Korg Volca Drum Manual de uso y cuidado

Tabla de contenidos

Otros manuales de Sintetizador de Korg

Korg

Korg MONOLOGUE Manual de usuario

Korg

Korg DSS-1 Manual de usuario

Korg

Korg TRITON taktile Manual de usuario

Korg

Korg monotribe Manual de uso y cuidado

Korg

Korg Preset Synthesizer Manual de usuario

Korg

Korg X5D Manual de usuario

Korg

Korg PA Series Guía de inicio rápido

Korg

Korg Mono/Poly Manual de usuario

Korg

Korg DS-8 Manual de usuario

Korg

Korg MiniKorg-700S Manual de usuario

Korg

Korg M-500 Manual de usuario

Korg

Korg MS-10 Manual de usuario

Korg

Korg Volca Bass Manual de usuario

Korg

Korg PA800 Manual de usuario

Korg

Korg Poly-800 Manual de usuario

Korg

Korg MONOPOLY POLYSIX MS-20 Manual de usuario

Korg

Korg Elec Tribe EA-1 Manual de usuario

Korg

Korg PA 900 Musikant Manual de usuario

Korg

Korg Synthesizer/Vocoder microKORG Manual de usuario

Korg

Korg MS2000BR Instrucciones de instalación y funcionamiento

Korg

Korg VOLCA DRUM Manual de usuario

Korg

Korg Volca Nubass Manual de uso y cuidado

Korg

Korg opsix Manual de usuario

Korg

Korg KingKORG Manual de usuario

Manuales populares de Sintetizador de otras marcas

Kawai

Kawai MP7 Manual técnico

Joranalogue

Joranalogue Contour 1 Manual de usuario

Full Bucket Music

Full Bucket Music Mono/Fury Manual de usuario

Kawai

Kawai PH50 Manual de usuario

IK Multimedia

IK Multimedia UNO Synth PRO X Manual de usuario

Behringer

Behringer DEEPMIND 12 Manual de usuario

Roland

Roland Gaia SH-01 Manual de usuario

Roland

Roland GR-30 Manual de usuario

Gotharman

Gotharman Gotharman's anAmoNo-box Manual de usuario

Yamaha

Yamaha DX21 Manual de usuario

QuStream

QuStream HDFS-550 Manual de usuario

Modal Electronics

Modal Electronics ARGON8 Manual de usuario

Roland

Roland GS-500 Manual de usuario

Octave

Octave Cat SRM Manual de usuario

Dreadbox

Dreadbox Murmux Initiate Manual de usuario

neutral labs

neutral labs ELMYRA 2 Manual de usuario

Waldorf

Waldorf KYRA Manual de usuario

Tubbutec

Tubbutec Juno-66 Manual de usuario

volca drum System Firmware Update Instructions

1

System Firmware Update Instructions

Do not playback the system update file on any speaker or headphone system as this could lead to

damage to equipment and/or hearing loss. Korg or any of its affiliates will not accept responsibility for

any damages, personal loss or injury that may result from playback of the file.

What you will need

You will need the following to perform your update.

An audio player or personal computer capable of audio playback

A stereo mini-jack audio cable

AC adapter KA-350 or six AA batteries

Make sure the batteries are brand new if using alkaline or fully charged if using NiMH batteries.

volca drum will not enter update mode if the batteries are depleted.

Preparations

1. Unzip the file “volca_drum_updater_0114.zip”.

If using an audio player, transfer the file volca_drum_sys_0114.wav from your computer to your

audio player.

Do not playback the system update file on any speaker or headphone system as this could lead

to damage to equipment and/or hearing loss.

2. Check the current version

Turn the power on while pressing the PLAY button. The LCD display will indicate the current version

of the main and panel systems in the following format:

“MAI 0111” : main system version 1.11

“PNL 0009” : panel system version 0.09

Pressing the PLAY button will continue the startup process normally.

volca drum System Firmware Update Instructions

2

3. Connect the audio output of your playback device to the SYNC IN connector on your volca drum.

Perform the update

1. Turn the power on while pressing the FUNC and REC buttons.

“SYS uPdt” will be displayed on the LCD screen to indicate that volca drum is in update mode.

2. Start the playback of volca_drum_sys_0114.wav to begin updating.

Make sure the volume of the playback device has been turned up.

STEP LEDs 1-8 will indicate the update the transfer progress, LEDs 9-16 indicate the FLASH

programming and verification progress.

Make sure the update file is played from the beginning.

When using a computer, any other system sounds (e.g. email notification) will cause the update

to fail. Make sure all other applications are shut down and do not operate you computer during

the update.

volca drum System Firmware Update Instructions

3

The update will take approximately one minute and a half. Do not turn your volca drum off or

stop playback while update is in progress.

If the update fails, all the STEP LEDs will start blinking. If this happens, observe “Tips”at the

end of this document and repeat the update from step 1.

3. When the update has successfully completed, “UPD End” will be displayed on the LCD display.

Now, turn the power off.

4. Go back to step 2 of “Preparations”and check that your volca drum has been updated by verifying

the current system version.

Tips

Update may fail with some audio players, computers or software. If this is the case, please try with a

different device.

If you are having trouble with the update, please check the following:

Make sure the volume of the playback device has been turned up.

Please note that some devices which have very high output levels may fail because of it. If this

is the case please try turning the volume down and start the update process again.

Make sure all functions that affect the playback sound, such as cross-fade and EQ, are

disabled.

Make sure the update file is played from the beginning.

Check the connection from your playback device to your volca drum.

When using a computer, any other system sounds (e.g. email notification) will cause the update

to fail. Make sure all other applications are shut down and do not operate you computer during

the update.