Konica Minolta bizhub c3110 Instrucciones de montaje
User's Guide: Advanced Functions
[Advanced Functions] Contents-1
Table of contents
1 Advanced Functions
2 Registering License Kits
2.1 License registration ........................................................................................................................ 2-2
2.2 Registering licenses ....................................................................................................................... 2-3
3 Associating with the ThinPrint System
3.1 ThinPrint function............................................................................................................................ 3-2
3.2 Operations required to use this function (for administrators).................................................... 3-3
4Index
1Advanced Functions
[Advanced Functions] 1-2
1
1 Advanced Functions
To use advanced functions on this machine, you need to install optional license kits.
The table below shows the correspondence between available advanced functions and options or license
kits to be purchased.
Tips
i-Option LK-106, i-Option LK-107, and i-Option LK-108 can only be used when an optional Hard Disk is
installed.
License kit Function Overview
i-Option LK-106 Bar code font Generates a bar code based on data sent to this ma-
chine from the ERP (Enterprise Resource Planning)
system, and prints it from this machine.
You can directly print data without using the printer
driver.
i-Option LK-107 Unicode font Prints text information (unicode) of multiple languages
sent to this machine from the ERP (Enterprise Re-
source Planning) system.
You can directly print data without using the printer
driver.
i-Option LK-108 OCR font OCR font can be used on this machine. OCR font is
standardized font that enables text to be appropriately
recognized when the OCR (Optical Character Recog-
nition) is used.
i-Option LK-111 ThinPrint function Configure settings to enable the ThinPrint function in
this machine.
ThinPrint is a function that realizes speedy printing by
performing data compression or broadband control
when a print job is sent from ThinPrint Engine (.print
Engine) to ThinPrint Client (.print Client). This machine
operates as ThinPrint Client (.print Client).
For details, refer to page 3-2.
2Registering License Kits
[Advanced Functions] 2-2
2.1 License registration 2
2 Registering License Kits
2.1 License registration
To use advanced functions on this machine, purchase a license kit that is available for each function, and
register license information on the License Management Server (LMS). You also need to register a license
code issued from LMS on this machine to enable the required advanced function on this machine.
The license registration flow is as follows.
Purchase a required license kit
The token certificate included in a license kit contains the token number and LMS Web site ad-
dress that are required to register licenses in LMS.
%Token number: Used to identify a contract that is set up to purchase a license for an advanced func-
tion.
Check the serial number and request code using this machine
The serial number and request code are required to register licenses in LMS.
%Serial number: Serial number of this machine.
%Request code: Used to identify this machine.
Access the LMS Web site from a computer and obtain the function code and license code
The Web site address of the License Management Server can be found in the token certificate
included in the license kit.
To obtain the function code and license code, enter the serial number, request code, and token
number in the Web site.
The function code and license code are required to enable the advanced functions on this ma-
chine.
%Function code: Used to identify each advanced function.
%License code: Used to enable each advanced function.
Enter the function code and license code on this machine to enable the advanced functions
Completed
2.2 Registering licenses 2
[Advanced Functions] 2-3
2.2 Registering licenses
1Purchase a required license kit.
%A token certificate included in a license kit is required to register a license on this machine using
LMS.
2On the Control Panel of this machine, select [UTILITY] - [Admin Settings] - [License Management] -
[Get Request Code].
3Write down the serial number and request code.
%If you select [Print], the serial number and request code can be printed.
4Open the Web browser through a computer connected to the Internet, and connect this machine to the
Web site of the License Management Server (LMS).
%The Web site address of the License Management Server can be found in the token certificate in-
cluded in the license kit.
5Enter the serial number and requests code, then proceed to the next step.
6Enter the token number, select the name of the product to be purchased, then proceed to the next step.
%The token number can be found in the token certificate included in the license kit.
[Advanced Functions] 2-4
2.2 Registering licenses 2
7Check the registered contents, and issue a license code.
You will receive the function code and license code. Write down them, or print out the target Web page.
%Do not use [Download]. In this machine, you cannot enable the advanced functions using a USB
memory device.
8On the Control Panel of this machine, select [UTILITY] - [Admin Settings] - [License Management] -
[Activation].
9Register the function code and license code that are issued from the LMS Web site.
%If necessary, you can register function and license codes using Web Connection. In the adminis-
trator mode, select [System] - [License Settings] - [Enabler], then register the function code and li-
cense code.
10 Select [Execute].
3Associating with the ThinPrint
System
[Advanced Functions] 3-2
3.1 ThinPrint function 3
3 Associating with the ThinPrint System
3.1 ThinPrint function
ThinPrint is a function that realizes speedy printing by performing data compression or broadband control
when a print job is sent from ThinPrint Engine (.print Engine) to ThinPrint Client (.print Client).
This machine operates as ThinPrint Client (.print Client).
Tips
An optional i-Option LK-111 is required to use the ThinPrint function.
Otros manuales para bizhub c3110
7
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Impresora de Konica Minolta
Konica Minolta
Konica Minolta BIZHUB PRO C5500 Manual
Konica Minolta
Konica Minolta magicolor 4750EN/4750DN Manual de usuario
Konica Minolta
Konica Minolta Bizhub 3320 Manual de usuario
Konica Minolta
Konica Minolta magicolor 1600W Manual de usuario
Konica Minolta
Konica Minolta Magicolor 5650EN Manual de usuario
Konica Minolta
Konica Minolta magicolor 2430 DL Manual de usuario
Konica Minolta
Konica Minolta magicolor 1690MF Manual de usuario
Konica Minolta
Konica Minolta magicolor 2430 DL Manual de usuario
Konica Minolta
Konica Minolta PagePro 1200W Manual de usuario
Konica Minolta
Konica Minolta PagePro 1350E Manual de usuario
Konica Minolta
Konica Minolta magicolor 1600W Instrucciones originales
Konica Minolta
Konica Minolta bizhub PRO 951 Manual de instalación
Konica Minolta
Konica Minolta bizhub C350 Manual de usuario
Konica Minolta
Konica Minolta Magicolor 2350 EN Manual de usuario
Konica Minolta
Konica Minolta magicolor 1650EN Instrucciones originales
Konica Minolta
Konica Minolta Magicolor 5440 dl Guía de configuración
Konica Minolta
Konica Minolta bizhub C220 Series Manual
Konica Minolta
Konica Minolta magicolor 1600W Manual de usuario
Konica Minolta
Konica Minolta Magicolor 2 CX Manual
Konica Minolta
Konica Minolta Magicolor 2300W Manual de usuario
