Kramer FC-46H2 Manual de usuario

FC-46H2 Quick Start

P/N:

2900- 300873QS

Rev:

Scan for full manual

FC-46H2 Quick Start Guide

This guide helps you install and use your FC-46H2 for the first time.

Go to www.kramerav.com/downloads/FC-46H2 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

FC-46H2 4K HDMI Audio De-Embedder

4 Rubber feet

1 Bracket set

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your FC-46H2

# Feature Function

PROG Mini USB Port

Connect to a PC to perform firmware upgrades (via K-Upload) and work with the

EDID Designer.

K-Upload and EDID Designer can be downloaded from our Web site at:

www.kramerav.com/downloads/FC-46H2).

To use the mini USB port, you need to download the Kramer USB driver from our

Web site at: www.kramerav.com/support/product_downloads.asp and install it.

SETUP 4-way DIP-switch

Set the device behavior.

All the DIP-switches are set to off (up) by default.

Feature

DIP-switch Settings

EDID Mode

On (down) — EDID locked.

Off (up) — EDID pass-through mode.

When EDID is locked, the audio parameters are set

as defined by DIP-switch 2. In pass-through mode,

the DIP-switch 2 setup is ignored.

2 Audio Support On (down) — Limits the audio to 2-channel LPCM.

Off (up) — Passes the audio parameters.

This setup is enabled only after DIP-switch 1 is set

to On (down; EDID locked).

3/4

Analog Audio

Amplification

Off (up)

On (down)

Off (up)

On (down)

Off (up)

On (down)

Amplification Level

0dB

6dB

12dB

18dB

AUDIO SOURCE

Selector Button

Press to route the audio source from HDMI IN or from HDMI OUT (ARC) to the

audio outputs.

IN LED

Lights green when HDMI IN is selected.

OUT LED

Lights green when HDMI OUT is selected (ARC).

AUDIO OUT

LEDs

DIGITAL

Lights green when a de-embedded audio signal is present on the S/PDIF output.

ANALOG

Lights green when a de-embedded audio signal is present on the ANALOG

audio output.

ON LED

Lights green when powered.

HDMI™ IN Connector

Connect to an HDMI source.

HDMI™ OUT Connector

Connect to an HDMI acceptor.

# Feature Function

8 AUDIO OUT

Connectors

ANALOG 5-pin

Terminal Block

Connect to an analog audio acceptor.

S/PDIF RCA

Connect to a digital audio acceptor.

MUTE 2-pin Terminal Block Connector

Momentarily connect the MUTE pin to GND to mute the analog audio output.

5V DC Power Connector

Connect to the Kramer power adapter.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 3: Install FC-46H2

Install FC-46H2 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface.

For more information go to www.kramerav.com/downloads/FC-46H2.

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/FC-46H2).

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your FC-46H2. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to FC-46H2.

Contact Closure Switches:

Mute the analog output by momentarily connecting the MUTE

pin to the GND.

Step 5: Connect the power

Connect the 5V DC power supply to FC-46H2 and plug it into the mains electricity.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the Kramer Electronics power supply that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Otros manuales para FC-46H2

Tabla de contenidos

Otros manuales de Convertidor de medios de Kramer

Kramer

Kramer FC-332 Manual de usuario

Kramer

Kramer VP-423 Manual de usuario

Kramer

Kramer VP-434 Manual de usuario

Kramer

Kramer KDS-EN6 Manual de usuario

Kramer

Kramer Tools 482xl Manual de usuario

Kramer

Kramer VM-100CB Manual de usuario

Kramer

Kramer VP-2K Manual de usuario

Kramer

Kramer KDS-USB2 Kit Manual de usuario

Kramer

Kramer FC-7402 Manual de usuario

Kramer

Kramer VP-425 Manual de usuario

Kramer

Kramer VP-470 Manual de usuario

Kramer

Kramer VS-411UHD Manual de usuario

Kramer

Kramer KDS-SW3-EN7 Manual de usuario

Kramer

Kramer VM-4HC Manual de usuario

Kramer

Kramer VM-24H Manual de usuario

Kramer

Kramer FC-102Net Manual de usuario

Kramer

Kramer VP-439 Manual de usuario

Kramer

Kramer VP-426 Manual de usuario

Kramer

Kramer FC-113 Manual de usuario

Kramer

Kramer VP-428H2 Manual de usuario

Kramer

Kramer FC-15 Manual de usuario

Kramer

Kramer VP-773AMP Manual de usuario

Kramer

Kramer FC-49 Manual de usuario

Kramer

Kramer PT-101H4 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario