Kramer VM-80VN Manual de usuario

VM-80VN Quick Start

P/N:

2900- 301263QS

Rev:

Scan for full manual

VM-80VN Quick Start Guide

This guide helps you install and use your VM-80VN for the first time.

Go to www.kramerav.com/downloads/VM-80VN to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-80VN 1:8 Video Distributor

4 Rubber feet

1 Power supply (12V DC)

1 Quick start guide

Step 2: Get to know your VM-80VN

This section defines the VM-80VN.

Feature

Function

POWER LED

Illuminates when the device is powered on

CH2 ADJ HF Trimmer

Adjusts the CH2 cable compensation equalization level

CH2 ADJ Level Trimmer

Adjusts the CH2 video gain level

CH1 ADJ HF Trimmer

Adjusts the CH1 cable compensation equalization level

CH1 ADJ Level Trimmer

Adjusts the CH1 video gain level

CH 1 IN BNC Connector

Connects to the CH1 video source

CH 1 IN 75ΩPushbutton

Press in for CH1 75Ω termination, release for no termination

1:8 Pushbutton

Press in for 1:8 operation, release for 1:4 operation

CH 2 IN BNC Connector

Connects to the CH2 video source

CH 2 IN 75 ΩPushbutton

Press in for CH2 75Ω termination, release for no termination

CH 1 OUT BNC Connector

Connects to the CH1 video acceptor(s) (from 1 to 4)

CH 2 OUT BNC Connector

Connects to the CH2 video acceptor(s) (from 1 to 4)

12V DC Connector

Connector for attaching the 12V DC power supply

Step 3: Mount VM-80VN

Install VM-80VN using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Mount the unit in a rack using the recommended rack adapter (see www.kramerav.com/product/VM-80VN).

•Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-80VN.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-80VN.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the 12V DC power adapter to VM-80VN and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate VM-80VN

For 1:8 operation, press the 1:8 button

Using a small screwdriver, adjust the HF (EQ) or Level

(Gain) potentiometers per channel

For looping, press the 75Ω button

Otros manuales para VM-80VN

Tabla de contenidos

Otros manuales de Convertidor de medios de Kramer

Kramer

Kramer DigiTOOLS 7408 Manual de usuario

Kramer

Kramer VP-424 Manual de usuario

Kramer

Kramer DigiTOOLS VM-2HDCP Manual de usuario

Kramer

Kramer KDS-EN6 Manual de usuario

Kramer

Kramer FC-69 Manual de usuario

Kramer

Kramer VM-1110xl Manual de usuario

Kramer

Kramer VM-80VN Manual de usuario

Kramer

Kramer VP-740 ProScale Manual de usuario

Kramer

Kramer VP-425 Manual de usuario

Kramer

Kramer VM-28H Manual de usuario

Kramer

Kramer VP-426 Manual de usuario

Kramer

Kramer VM-4HDx1 Manual de usuario

Kramer

Kramer VM-4H Manual de usuario

Kramer

Kramer VM-4DH Manual de usuario

Kramer

Kramer VW-16 Manual de usuario

Kramer

Kramer VM-4Hxl Manual de usuario

Kramer

Kramer FC-340 Manual de usuario

Kramer

Kramer FC-31 Manual de usuario

Kramer

Kramer VCO-1 Manual de usuario

Kramer

Kramer VP-460 Manual de usuario

Kramer

Kramer VM-2DP Manual de usuario

Kramer

Kramer WP-DEC7 Manual de usuario

Kramer

Kramer VP-417 Manual de usuario

Kramer

Kramer KDS-SW3-EN7 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario