Kontron CPCI-MXS64 Manual del producto

cPCI-MXS64

6U CompactPCI®64-bit System Processor

Technical Reference Manual

Version 1.4, February 2003

Note: The latest releases of the Technical Reference Manuals are available at:

ftp://ftp.kontron.ca/Support/Product_Manuals/

Ref. : M6002_TECH

www.kontron.com

FCC Compliance Statement

Warning

Changes or modifications to this unit not expressly approved by the party responsible for

the compliance could void the user’s authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be required to

correct the interference at his or her own expense.

European Statement

Warning

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Safety Standard

UL Recognized Component, File # E186339 vol. 1 section 2

Care and handling precautions for Lithium batteries

•Do not short circuit

•Do not heat or incinerate

•Do not charge

•Do not deform or disassemble

•Do not apply solder directly

•Do not mix different types or partially used batteries together

•Always observe proper polarities

FOREWORD

The information in this document is provided for reference purposes only. Kontron does

not assume any liability for the application of information or the use of products described

herein.

This document may contain information or refer to products protected by the copyrights or

patents of others and does not convey any license under the patent rights of Kontron, nor

the rights of others.

Printed in Canada.

DOCUMENTATION SURVEY

cPCI-MXS64 – Technical Reference Manual

Your comments are valuable for us and will contribute to improve the quality of this product by complementing

and returning this form.

1. Overall rating of the Technical Reference Manual: ❑Excellent ❑Satisfactory ❑Fair ❑Poor

2. Was the information you were seeking easy to find? ❑Yes ❑No

If no, can you comment? __________________________________________________________________

3. What section of this manual do you refer to the most? __________________________________

4. How can you rate this manual?

In terms of clarity of information: ❑Excellent ❑Satisfactory ❑Fair ❑Poor

Comments: _____________________________________________________________________________

_______________________________________________________________________________________

In terms of complexity: ❑Too technical ❑Just OK ❑Not technical enough

Comments: _____________________________________________________________________________

_______________________________________________________________________________________

In terms of classification of information: ❑Excellent ❑Satisfactory ❑Fair ❑Poor

Comments: _____________________________________________________________________________

_______________________________________________________________________________________

5. Is there any missing information? ❑Yes ❑No

If yes, what information is missing?__________________________________________________________

_______________________________________________________________________________________

6. Is some information not properly or clearly explained? ❑Yes ❑No

If yes, can you comment?__________________________________________________________________

_______________________________________________________________________________________

7. Additional comments (any changes or modifications to this manual): _______________________________

_______________________________________________________________________________________

______________________________________________________________________________

Please send your comments to:

Kontron Inc

Technical Writing dept.

616 Curé Boivin, Boisbriand

(Québec) CANADA J7G 2A7

Name ________________________________

Company _____________________________

Address ______________________________

_____________________________________

Optional

ADDITIONAL COMMENTS

READ ME FIRST

Your computer board has a standard non-rechargeable lithium battery. To preserve the

battery lifetime, the battery enable jumper is removed when you receive the board. If

you do not have any jumper cap, we suggest you to use the Watchdog Timer jumper cap.

EXERCISE CAUTION WHILE REPLACING LITHIUM BATTERY

 WARNING

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of

used batteries according to the manufacturer's instructions.

 ATTENTION

Il y a danger d’explosion s’il y a remplacement incorrect de la batterie.

Remplacer uniquement avec une batterie du même type ou d’un type

équivalent recommandé par le constructeur. Mettre au rebut les batteries

usagées conformément aux instructions du fabriquant.

ACHTUNG

Explosionsgefahr bei falschem Batteriewechsel.

Verwenden Sie nur die empfohlenen Batterietypen des Herstellers.

Entsorgen Sie die verbrauchten Batterien laut Gebrauchsanweisung des

Herstellers.



ATENCION

Hay un peligro de explosion si la pila no ha si bien remplazada. Remplace

la pila con el mismo tipo o con aquellas recomendadas por el fabricante.

Para desacerce de las pilas usadas, siga las instructiones del fabricante.

 IMPORTANT

J1 and J2 are de-facto industry standard as defined by PICMG

J3, J4 and J5 are user-defined connectors and will vary from various

manufacturers. Contact our Technical Support to verify pinout

compatibility with other chassis backplane vendors.

 POWERING-UP THE SYSTEM

If you should encounter a problem, verify the following items:

Make sure that all connectors are properly connected.

Verify your boot diskette.

If the system still does not start up properly, you should try booting your

system with only the power cord and video monitor connected to the board

this is the minimum required to see if the board is working).

If you still are not able to start up your system, please refer to the

emergency Procedure in the Appendix Section.

If you still are not able to get your board up and running, contact our

technical Support department for assistance.

 PREVENTING VIRUSES

Kontron Inc. takes every precaution against computer viruses. To safeguard

against computer viruses in general, do not freely lend your diskettes

and regularly perform virus scans on all your computer systems.

 ADAPTER CABLES

While adapter cables are provided from various sources, the pinout is often

different. The direct crimp design offered by Kontron allows the simplest

cable assembly. All cables are available from Kontron Sales Department.

UNPACKING AND SAFETY PRECAUTIONS

Static Electricity

Since static electricity can damage the board, the following precautions should be taken:

1. Keep the board in its antistatic package, until you are ready to install it.

2. Touch a grounded surface or wear a grounding wrist strap before removing the board

from its package; this will discharge any static electricity that may have built up in

your body.

3. Handle the board by the edges.

Storage Environment

Electronic boards are sensitive devices. Do not handle or store devices near strong

electrostatic, electromagnetic, magnetic or radioactive fields.

Power Supply

Before any installation or setup, ensure that the board is unplugged from power sources or

subsystems.

Unpacking

Follow these recommendations while unpacking:

1. After opening the box, save it and the packing material for possible future shipment.

2. Remove the board from its antistatic wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage, or items are missing, notify

Kontron immediately.

When unpacking you will find:

1. 6U CompactPCI®64-bit System Processor board

2. One Quick Reference sheet

3. One CDROM containing drivers.

TABLE OF CONTENTS

1. PRODUCT DESCRIPTION...........................................................................1-1

1.1. Product Overview..............................................................................................1-1

1.2. Product Specifications.......................................................................................1-2

1.3. Hot Swap capability...........................................................................................1-4

1.4. Interfacing with the Environment.......................................................................1-6

1.4.1 cPCI....................................................................................................................1-6

1.4.2 Mezzanine...........................................................................................................1-6

1.5. Compatibility with other KONTRON Products...................................................1-7

1.6. Mezzanine Card Concept..................................................................................1-8

1.6.1 Kontron’s Mezzanine Concept.............................................................................1-9

1.6.2 PMC Concept......................................................................................................1-9

1.6.3 CompactFlash Feature........................................................................................1-9

2. ONBOARD FEATURES ...............................................................................2-1

2.1. CompactFlash Interface....................................................................................2-1

2.1.1 Setups.................................................................................................................2-1

2.2. Enhanced IDE Interfaces ..................................................................................2-2

2.3. Ethernet Interfaces............................................................................................2-3

2.3.1 Front Plate Configuration.....................................................................................2-3

2.3.2 cPCI I/O Configuration.........................................................................................2-3

2.4. Floppy Disk Interface.........................................................................................2-4

2.5. PS/2 Keyboard / PS/2 Mouse Interface.............................................................2-4

2.6. Parallel Port.......................................................................................................2-5

2.6.1 Standard Mode....................................................................................................2-6

2.6.2 EPP Mode...........................................................................................................2-6

2.6.3 ECP Mode...........................................................................................................2-6

2.7. Power Management..........................................................................................2-7

2.8. SCSI Interface...................................................................................................2-7

2.9. Serial Ports........................................................................................................2-8

2.9.1 SERIAL PORT 1..................................................................................................2-8

2.9.1.1. Remote Reset ...................................................................................... 2-8

2.9.1.2. Front Plate Configuration...................................................................... 2-9

2.9.2 Serial Port 2 ........................................................................................................2-9

2.9.3 Serial Port 3 ......................................................................................................2-10

2.9.3.1. Infrared Mode......................................................................................2-11

2.9.3.2. RS-232 Protocol..................................................................................2-11

2.9.3.3. RS-422 Protocol..................................................................................2-11

2.9.3.4. RS-485 Protocol..................................................................................2-11

2.9.4 Serial Port 4 ......................................................................................................2-12

2.10.Thermal Management.....................................................................................2-12

2.11.USB Interfaces................................................................................................2-13

2.12.Video Interface................................................................................................2-14

2.12.1 Supported Resolutions......................................................................................2-14

2.12.2 Major Features Description................................................................................2-15

3. INSTALLING THE BOARD..........................................................................3-1

3.1. Setting Jumpers ................................................................................................3-1

Tabla de contenidos

Otros manuales de Hardware de computadora de Kontron

Kontron

Kontron CI5TTV Series Manual de usuario

Kontron

Kontron Kiss 2U Manual de usuario

Kontron

Kontron AdvancedTCA AT8901M Manual de usuario

Kontron

Kontron AM4024 Manual de usuario

Kontron

Kontron CP6003-SA Manual de usuario

Kontron

Kontron Kiss-Stor 0/5 Manual de usuario

Kontron

Kontron nanoETXexpress-SP Manual de usuario

Kontron

Kontron PC/104-PCMCIA-1 Manual de usuario

Kontron

Kontron xBP-6E2P3 Manual de usuario

Kontron

Kontron AT8901 Manual de usuario

Kontron

Kontron CP6016 Manual de usuario

Kontron

Kontron EBP-11A4B6 Manual de usuario

Kontron

Kontron ETX -CN8 Manual de usuario

Kontron

Kontron nanoETXexpress-SP Manual de usuario

Kontron

Kontron KTQ67/Flex Manual de usuario

Kontron

Kontron KBox E-200 Series Manual de usuario

Kontron

Kontron COM Express Extension Manual de usuario

Kontron

Kontron COMh-caRP Manual de usuario

Kontron

Kontron ETXexpress-WPM Manual de usuario

Kontron

Kontron pITX-iMX8M Manual de usuario

Kontron

Kontron COM-HPC Manual de usuario

Kontron

Kontron CP6930 Manual de usuario

Kontron

Kontron AT8060 Manual de usuario

Kontron

Kontron coolMonster/PM Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario

Advantech

Advantech ASMB-935 Series Manual de usuario

Jupiter

Jupiter RAM PACK Manual de usuario

Kontron cPCI-MXS64 Manual del producto

Manuales populares de Hardware de computadora de otras marcas