary Operating Manual .................................................... 4

1.1 General ............................................................................................................ 4

1.2 Uncooled pump ............................................................................................... 4

1.3 Cooled pump ................................................................................................... 4

1.4 General assembly drawing ............................................................................. 5

Contents

Oil Mist Lubrication 3 of 6

1 Supplementary Operating Manual

1.1 General

This supplementary operating manual accompanies the operating/installation

manual. All information contained in the operating/installation manual must be

observed.

Table 1: Relevant operating manuals

Type series Reference numbers of the operating/installation

manuals

RPHb 1316.8012, 1316.8013

1.2 Uncooled pump

1.2.1 Fitting the oil mist lubrication system

1. Unscrew plugs 916.N3 and 916.N4 from the bearing brackets.

2. Screw in the pipe unions NPT 1/4" (for oil mist inlet) and NPT 1/2" (for oil mist

outlet) and connect the oil mist pipework.

3. Apply oil mist quantities as stipulated by the manufacturers of the oil mist

lubrication units used.

1.2.2 Removing the oil mist lubrication system (conversion to oil-lubricated bearings)

1. Remove screw plugs 916.N2 and flat steel elements 99-6.N1.

2. Unscrew and remove the oil mist inlet and outlet lines from the respective

connections and close the connections with plugs 916.N3/.N4.

3. Open bearing covers 361.01/360.02 and place oil rings 644.01/.02 into the bearing

brackets.

4. Fit bearing covers 361.01/360.02 again.

5. Fit vent plugs 916.N1, constant-level oilers 638.01/.03 and protective cages

169-10.01/.03 on the bearing brackets.

1.3 Cooled pump

1.3.1 Fitting the oil mist lubrication system

1. Unscrew plugs 916.N3 and 916.N4 from the bearing brackets.

2. Screw in pipe unions NPT 1/4" (for oil mist inlet) and NPT 1/2" (for oil mist outlet)

and connect the oil mist pipework.

3. Run suitable flexible tubing from the oil sump overflows at the constant-level

oilers into the oil return lines.

1.3.2 Removing the oil mist lubrication system (conversion to oil-lubricated bearings)

1. Unscrew and remove the oil mist inlet and outlet lines from the respective

connections at the bearing brackets and close the connections with plugs

NPT 1/4”/NPT 1/2” (916.N3/913.03).

2. Remove the flexible tubing from the oil sump overflows of the constant-level

oilers.

3. Fit protective cages 169-10.01/.03 on the bearing brackets.

1 Supplementary Operating Manual

4 of 6 Oil Mist Lubrication

1.4 General assembly drawing

Fig. 1: Oil mist lubrication

Table 2: List of components

Part No. Description

69-10.03 Protective housing

99-6.N1 Semi-finished product (flat steel)

361.01/.02 Bearing end cover

411.70 Joint ring

642.03 Oil level sight glass

916.N1/.N2/.N3 Plug

1 Supplementary Operating Manual

Oil Mist Lubrication 5 of 6

KSB Aktiengesellschaft

67225 Frankenthal • Johann-Klein-Str. 9 • 67227 Frankenthal (Germany)

Tel. +49 6233 86-0 • Fax +49 6233 86-3401

www.ksb.com

1316.812/04-EN

Tabla de contenidos

Otros manuales de Bomba de agua de KSB

KSB

KSB CalioTherm Pro 25 Instrucciones de instalación

KSB

KSB EtaLine Pro Series Manual de usuario

KSB

KSB RPH-V Manual de usuario

KSB

KSB KWP-Bloc Instrucciones de instalación

KSB

KSB Rotex Instrucciones de instalación

KSB

KSB Ixo-Pro Instrucciones de instalación

KSB

KSB Riotec Series Manual de usuario

KSB

KSB Etanorm SYT Instrucciones de instalación

KSB

KSB CTN Instrucciones de instalación

KSB

KSB Calio Instrucciones de instalación

KSB

KSB Delta Solo Compact MVP Series Instrucciones de instalación

KSB

KSB Sewatec Instrucciones de instalación

KSB

KSB Magnochem Instrucciones de instalación

KSB

KSB Calio S Instrucciones de instalación

KSB

KSB Amarex N Manual de usuario

KSB

KSB Sewatec Series Manual de usuario

KSB

KSB AmaDrainer 3 Instrucciones de instalación

KSB

KSB Compacta UZ10.450D Instrucciones de instalación

KSB

KSB ILN Manual de usuario

KSB

KSB Sewabloc Series Instrucciones de instalación

KSB

KSB MK Instrucciones de instalación

KSB

KSB Omega Instrucciones de instalación

KSB

KSB Calio-Therm S NC/NCV Instrucciones de instalación

KSB

KSB AmaPorter SB 545 SE Instrucciones de instalación

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario