Kraun KN.2D Manual de usuario
I
www.kraun.it
Cod. KN.2D
Warning
The manufacturer is under no circumstances liable for any unauthorised modifications made to
the product by the user or any other parties which may compromise its conformity and safety.
User’s Manual
Wireless-N DUAL ANTENNA
adapter 300Mbps
2 www.kraun.it www.kraun.it 3
Chapter 1. Product Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 LED Indicator Description 5
1.2 Product Features 5
1.3 Before Installation 5
1.4 Disable other manufacturers’ wireless network adapters 6
1.5 Product Maintenance 7
Chapter 2. Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 Hardware Installation 8
2.1.1 Install the USB network adapter 8
Chapter 3. How to use the Windows Built-in Wireless Conguration. . . . . 12
3.1 Wireless Network Connection under Windows 12
Chapter 4. Kraun Wireless Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.1 Station mode (Client Mode) 14
Main interface for station mode 14
4.1.1 Site Survey 15
4.1.2 Link Information 17
4.1.3 Prole 19
1. Infrastructure Prole Management 21
2. Ad-Hoc Prole management 23
4.1.4 Advanced 28
4.1.5 About 29
4.1.6 Help 29
4.2 AP mode 29
4.2.1 Cong AP 31
4.2.2 Advanced 33
4.2.3 Access Control List 34
Access Policy: 34
4.2.4 Associate List 35
4.2.5 AP Mode under Windows 7 36
Chapter 5. Appendix 1: Acronyms and Terms . . . . . . . . . . . . . . . . . . . 37
Chapter 6. Appendix 2: How to Set WPS . . . . . . . . . . . . . . . . . . . . . . . 38
Chapter 7. Appendix 3: FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4 www.kraun.it
Manual
www.kraun.it 5
Chapter 1. Product Introduction
1.1 LED Indicator Description
There is one status LED indicator on the side of the wireless network adapter. It lights
up and stays ON when working correctly, and ashes when transferring data.
1.2 Product Features
hSupports soft AP feature
hDetects wireless network and adjusts transmitting rate automatically
hProvides two working modes: Infrastructure and Ad-Hoc
hSupports WEP data encryption and WPA-PSK/WPA2-PSK encryption methods
hSupports WPS (Wi-Fi Protected Setup) encryption to secure your wireless
network
hComplies with Windows 7/XP/ 2000/Vista, Linux, etc.
1.3 Before Installation
1. Please read through the whole user guide before you install and use this
product.
2. Please close or uninstall the conguration programs of other manufacturers’
before you install the conguration programs of Kraun network adapters to
avoid possible UI (user interface) conict.
3. To avoid possible network conicts between this Kraun network adapter and
those of other manufactures’, we recommend that you rst disable the network
adapters of other manufacturers before installaing the driver.
6 www.kraun.it
Manual Manual
www.kraun.it 7
1.4 Disable other manufacturers’ wireless network adapters
1. Right click “My Computer” and select “Manage”
2. On the Computer Management screen ,select“Device Manager” - “Network
adapters”, and right click the network adapter you want to disable and click
“Disable”
3. Click the “Yes” button on the dialogue box to disable the network adapter.
1.5 Product Maintenance
1. Please keep the product away from water and humid environment to guarantee
its normal performance
2. Protect it against hazardous substances (such as acids, alkalis etc).
3. Please don’t directly expose the adapter to the sunlight or excessive heat.
4. Please contact Kraun tech support if any problems occur.
8 www.kraun.it
Manual Manual
www.kraun.it 9
Chapter 2. Installation Guide
This chapter will guide you through the process of installing the network adapter
software package, with the included software CD. The package integrates driver
and conguration software. Thus, when you are installing the driver, the congura-
tion software will be installed automatically as well.
The software installation steps and operating guide in this user guide are explained
under Windows XP, Installation steps for other operating systems are similar.
2.1 Hardware Installation
2.1.1 Install the USB network adapter
Please insert the Wireless USB Adapter into the USB port of your computer.
2.2. When The “Found New Hardware Wizard” system dialogue pops up, we rec-
ommend that you select” Cancel” and use the included Setup Wizard software
CD for fast installation.
2.3 Put the included software CD into the CD drive of your computer ,and the
driver should run automatically , a Welcome screen should pop up, just click
the “RUN” button.( Double click “Kraun.exe”in the software CD and manually
install when it doesn’t auto-run).
USB
10 www.kraun.it
Manual Manual
www.kraun.it 11
2.4 Select “I accept the terms of the license agreement” and click “Next”.
2.5 Two set up types are provided: one is “Install driver only” ,the other is “Install
driver and Kraun WLAN Cong Tool”.
