Konica Minolta SCANNER RX-1 - V2.1.0 Manual de usuario

Film Scanner RX1 User Interface Manual

Ver2.1.0

First Edition

Konica Corporation

KONICA FILM SCANNER RX-1

RX1 User Interface - 2-

Film Scanner RX1 User Interface Manual

Introduction

This is a user interface program for Twain data sources which support Windows 95/98/NT4.0.

You can launch the program in the following two ways.

(1) Select the source data from the File/Acquire menu of an application supporting Twain,

such as Adobe Photoshop or PhotoDeluxe.

(2) Double-click the icon which activates a Twain data source as an independent

application.

1. Scan Setup tab

This tab appears first after starting the program.

The tab contains the conditions applicable to the particular image you are scanning.

KONICA FILM SCANNER RX-1

RX1 User Interface - 3-

Modesetting

Film type

The RX1 can acquire images from the following three types of film.

•Color negative film.

•Black-and-white negative film.

•Positive film.

Set this to fit the type of film you are scanning.

Focusing

You can focus the RX1 by the following three methods.

•Normal.

•Search.

•Lock.

Resolution

You have a choice of resolutions.

However, the choice differs according to the type of film.

Non-APS film:

•512 x 768.

•1024 x 1536.

•2048 x 3072.

APS film:

•512 x 912.

•1024 x 1824.

Carrier type

You can use the following three carriers.

•Sleeve carrier.

•APS carrier.

•Slide carrier.

When changing the carrier, close the Scan Setup tab or user interface first. The carrier

determines the film type and focusing you can use. The combinations are as follows.

Carrier Film Type Focusing

Color negative film NormalSleeve Black-and-white negative film Normal

NormalPositive film Lock

Slide Black-and-white negative film Normal

Positive film Normal

Lock

Color negative film Normal

APS Black-and-white negative film Normal

Positive film Normal

Lock

KONICA FILM SCANNER RX-1

RX1 User Interface - 4-

Cropping

Cropping is changing the number of pixels the RX1 sends. The film type determines the

crop sizes you can set. The combinations are as follows

Film Type Cropping Prescan Standerd Fine Super Fine

Normal 128 x 192 512 x 768 1024 x 1536 2048 x 3072135 Panorama 128 x 192 272 x 768 544 x 1536 1088 x 3072

135 slide Normal 128 x 192 512 x 768 1024 x 1536 2048 x 3072

Panorama 68 x 176 272 x 704 544 x 1408 1088 x 2816

APS slide 80 x 144 320 x 576 640 x 1152 1280 x 2304

Slide 116 x 176 464 x 704 928 x 1408 1856 x 2816

APS Normal 108 x 192 512 x 912 1024 x 1824 ---------------

Panorama 68 x 192 320 x 912 640 x 1824 ---------------

C-size 108 x 144 512 x 688 1024 x 1376 ---------------

Frame edge detection

In automatic mode, the RX1 detects frames automatically. During a prescan of high

density positive film, however, a problem can occur in some cases with the RX1

detecting frames incorrectly and displaying a number of frames too few for those actually

in the film.

In fixed mode, the RX1 determines the beginning-of-frame position based on a fixed

value using the perforation width as a clue.

Sharpness

You can set this in five steps..

Buttons

Prescan button

Clicking this button starts a prescan.

Because the cursor rests on this button when you open the Setup tab, pressing the

Enter key starts a prescan, too.

After the end of the prescan, the cursor moves onto the Rotate/Mirror tab. The number of

pixels acquired during a prescan is as follows.

135 :192 x 128 dots.

APS :228 x 128 dots.

Cancel button

Clicking the Cancel button stops a prescan in progress.

Because the cursor moves onto this button after the start of a prescan, pressing the

Enter key stops the prescan, too.

(Once the film starts moving, the Cancel key is locked and the prescan continues to the

last frame; after the prescan, the cursor moves back on the Setup tab.)

Help button

KONICA FILM SCANNER RX-1

RX1 User Interface - 5-

Displays a description of how to use the buttons in the current screen.

Eject Film button

Clicking the button discharges the film.

Close button

Clicking the button quits the current program.

Statusbar

Displays a description of the steps you need to perform next. During a prescan, a

progress bar appears, indicating the degree of progress.

KONICA FILM SCANNER RX-1

RX1 User Interface - 6-

2.Rotate/Mirror tab

The cursor moves onto this tab after a prescan.

The acquired images appear.

When the Sleeve or APS carrier is used, one screen displays a maximum of six images...3

frames x 2 rows.

To display the sixth and subsequent frames, scroll the images using the scroll bar.

When the Slide carrier is used, one screen displays one frame.

This tab lets you rotate, mirror, and refresh images or manually adjust the beginning-of-

frame position.

Imageselection

Before performing the operations mentioned above, select an image you wish to work on

by clicking it. You can select multiple frames simply by using this key in combination with

the Shift or CTRL key as you do in a Window.

KONICA FILM SCANNER RX-1

RX1 User Interface - 7-

Buttons

Rotate button

Clicking the Rotate button rotates the image in the selected frame through 90° clockwise.

Rotate All button

Clicking the Rotate All button rotates all images, selected or not, through 90° clockwise.

Mirror button

Clicking the Mirror button flips the image in the selected frame to give its mirror image.

Mirror All button

Clicking the Mirror All button flips all images, selected or not, to give their mirror

images.

However, because images are always flipped from their original positions, those already

flipped once are not flipped.

Refresh button

If the beginning-of-frame position is not accurate during a prescan, the image may have

unbalanced colors. Clicking the Refresh button after adjusting the position using the X/Y

offset recalculates the colors.

X/Yoffset

This lets you manually adjust the beginning-of-frame position if inaccurate during a

prescan.

The X offset slide bar appears under the selected frame. Clicking an arrow or anywhere

between an arrow and the slider or dragging the slider shifts the frame position

Horizontally.

(Note that when you rotate an image, it is rotated from the X offset slide bar image posi-

tion.)

The Y offset slide bar appears to the left of the scroll bar.Operating the Y offset slide bar

shifts all the frame positions simultaneously. The offset value or how much

they were shifted appears at the right extremity of the screen.

Framecount

Displays the total number of frames acquired during a prescan.

Scrollbar

Because the screen displays a maximum of six frames, use the scroll bar to display the

remaining frames when the frame count is more than 7. Operate the scroll bar as you do in

a Window.

KONICA FILM SCANNER RX-1

RX1 User Interface - 8-

Rightmousebuttonclicking

Selecting a frame and clicking the right mouse button on it display the dropdown menu

which offers the following functions.

•Rotate.

•Rotate All.

•Mirror.

•Mirror All.

•Refresh.

•Crop.

DXcode

Displays decoded DX code information.

The information includes the film type and vendor name, but only the vendor name

appears in some cases, depending on film.

With film not yet registered, the DX code appears as coded numbers.

Caution: If the RX1 cannot recognize a DX code due to incorrectly loaded film, etc., a

KONICA FILM SCANNER RX-1

RX1 User Interface - 9-

dialog box appears, with the following three buttons inside.

Retry : The film needs to be reloaded and a second prescan to be executed.

Cancel : Cancels the prescan (same as a retry in effect).

Ignore : Ignores the DX code and switches to the Rotate/Mirror tab.

When you are done with the operations on the Rotate/Mirror tab, click the on-screen tab

to move to the next tab.

KONICA FILM SCANNER RX-1

RX1 User Interface - 10 -

3. Enhance tab

This tab lets you adjust the colors of the image you are scanning.

Buttons

Color Adjustment button

Clicking the button displays the Color Adjustment dialog box.

When only one frame is selected, its exploded image appears in the dialog box.

The number of pixels displayed is as follows.

•When using the sleeve carrier :384 x 256 (landscape)/256 x 384 (portrait).

•When using the slide carrier :384 x 256 (landscape)/256 x 384 (portrait).

•When using the APS carrier :384 x 216 (landscape)/216 x 384 (portrait).

When multiple frames are selected, no images appear in the dialog box.

Reset Selected button

Clicking the button undoes the adjustment applied immediately before in the Color

Adjustment dialog box.

When clicked, the displayed button name changes to Restore Selected.

Otros manuales de Escáner de Konica Minolta

Konica Minolta

Konica Minolta BIZHUB C252 Manual de usuario

Konica Minolta

Konica Minolta bizhub PRESS C8000 Manual de usuario

Konica Minolta

Konica Minolta PS5000C MKII Manual de usuario

Konica Minolta

Konica Minolta PS 7000 Manual de usuario

Konica Minolta

Konica Minolta DiMAGE Scan Elite 5400 II Manual

Konica Minolta

Konica Minolta SU-502 Manual de usuario

Konica Minolta

Konica Minolta Fujitsu fi-6800 Manual de usuario

Konica Minolta

Konica Minolta PS5000C MKII Manual de usuario

Konica Minolta

Konica Minolta II Manual de usuario

Konica Minolta

Konica Minolta DiMAGE Scan Dual IV Manual de usuario

Konica Minolta

Konica Minolta SL1000 Digital Film Scanner Manual de usuario

Konica Minolta

Konica Minolta PW1-NS Manual de usuario

Konica Minolta

Konica Minolta IV Manual de usuario

Konica Minolta

Konica Minolta ScanDIVA Manual de usuario

Konica Minolta

Konica Minolta Q-SCAN Manual de usuario

Konica Minolta

Konica Minolta RX-II Manual de usuario

Konica Minolta

Konica Minolta MS 7000 Manual de usuario

Konica Minolta

Konica Minolta bizhub PRESS 1052 Manual de usuario

Konica Minolta

Konica Minolta bizhub 160 Manual de usuario

Konica Minolta

Konica Minolta SL1000 Digital Film Scanner Manual de usuario

Konica Minolta

Konica Minolta MS7000 MK II Manual de usuario

Konica Minolta

Konica Minolta Vivid 910 Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 600 Manual de usuario

Konica Minolta

Konica Minolta PS7000C MKII Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario