Krups B90 Manual de usuario

Couver ureB90onewayUS0827984-B.qxd:Couver ureB90onewa#2699F0.qxd29/01/089:20Page2

E GLISH

1 - IMPORTA T

SAFEGUARDS

When using electrical appliances, basic safety

precautions should always be followed to reduce the

risk of fire, electric shock, and/or injury to persons

including the following :

1. Read all instructions.

2. To protect against fire, electric shock and injury

to persons, do not place cord, plugs or

appliance in water or other liquid.

3. Close supervision is necessary when any

appliance is used near children. Keep appliance

out of reach of children. Product not intended

for use by children.

4. Unplug from outlet when not in use and before

cleaning. Allow to cool before putting on or

taking off parts, and before cleaning the rest

of the appliance.

5. Do not operate any appliance with a damaged

cord or plug or after the appliance malfunctions,

or has been damaged in any manner. Return

appliance to your nearest authorized KRUPS

Service Center for examination, repair or

adjustment (see Limited Warranty).

6. The use of an accessory not evaluated for use

with this appliance by KRUPS may result in fire,

electric shock or injury to persons.

7. Do not use outdoors.

8. Do not let cord hang over edge of table or

counter, or touch hot surfaces.

9. Do not place on or near a hot gas or electric

burner, or in a heated oven.

10. To disconnect, turn the control to «off» then

remove plug from wall outlet.

11. Do not use appliance for other than intended

use.

12. Appliance for household indoor use only.

13. Do not immerse in water.

SAVE THESE I STRUCTIO S

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page2

E GLISH

2 General information

The BeerTender®is designed to dispense chilled beer in

a domestic setting. Only a Heineken®5 iter

DraughtKegTM and Heineken Premium ight®5 iter

DraughtKegTM can be used with the BeerTender. You

should not use any other commercially available beer

containers or kegs. Do not introduce any materials other

than the DraughtKeg inside the appliance.

BeerTender is designed for use by responsible adults of

legal drinking age.

Guidelines for reading these instructions

* The warning triangle indicates instructions that are

important for the userʼs safety.

* Please adhere strictly to these directions to ensure

proper use and avoid serious injury!

* This symbol highlights information that is especially

important for making the best use of the machine.

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page4

E GLISH

3 - Product description

BeerTender Components

1. BeerTender at home draughting system

2. id

3. ED Control panel

4. Tap cover

5. Press-in panel to open lid of BeerTender

6. Dispensing pour spout

7. Beer tap handle

8. Drip grate

9. Drip tray

10. ON/OFF switch

11. Power cord with plug

DraughtKegTM Components

12. 5 iter DraughtKeg (not included)

13. Draught beer tube (should be changed with each

new DraughtKeg)

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page5

E GLISH

4 - Before use

Child Safety Lock

* Make sure that children can not play with the

appliance.

* Do not leave the materials used to pack the appliance

within childrenʼs reach.

* To prevent children from using the appliance, you can

remove the tap handle. To remove the handle, make

sure that it is in an upright position and pull upward.

Fire prevention

In the event of a fire, use carbon dioxide (CO2)

extinguishers.

Do not use water or powder extinguishers.

Setup and Maintenance

* Install the BeerTender® in an upright position in a safe

place.

* To ensure that the BeerTender works correctly and

efficiently, the following is strongly advised.

* Place it on a perfectly level and stable surface;

* Choose a clean, well-lit area with an easily accessible

electric socket.

* Keep the appliance at a minimum distance (4 inches)

from the stove as shown in the diagram.

* Keep the appliance at a minimum distance

(2 ½ inches) from the walls.

* Store the DraughtKegTM at room temperature or in the

refrigerator.

* Make sure the BeerTender is not exposed to direct

sunlight.

* Do not use the BeerTender outdoors.

* Do not place the BeerTender on very hot surfaces or

near open flames, as these may melt or damage the

casing.

* Your BeerTender uses a technology that delivers

ultimate cooling results when the ambient temperature

is between 54°F and 86°F. At colder temperatures, the

appliance cooling system could be damaged. At

warmer temperatures, the cooling system will not be

able to reach the temperature you program.

Warning! To avoid overheating, always keep the

BeerTender appliance out of direct sunlight. To obtain

good cooling performance, never install your machine in

a room with an ambient temperature above 86°F.

54°F

86°F

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page6

E GLISH

5 - Using the BeerTender®System

* Always hold the appliance by the bottom edge when

lifting.