NOTE: you may select the rst method when you are accustomed to use the
WINDOWS built-in wireless conguration program.However, this program
doesn’t support AP mode, WPS, and the WPS button on the wireless adapt-
er. To use these advanced features, the second method is recommended.
2.6. Click “Install” to begin the driver installation.
2.7 Click “Finish” to complete the installation.
12 www.kraun.it
Manual Manual
www.kraun.it 13
Chapter 3. How to use the Windows
Built-in Wireless Conguration
This chapter explains to users who don’t install Kraun conguration program how
to use Windows Built-in Wireless Conguration to connect to the wireless network .
Use of the Windows Built-in Wireless Conguration requires enabling Wireless Zero
Conguration service(the default is enabled).
3.1 Wireless Network Connection under Windows
1. Click the wireless connection in the lower right corner of the computer’s desktop
to view the available wireless networks. Select the wireless network you wish to
connect and click “Connect” or double click the wireless network to connect. If you
don’t nd the specied one, please click the refresh icon in the upper right corner
to update the list.
2. If the wireless network you are connecting is encrypted, you’ll be prompted to
enter the key. Click “Ok” after you enter the correct key.
3. It shows “Connected” after successfully connected. You can disconnect it, view its
status or modify the wireless network properties by right click the wireless network
14 www.kraun.it
Manual Manual
www.kraun.it 15
Chapter 4. Kraun Wireless Utility
When you are installing the driver, select “Install driver and Kraun WLAN Cong
Tool” and the adapter driver and client utility will be installed. All functions of this
adapter can be congured via Kraun’s utility interface (in the following text it is ab-
breviated as UI).
Select “Start”—“All Programs” —“Kraun Wireless”— Kraun Wireless Utility”, or click
the “Kraun Wireless Utility” shortcut on your PC’s desktop to start the UI.
4.1 Station mode (Client Mode)
Station mode (Client Mode) Overview
It is a common solution to use the wireless network adapter as a client to receive
signals.
Main interface for station mode
The function buttons on the top(From L to R )are respectively Site Survey, Link In-
formation, Prole, Advanced, About, Help, and MiniSize. While the left column dis-
plays Turn On/O RF, Security /No security, and Signal status.
4.1.1 Site Survey
The “Site Survey” screen displays currently scanned wireless signals and you can
click one to connect the signal. Select one and you may view the AP’s MAC ad-
dress, wireless mode (A/B/G/N), authentication type, and encryption type, or WPS
authentication and signal strength.
Before you connect to a wireless network, please click the “Rescan” button to up-
date the wireless network list and select the one you wish to connect, then click the
“Connect” icon.
For the networks that are not encrypted, you can directly click “Connect”. However,
for the encrypted wireless networks,a “Prole” dialog will pop up and you must se-
lect the corresponding authentication type and encryption type,and then click the
“Next” button to input the correct key.Please note that this type of connection will
not create a prole ,thus next time connect to this network you still need to select
it manually.
16 www.kraun.it
Manual Manual
www.kraun.it 17
The detailed explanations about the authentication and encryption are as follows:
WEP: Supports 10/26-bit Hex characters and 5/13-bit ASCII.
WPA-PSK: Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA2-PSK: Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA-PSK/WPA2-PSK: Supports 8-63-bit ASCII and 8-64 -bit hex characters.
NOTE:
The Hex characters consist of numbers 0~9 and letters a-f.
ASCII characters consist of any Arabic digitals/letters and characters.
4.1.2 Link Information
After successfully connected to one wireless network, you can view its detailed in-
formation by clicking the “Link Information” on the main interface.
1. “Link Status” screen displays the detailed information of the connected AP in-
cluding its SSID,MAC address, authentication type, encryption type, network type
and channel.
18 www.kraun.it
Manual Manual
www.kraun.it 19
2. “Throughput” screen displays the signal strength of each of the wireless adapt-
er’s antennas and the link quality.
3.”Statistics” screen is used to count the total Rx and Tx data packets, including
transmitted,retransmitted and fail to receive ACK after all retries.You can click the
“Reset Counter” button to clear the count.
4.1.3 Prole
Except the above common connection type, you can also connect to the wireless
network by adding a prole on the “Prole“screen.The Prole screen is used to save
the wireless network parameters. When the adapter is successfully connected to a
network, the prole name of this network will automatically be added here, which
helps the adapter to quickly connect to the wireless network next time. However,
there’s one exception that when you have set the hidden SSID,namely the SSID can
not be scanned,then you must manually connect by adding the prole name.The
main interface is as shown below.
Add: create a new prole
Delete: delete the existing prole
Edit: modify the existing prole
Add WPS Prole: WPS setting requires that the connecting wireless device
support WPS function. WPS helps you to fulll wireless encryption fast as well as
secure your wireless network. For detailed setting steps, refer to appendix2.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Adaptador de Kraun
