KSB Ama-Drainer N 301 Instrucciones de instalación

Submersible Motor Pump

Ama-Drainer N 301/302/303

60 Hz

Installation/Operating

Manual

Legal information/Copyright

Installation/Operating Manual Ama-Drainer N 301/302/303

Original operating manual

KSB Aktiengesellschaft

or processed for any other purpose, nor otherwise transmitted, published or made available to a third

party without KSB´s express written consent.

Subject to technical modification without prior notice.

Contents

Glossary ................................................................................................ 5

1 General ................................................................................................ 6

1.1 Principles .......................................................................................................... 6

1.2 Symbols ............................................................................................................ 6

2 Safety ................................................................................................... 7

2.1 Key to safety symbols/markings ..................................................................... 7

2.2 General ............................................................................................................ 7

2.3 Intended use .................................................................................................... 7

2.4 Personnel qualification and training ............................................................. 8

2.5 Consequences and risks caused by non-compliance with these operating

instructions ...................................................................................................... 8

2.6 Safety awareness ............................................................................................. 8

2.7 Safety information for the operator/user ...................................................... 9

2.8 Safety information for maintenance, inspection and installation work ..... 9

2.9 Unauthorised modes of operation ................................................................. 9

3 Transport/Temporary Storage/Disposal ........................................... 10

3.1 Checking the condition upon delivery ......................................................... 10

3.2 Transport ....................................................................................................... 10

3.3 Storage/Preservation ..................................................................................... 10

3.4 Disposal .......................................................................................................... 10

4 Description of the Pump (Set) .......................................................... 11

4.1 General description ....................................................................................... 11

4.2 Designation ................................................................................................... 11

4.3 Name plate .................................................................................................... 11

4.4 Design details ................................................................................................ 12

4.5 Configuration and function ......................................................................... 12

4.6 Scope of supply ............................................................................................. 13

5 Installation at Site ............................................................................. 14

5.1 Safety regulations ......................................................................................... 14

5.2 Checks to be carried out prior to installation ............................................. 14

5.3 Fitting the swing check valve and socket (if supplied unfitted) ................ 14

5.4 Adjusting the cut-in level control ................................................................ 15

5.5 Piping ............................................................................................................. 16

5.6 Installing the pump set ................................................................................. 16

5.7 Connection to power supply ........................................................................ 16

6 Commissioning/Start-up/Shutdown ................................................. 17

6.1 Start-up/shutdown ........................................................................................ 17

Contents

Ama-Drainer N 301/302/303 3 of 24

6.2 Operating limits ............................................................................................ 17

6.3 Shutdown/storage/preservation ................................................................... 17

6.4 Returning to service ...................................................................................... 17

7 Servicing/Maintenance ...................................................................... 18

7.1 Safety regulations ......................................................................................... 18

7.2 Servicing/inspection ...................................................................................... 18

7.3 Drainage/disposal .......................................................................................... 18

7.4 Dismantling/reassembling the pump set ..................................................... 18

7.5 Recommended spare parts stock .................................................................. 19

8 Trouble-shooting ............................................................................... 20

9 Related Documents ........................................................................... 21

9.1 Exploded view and list of components ........................................................ 21

10 EC Declaration of Conformity .......................................................... 22

Index .................................................................................................. 23

Contents

4 of 24 Ama-Drainer N 301/302/303

Glossary

Backflow

Waste water flowing back from the sewer into

the connected drainage piping

Cavitation damage

Material of the pump internals is destroyed by

imploding vapour bubbles.

Flood level

Maximum backflow level of waste water in a

drainage system

Hydraulic system

The part of the pump in which the kinetic

energy is converted into pressure energy

Pump

Machine without drive, additional components

or accessories

Pump set

Complete pump set consisting of pump, drive,

additional components and accessories

Submersible motor pump

Submersible motor pumps are floodable, close-

coupled units which are not self-priming. The

pumps are usually operated completely

submerged. They may be operated outside the

fluid for short periods of time, until the

minimum fluid level has been reached.

Waste water

Water consisting of a combination of water

discharged from households, industrial and

other businesses as well as surface water.

Glossary

Ama-Drainer N 301/302/303 5 of 24

1 General

1.1 Principles

This manual is supplied as an integral part of the type series and variants indicated

on the front cover. It describes the proper and safe use of this equipment in all

phases of operation.

The name plate indicates the type series and size, the main operating data, the order

number and the order item number. The order number and order item number

uniquely identify the pump (set) and serve as identification for all further business

processes.

In the event of damage, contact your nearest KSB service centre immediately to

maintain the right to claim under warranty.

1.2 Symbols

Table 1: Symbols used in this manual

Symbol Description

✓Conditions which need to be fulfilled before proceeding with the

step-by-step instructions

⊳Safety instructions

⇨Result of an action

⇨Cross-references

Step-by-step instructions

Note

Recommendations and important information on how to handle

the product

1 General

6 of 24 Ama-Drainer N 301/302/303

2 Safety

All the information contained in this section refers to hazardous situations.

2.1 Key to safety symbols/markings

Table 2: Definition of safety symbols/markings

Symbol Description

!DANGER

DANGER

This signal word indicates a high-risk hazard which, if not avoided,

will result in death or serious injury.

!WARNING

WARNING

This signal word indicates a medium-risk hazard which, if not

avoided, could result in death or serious injury.

CAUTION

This signal word indicates a hazard which, if not avoided, could

result in damage to the machine and its functions.

General hazard

In conjunction with one of the signal words this symbol indicates a

hazard which will or could result in death or serious injury.

Electrical hazard

In conjunction with one of the signal words this symbol indicates a

hazard involving electrical voltage and identifies information

about protection against electrical voltage.

Machine damage

In conjunction with the signal word CAUTION this symbol indicates

a hazard for the machine and its functions.

2.2 General

This manual contains general installation, operating and maintenance instructions

that must be observed to ensure safe pump operation and prevent personal injury

and damage to property.

The safety information in all sections of this manual must be complied with.

This manual must be read and completely understood by the specialist personnel/

operators responsible prior to installation and commissioning.

The contents of this manual must be available to the specialist personnel at the site

at all times.

Information attached directly to the pump must always be complied with and be

kept in a perfectly legible condition at all times. This applies to, for example:

▪Arrow indicating the direction of rotation

▪Markings for connections

▪Name plate

The operator is responsible for ensuring compliance with all local regulations not

taken into account in this manual.

2.3 Intended use

The pump (set) must only be operated within the operating limits described in the

other applicable documents.

▪Only operate pumps/pump sets which are in perfect technical condition.

▪Do not operate the pump (set) in partially assembled condition.

▪Only use the pump to handle the fluids described in the data sheet or product

literature of the pump model.

▪Never operate the pump without the fluid handled.

!DANGER

2 Safety

Ama-Drainer N 301/302/303 7 of 24

▪Observe the minimum flow rates indicated in the data sheet or product literature

(to prevent overheating, bearing damage, etc).

▪Observe the maximum flow rates indicated in the data sheet or product

literature (to prevent overheating, mechanical seal damage, cavitation damage,

bearing damage, etc).

▪Do not throttle the flow rate on the suction side of the pump (to prevent

cavitation damage).

▪Consult the manufacturer about any use or mode of operation not described in

the data sheet or product literature.

Prevention of foreseeable misuse

▪Never open discharge-side shut-off elements further than permitted.

– The maximum flow rate specified in the data sheet or product literature

would be exceeded.

–Risk of cavitation damage

▪Never exceed the permissible operating limits specified in the data sheet or

product literature regarding pressure, temperature, etc.

▪Observe all safety information and instructions in this manual.

2.4 Personnel qualification and training

All personnel involved must be fully qualified to install, operate, maintain and

inspect the machinery this manual refers to.

The responsibilities, competence and supervision of all personnel involved in

installation, operation, maintenance and inspection must be clearly defined by the

operator.

Deficits in knowledge must be rectified by means of training and instruction

provided by sufficiently trained specialist personnel. If required, the operator can

commission the manufacturer/supplier to train the personnel.

Training on the pump (set) must always be supervised by technical specialist

personnel.

2.5 Consequences and risks caused by non-compliance with these operating

instructions

▪Non-compliance with these operating instructions will lead to forfeiture of

warranty cover and of any and all rights to claims for damages.

▪Non-compliance can, for example, have the following consequences:

–Hazards to persons due to electrical, thermal, mechanical and chemical

effects and explosions

– Failure of important product functions

– Failure of prescribed maintenance and servicing practices

– Hazard to the environment due to leakage of hazardous substances

2.6 Safety awareness

In addition to the safety information contained in this manual and the intended use,

the following safety regulations shall be complied with:

▪Accident prevention, health and safety regulations

▪Explosion protection regulations

▪Safety regulations for handling hazardous substances

▪Applicable standards and laws

2 Safety

8 of 24 Ama-Drainer N 301/302/303

2.7 Safety information for the operator/user

▪Fit contact guards supplied by the operator for hot, cold or moving parts, and

check that the guards function properly.

▪Do not remove any contact guards during operation.

▪Provide the personnel with protective equipment and make sure it is used.

▪Contain leakages (e.g. at the shaft seal) of hazardous fluids handled (e.g.

explosive, toxic, hot) so as to avoid any danger to persons and the environment.

Adhere to all relevant laws.

▪Eliminate all electrical hazards. (In this respect refer to the applicable national

safety regulations and/or regulations issued by the local energy supply

companies.)

