Korg Digital Mixer ZERO8 Manual técnico

Figure 2: Buttons to press for system update

BANK C

FireWire LED

EXT 1 CUE

Update Instruction for Mac

Turn your ZERO8 on.

Check the current ZERO8 version

appearing on the startup screen

(Figure 1).

Turn your ZERO8 off.

The ZERO8 system update requires a FireWire cable and computer with the

update downloaded. Your system must be Mac OS X 10.3.9 or higher.

At present, the updater is not compatible with OS X 10.4.10. It has been

successfully tested for use in OS x 10.4.9 and OS X 10.5

1.

2.

3.

Checking the current version

ZERO8 System Updater Ver 1.5

Figure 1: ZERO8 startup screen

With your ZERO8 turned off, connect

the FireWire cable to your Macintosh

machine and ZERO8.

While pressing and holding the EXT1

CUE and BANK C buttons shown in

Figure 2, power on your ZERO8.

Verify that the SYSTEM UPDATE

WAIT message flashes on the LCD.

Do not proceed until the FIREWIRE

LED shown in Figure 2 lights up.

1.

2.

3.

4.

ZERO8 system update (Preparing the ZERO8)

Note:

Update Instruction for Mac

Extract the downloaded file. Double-

click on KORG ZERO8 System xxx

Updater (xxx for the version number)

in the System folder to start up the

application.

Press [Detect] to scan and find

your ZERO8. When your ZERO8 is

detected correctly, the screen shown

in Figure 3 appears.

Click on [Update] in the main window

to start the update.

You should now see a "Writing...

(??%)" message indicating the

ZERO8 is being updated. The pro-

cess lasts approximately 5 minutes.

The LCD will stop flashing now and

remain lit.

Power your ZERO8 off and discon-

nect the FireWire cable.

Turn your ZERO8 on and verify the

version as displayed on the startup

screen.

Note:

During this process, a dialog

box stating, "Sorry, Please

Retry" may appear. If this

happens, click [OK] to close

the dialog box, and then press

[Update] again to restart the

update.

1.

2.

3.

4.

5.

6.

7.

ZERO8 system update (Running the Updater)

ZERO8 System Updater Ver 1.5

Figure 3: Start-up

Figure 4: Your ZERO8 detected correctly

Figure 5: Update started

Figure 6: While updating

Figure 7: Update successfully completed

Do not power your ZERO8 off

at any time during this process

Otros manuales para Digital Mixer ZERO8

3

Tabla de contenidos

Otros manuales de Sintetizador de Korg

Manuales populares de Sintetizador de otras marcas

Kawai

Kawai MP7 Manual técnico

Joranalogue

Joranalogue Contour 1 Manual de usuario

Full Bucket Music

Full Bucket Music Mono/Fury Manual de usuario

Kawai

Kawai PH50 Manual de usuario

IK Multimedia

IK Multimedia UNO Synth PRO X Manual de usuario

Behringer

Behringer DEEPMIND 12 Manual de usuario

Roland

Roland Gaia SH-01 Manual de usuario

Roland

Roland GR-30 Manual de usuario

Gotharman

Gotharman Gotharman's anAmoNo-box Manual de usuario

Yamaha

Yamaha DX21 Manual de usuario

QuStream

QuStream HDFS-550 Manual de usuario

Modal Electronics

Modal Electronics ARGON8 Manual de usuario

Roland

Roland GS-500 Manual de usuario

Octave

Octave Cat SRM Manual de usuario

Dreadbox

Dreadbox Murmux Initiate Manual de usuario

neutral labs

neutral labs ELMYRA 2 Manual de usuario

Waldorf

Waldorf KYRA Manual de usuario

Tubbutec

Tubbutec Juno-66 Manual de usuario