* To obtain draught beer of optimal quality you should

keep two basic factors in mind, the temperature of the

beer and hygienic conditions. Follow these few simple

steps for the ideal use of BeerTender.

A new draught beer tube should be used with

each DraughtKegTM

An initial package of draught beer tubes is included

with your machine. Additional draught beer tubes

can be purchased from Heineken. Go to

www.BeerTender.com for more information.

Chilling the DraughtKeg

1. Before pouring a draught beer, it is very important that

the Heineken and Heineken Premium ight

DraughtKeg reach the correct temperature.

2. Ensure DraughtKeg is sufficiently chilled before

pouring a draught beer. Insufficiently chilled

DraughtKegs will produce too much foam. It is ideal to

purchase the DraughtKeg pre-chilled or pre-chill over

night before intended use. If the DraughtKeg needs

additional chilling, there are 2 recommended options:

a. Inside the BeerTender – Depending on the

temperature of the DraughtKeg, it will take up

to 18 hours to chill to the ideal serving

temperature.

b. In a refrigerator – Depending on the

temperature of your refrigerator, it will take up to

12 hours to chill to the ideal serving temperature.

Tip: We recommend that you always keep an extra

DraughtKeg in your refrigerator to always have a chilled

keg available.

Preparing the BeerTender

IMPORTA T: It is important that the BeerTender power

switch is turned on before inserting the DraughtKeg. This

allows the scale to reset and accurately measure the

amount of beer left in the keg. If you remove a partially

full DraughtKeg from an operating machine or open the

lid while power is on, the scale will need to be reset.

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page7

E GLISH

Simply open the lid and lift up the keg for approximately

5-10 seconds before setting back into the machine and

closing the lid.

* After setting up the BeerTender and before use, it is

vital to clean the detachable pour spout – this is the

only part of the appliance that will come into contact

with the beer. The spout should be rinsed by hand.

After cleaning, screw back into place.

* Before inserting the DraughtKeg into the BeerTender,

simply snap the patented disposable draught beer

tube (included) onto the DraughtKeg.

* Open the BeerTender cover by pressing in the release

panel on the front of the machine.

* Open the tap spout cover by turning counter

clockwise.

* Insert DraughtKeg into BeerTender and position the

draught beer tube as shown on drawing.

* Close the tap by turning clockwise and snapping into

place.

* Carefully close the lid.

* Set the drip tray and grate in place at the front of the

appliance. Make sure the drip tray is properly fitted

and positioned.

WAR I G! The drip tray must be positioned on a level

surface and must not jut out from the surface it is resting

on.

Control Panel

Your appliance features a large display providing you

with important and useful information.

°F

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page8

E GLISH

On the left side of the display:

a. Volume indicator

The BeerTender DraughtKeg volume is indicated with 4

levels.

The 4 levels are visible when the DraughtKeg is full.

They disappear progressively while emptying the

DraughtKeg. The last level starts to blink when only two

glasses of beer (+ / - one) are left in the DraughtKeg.

On the right side of the display:

b. Temperature indicator

The temperature indicator goes from red, for a beer that

is too warm, to orange when cooling of the beer is

almost complete, to green when the perfect draught

beer temperature has been reached.

Warning: never use your BeerTender with ambient

temperature above 86°F. Above that level, the ideal

serving temperature can not be attained.

Pouring a beer from the BeerTender

* Before pouring a beer, rinse a clean glass in cold

water which chills the glass and wets the inside to

enable a perfectly smooth draught pour. Use of 8 oz

glasses is recommended to maintain the ideal serving

temperature.

Draught and Drink

* Be aware that the first glass you pour from every new

DraughtKeg will contain mostly foam. This is typical of

draught beer. Allow the foam to settle and continue to

pour.

* Tilt and pour: Tilt your glass at a 45 degree angle as

you pour and adjust upright as the glass fills.

* Ensure you pull the tap handle all the way down. Not

opening the handle all the way will result in excessive

foam.

* For the optimal draught beer drinking experience,

serve your beer with a foam head of 2 fingers in height

(approximately 1.5”).

Proper Care and Cleaning of your BeerTender

* The drip tray and grate should be emptied and

cleaned after each use.

°F

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page9

* Before cleaning the appliance, it is essential to turn off

the ON/OFF switch and then pull the plug out of the

socket.

* Keep in mind that during use the drip tray will

have to be emptied and rinsed regularly.

The tray and grate are dishwasher safe or can be

washed by hand with a mild detergent. Dry completely.

* Always wipe down the interior of the BeerTender after

use. Beer is a natural product that can spoil.

Therefore, you should always keep the appliance

clean to maintain the quality of the beer dispensed and

avoid unpleasant odors.

* Rinse the pour spout between uses for optimal results.

Handwash with warm soapy water. Do not wash in

dishwasher.

* To remove, unscrew turning counterclockwise

from main unit. To re-attach, simply screw back

in place turning clockwise.

* You should never attempt to access internal parts of

the appliance.

IMPORTA T: After cleaning, ensure all parts of your

BeerTender®have completely dried before closing

the lid.

Storing the BeerTender®

* When the BeerTender is not being used for a long

period of time, remove the DraughtKegTM and turn the

control to “off”.

* Remove the plug from the power outlet.

* Store the BeerTender at room temperature in a dry

place out of childrenʼs reach.

* Protect from dust and dirt.

E GLISH

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page10

6 - Troubleshooting

E GLISH

The appliance

does not turn on.

The appliance is

not connected to

the main power

supply.

Connect the

appliance to the

power supply.

No beer is being

dispensed.

The appliance is

off.

Switch the

appliance on.

The DraughtKeg

is empty.

Replace the

DraughtKeg with

a new one.

There is not a

DraughtKeg

inside the

BeerTender

appliance.

Install a

DraughtKeg

inside the

BeerTender

appliance.

The BeerTender

appliance tap

handle is not

correctly installed/

positioned.

Install/position the

tap correctly.

Problem Possible causes Solutions

1-BeertenderonewayB90US.qxd:1-B95onewayAm terdam_UK.qxd29/01/089:22Page11

Tabla de contenidos

Otros manuales de Electrodoméstico de cocina de Krups

Krups

Krups Beerlender VB2158 Manual de usuario

Krups

Krups F608 Manual de usuario

Krups

Krups XL2000 Manual de usuario

Krups

Krups COOK4ME+ GRAMEEZ Manual de usuario

Krups

Krups ZY501 Manual de usuario

Krups

Krups AJ1000 Manual de usuario

Krups

Krups SEMI PRO TR522341 Manual de usuario

Krups

Krups BeerTender Manual de usuario

Krups

Krups ZY403 Manual de usuario

Krups

Krups Cook4Me Manual de usuario

Krups

Krups FDK 451 Manual de usuario

Krups

Krups THE TORP Manual de usuario

Krups

Krups THE SUB Manual de usuario

Krups

Krups PREP EXPERT 9000 Manual de usuario

Krups

Krups BeerTender IB95 Manual de usuario

Krups

Krups Vacupack Plus 380 Manual de usuario

Krups

Krups B80 Manual de usuario

Krups

Krups SANDWICH MAKER FDK4 Series Manual de usuario

Krups

Krups CZ9128 Manual de usuario

Krups

Krups BeerTender Manual de usuario

Krups

Krups ZY403851 Manual de usuario

Krups

Krups Beertender VB45 Manual de usuario

Krups

Krups FDE3 Manual de usuario

Krups

Krups Extra Crisp Manual de usuario

Manuales populares de Electrodoméstico de cocina de otras marcas

Tayama

Tayama TYG-35AF Manual de usuario

AEG

AEG 43172V-MN Manual de usuario

REBER

REBER Professional 40 Guía del usuario

North American

North American BB12482G / TR-F-04-B-NCT-1 Manual de usuario

Presto

Presto fountain popper Manual de usuario

Westmark

Westmark 1035 2260 Manual de usuario

Zanussi

Zanussi ZCG64396XA Manual de usuario

HOFFEN

HOFFEN SM-9302M Manual de usuario

Philips

Philips HD3133 Manual de usuario

Ronco

Ronco Beef Jerky Manual de usuario

Hendi

Hendi 470411 Manual de usuario

Livoo

Livoo MEN386 Manual de usuario

Vogue

Vogue D446 Manual de usuario

croydon

croydon WR-10313-700 Manual de usuario

ADE

ADE AUTOMATIC-L Manual de usuario

Chefman

Chefman RJ43-SQ Series Manual de usuario

Vacmaster

Vacmaster VP680 Manual de usuario

Jetmaster

Jetmaster 900HG Manual de usuario