▪If shutting down the pump does not increase potential risk, fit an emergency-

stop control device in the immediate vicinity of the pump (set) during pump set

installation.

▪Make sure the system cannot be accessed by unauthorised persons (e.g. children).

2.8 Safety information for maintenance, inspection and installation work

▪Modifications or alterations of the pump are only permitted with the

manufacturer's prior consent.

▪Use only original spare parts or parts authorised by the manufacturer. The use of

other parts can invalidate any liability of the manufacturer for resulting damage.

▪The operator ensures that all maintenance, inspection and installation work is

performed by authorised, qualified specialist personnel who are thoroughly

familiar with the manual.

▪Only carry out work on the pump (set) during standstill of the pump.

▪The pump casing must have cooled down to ambient temperature.

▪Pump pressure must have been released and the pump must have been drained.

▪When taking the pump set out of service always adhere to the procedure

described in the manual. (⇨ Section 6.3 Page 17)

▪Decontaminate pumps which handle fluids posing a health hazard.

▪As soon as the work is completed, re-install and/or re-activate any safety-relevant

and protective devices. Before returning the product to service, observe all

instructions on commissioning.

2.9 Unauthorised modes of operation

Never operate the pump (set) outside the limits stated in the data sheet and in this

manual.

The warranty relating to the operating reliability and safety of the supplied pump

(set) is only valid if the equipment is used in accordance with its intended use. (⇨

Section 2.3 Page 7)

2 Safety

Ama-Drainer N 301/302/303 9 of 24

3 Transport/Temporary Storage/Disposal

3.1 Checking the condition upon delivery

1. On transfer of goods, check each packaging unit for damage.

2. In the event of in-transit damage, assess the exact damage, document it and

notify KSB or the supplying dealer (as applicable) and the insurer about the

damage in writing immediately.

3.2 Transport

CAUTION

Improper pump transport

Damage to the pump!

▷To transport the pump/pump set always use the handle provided.

▷Never suspend the pump (set) from the float switch (only type SE) or the power

supply cable for transport.

▷Prevent the pump (set) from getting knocked or dropped.

3.3 Storage/Preservation

CAUTION

Damage during storage by frost, humidity, dirt, UV radiation or vermin

Corrosion/contamination of the pump!

▷Store the pump (set) in a dry, dark, frost-proof room not exposed to sunlight

where the atmospheric humidity is as constant as possible.

Store the pump (set) vertically in a dry, dark, frost-proof room not exposed to

sunlight. Under these conditions it does not need additional preservation.

3.4 Disposal

WARNING

Fluids posing a health hazard and/or hot fluids

Hazard to persons and the environment!

▷Collect and properly dispose of flushing liquid and any residues of the fluid

handled.

▷Wear safety clothing and a protective mask, if required.

▷Observe all legal regulations on the disposal of fluids posing a health hazard.

1. Dismantle the pump (set).

Collect greases and other lubricants during dismantling.

2. Separate and sort the pump materials, e.g. by:

- Metals

- Plastics

- Electronic waste

- Greases and other lubricants

3. Dispose of materials in accordance with local regulations or in another controlled

manner.

3 Transport/Temporary Storage/Disposal

10 of 24 Ama-Drainer N 301/302/303

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bomba de agua de KSB

KSB

KSB Etanorm-RX Instrucciones de instalación

KSB

KSB Amacan P Instrucciones de instalación

KSB

KSB Etaline Instrucciones de instalación

KSB

KSB MK Instrucciones de instalación

KSB

KSB Rio-Eco N Series Instrucciones de instalación

KSB

KSB Movitec Series Instrucciones de instalación

KSB

KSB UPA Instrucciones de instalación

KSB

KSB Vitalobe Instrucciones de instalación

KSB

KSB Ama-Drainer-Box Mini Instrucciones de instalación

KSB

KSB Etaline-R Instrucciones de instalación

KSB

KSB Movitec VCI Instrucciones de instalación

KSB

KSB Calio Instrucciones de instalación

KSB

KSB Amarex Instrucciones de instalación

KSB

KSB Amarex KRT Instrucciones de instalación

KSB

KSB Calio Instrucciones de instalación

KSB

KSB CPKO Manual de usuario

KSB

KSB Amarex KRT Instrucciones de instalación

KSB

KSB UPAchrom CC Instrucciones de instalación

KSB

KSB RWCN Instrucciones de operación

KSB

KSB Amarex N Manual de usuario

KSB

KSB Etaseco Instrucciones de instalación

KSB

KSB Rio-Therm N SL Instrucciones de instalación

KSB

KSB Calio S BMS Instrucciones de instalación

KSB

KSB Etanorm FXV Instrucciones de instalación

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario