Kroy K4020 Manual de usuario
K4020/K4030 USER MANUAL
User Manual
Version
Issue Date
: K4020/K4030 series
: Rev 1.5
: 2021.07.22
Thermal / Thermal Transfer Desk-Top Printer Series
On Demand - Label, tag, self-laminating cable markers
and heat shrink tubing* printing
* requires optional “slot in”printer guide adapters (see p.35)
K4030 shown with optional
external spool holder
Table of Contents
G500 Series
1 Barcode Printer
1-1 Box Content
1-2 Getting To Know Your Printer
2 Printer Setup
2-1 Open The Printer Cover
2-2 Open The Printing Mechanism
2-3 Loading The Ribbon
2-4 Loading The Label Roll
2-5 Installing The Label Supply Hub
2-6 Preparing For Tag Printing
2-7 Connecting The Printer To The Host Computer
2-8 Installing The Driver
3 Operation Panel
3-1 LED Operation Panel
3-2 Label size calibration and Self Test Page
3-3 Error Alerts
...............................................................................................................
......................................................................................................................
............................................................................................
...................................................................................................................
....................................................................................................
.........................................................................................
.........................................................................................................
.....................................................................................................
.......................................................................................
................................................................................................
................................................................
..........................................................................................................
..............................................................................................................
........................................................................................................
.........................................................................
........................................................................................................................
..................................................................................................
....................................................................................
..............................................................................................
001
001
002
004
004
004
005
007
009
010
011
012
015
015
016
017
P/N : 920-014011-00
4 NetSetting for Ethernet
4-1 Installing The NetSetting Software
4-2 The Interface Of NetSetting
5 Accessories
5-1 Installing The Label Dispenser
5-2 Installing The Cutter
6 Maintenance And Adjustment
6-1 Cleaning The Print Head
6-2 Adjusting The Print Head Pressure
6-3 Adjusting The Print Line
6-4 Adjusting The Cutter
6-5 Troubleshooting
Appendix
.....................................................................................................................
..........................................................................................
..........................................................................................................
.......................................................................................
..................................................................................................
...................................................................................
....................................................................................................
..........................................................................................................
................................................................................................................
018
019
020
026
027
032
036
036
036
037
037
038
TABLE OF CONTENTS
G500 Series
Declaration
P/N : 920-014011-00
FCC COMPLIANCE STATEMENT
FOR AMERICAN USERS
This equipment has been tested and found to comply with the limits for a CLASS A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at own expense.
EMS AND EMI COMPLIANCE STATEMENT
FOR EUROPEAN USERS
This equipment has been tested and passed with the requirements relating to electromagnetic compatibility
based on the standards EN 55022:2006/A1:2007 Class A, EN61000-3-2:2006, EN 61000-3-3:2008 and
EN55024:1998/A1:2001/A2:2003, IEC 61000-4-2:2008 series, The equipment also tested and passed in
accordance with the European Standard EN55022 for the both Radiated and Conducted emissions limits.
. SERIES
TO WHICH THIS DECLARATION RELATES
IS IN CONFORMITY WITH THE FOLLOWING STANDARDS
IEC 60950-1:2005(2nd Edition)+Am 1:2009, GB9254-2008 (Class A ) ; GB17625. 1-2003; GB4943.1-2011,
EN 55022:2006/A1:2007 Class A, EN61000-3-2:2006, EN 61000-3-3:2008 and EN55024:1998/A1:2001/A2:2003,
IEC 61000-4-2:2008 series, UL 60950-1, 1st Edition, 2007-10-31, CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07,
CFR 47, Part 15
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
㭋ḡClass AẎ⒨Ə✏䔆㴢䎖⡪ḔƏ富Ẏ⒨⏖僤怇ㇷ㗇亦䔜⹙㉗Ə✏忀䦴ガ↜Ə⏖僤曧奨䔏㈞⯠⅝⹙㉗憮⎽⇮⮅⏖堳
䙫㎑㖤˛
SAFETY INSTRUCTIONS Please read the following instructions carefully.
Keep the equipment away from humidity.
Before you connect the equipment to the power outlet, please check the voltage of the power
source.
Make sure the printer is off before plugging the power connector into the power jack.
It is recommended that you connect the printer to a surge protector to prevent possible
transient overvoltage damage.
Be careful not to get liquid on the equipment to avoid electrical shock.
For safety and warranty reasons, ONLY qualified service personnel should open the equipment.
Do not repair or adjust energized equipment under any circumstances.
Safety Instructions
P/N : 920-014011-00
G500 Series
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the equivalent type recommended by
the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Only use with designated power supply adapter model.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
1
Barcode Printer
1 Barcode Printer
G500 Series
Box Content
Please check that all of the following items are included with your printer.
Barcode Printer
Power Cord
AC Adapter
USB Cable
Ribbon
Label Stock
1-1
Ribbon Hubs ( set of 2 )
Empty Ribbon Core
Label Supply Hub
Label Guide Plates ( set of 2 )
Quick Reference Guide
CD ( with QLabel software / user manual )
2
1 Barcode Printer
G500 Series
Getting To Know Your Printer
Device Overview
Front View
Rear View
1-2
TOP COVER
COVER OPEN BUTTONS
Release buttons for opening the printer cover
FRONT COVER
SERIAL PORT ( RS-232 )*
POWER SWITCH
- ON
- OFF
FAN-FOLD LABEL INSERT
Feed slot for external label feeding
POWER JACK
USB PORT
Barcode Printer
OPERATION PANEL
The combination of connection ports may vary with printer model.
NOTICE
ETHERNET PORT*
3
1 Barcode Printer
G500 Series
Open The Printer Cover
Open The Printing Mechanism
ADJUSTMENT SCREW ( LEFT )
Screw for adjusting the print head pressure ADJUSTMENT SCREW ( RIGHT )
Screw for adjusting the print head pressure
LABEL SUPPLY MODULE
- LABEL SUPPLY HUB
- LABEL GUIDE PLATES ( SET of 2 )
RIBBON MODULE
- RIBBON FEED MECHANISM
- RIBBON HUB
- EMPTY RIBBON CORE
LABEL GUIDE ( RIGHT )
RELEASE CATCH ( RIGHT )
RIBBON SUPPLY HUB
RELEASE CATCH ( LEFT )
LABEL GUIDE ( LEFT )
PRINTING MECHANISM
PLATEN
LABEL SENSOR
Movable
ADJUSTMENT SCREW
Screw for adjusting
the print line
Barcode Printer
4
2 Printer Setup
G500 Series
Open The Printer Cover
Pressing The Cover Open Buttons
Place the printer on a flat surface. Open the printer cover by pressing the release buttons on both sides of the
printer housing and lift the cover.
Open The Printing Mechanism
Pressing The Release Catches
Release and lift the printing mechanism.
2-1
Pressing the button
COVER OPEN BUTTONS
Release buttons for opening the printer cover.
Pressing the button
Lift the printer cover backward
Lift the printing mechanism
Pressing
Pressing
RELEASE CATCHES
2-2
Printer Setup
5
2 Printer Setup
G500 Series
Loading The Ribbon
A New Ribbon Module Installation
Place the new ribbon on the hub which forms a ribbon supply hub.
Place the empty ribbon core on the hub which forms a ribbon rewind hub.
Stick the ribbon supply hub on the ribbon rewind hub and wind the rewind hub 2~3 circles.
2-3
RIBBON SUPPLY HUB
Place on the hub
RIBBON HUB NEW RIBBON
Place on the hub
EMPTY RIBBON CORERIBBON HUB
RIBBON FEED MODULE
Printer Setup
Wind the ribbon around the core
6
2 Printer Setup
G500 Series
Install The Ribbon On The Printer
Place the ribbon supply hub at the back of the printing mechanism.
Pass the ribbon supply hub under the print head.
Insert the ribbon rewind hub on the ribbon feed mechanism.
Close the printing mechanism, making sure that it clicks into place.
Place on the printing mechanism
RIBBON FEED MECHANISM
Wind to the back
Insert into the printing mechanism
Printer Setup
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Impresora de Kroy
