Konica Minolta BIZHUB 162 Manual de usuario

4034-7181-01

91264C117H016

INSTALLATION MANUAL

FK-505

Applied Machine: / /

for Product Code 4034/4035

Fax Kit

NOTE

•Before installing, be sure to unplug the power cord of the machine.

•Keep all packing materials out of the reach of children.

4034-7181-01E.fm 0 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 1 –

■Unpacking

1. Check that the following accessories are available in the box.

■If this option is set up together with EM-101/EM-102, IC-205, NC-502

and SU-502 as a system, carry out the installation procedures in the

following order.

NOTE

For the detailed installation procedures for each option, refer to the Installation

Manual provided for that particular option and make sure that the option is properly

set up according to the instructions given in that manual.

1. Fax Panel ...............................................................................................1

2. Speaker & Battery Assy .........................................................................1

3. Fax Board...............................................................................................1

4. NCU Board.............................................................................................1

5. Modular Cable* ......................................................................................1

6. Modular Jack* ........................................................................................1

7. CD (LSD)................................................................................................1

8. Panel sheets* .........................................................................................2

9. Labels................................................................................................1set

10. FAX-Flowchart* ......................................................................................1

11. Screws (3 × 6 mm)...............................................................................11

12. User’s Guides (FK-505/SU-502)*...........................................................2

13. Installation Manuals (FK-505/SU-502) ...................................................2

* Varies depending on the applicable marketing area

4398U001AA

4398U002AB 4398U003AB

4398U005AB

4442U015AA 4980U041AA 4398U006AA

4658U024AA 4980U018AA

4980U021AA

4398IXC016DA

EM-101/EM-102

NC-502 SU-502

IC-205

FK-505

4034-7181-01E.fm 1 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 2 –

■Installing the Fax Board (if the printer controller is not mounted)

1. Remove the Rear Cover. (nine screws)

4048U006AB

398IXE015DA

2. Using nippers, break the knockout ➀of the

Left Side Cover.

NOTE

If the NC-502 is to be mounted at the same

time, break both knockouts

➀

and

➁

➀

➁

4398U017AC

3. Change the position of the jumper (CJ1) on

the Copier Control Board (from 1, 2 to 3, 4).

398U008AB

4. Connect the Fax Board to the hookup

connector of the Copier Control Board.

Type Jumper Marketing area

1 2 3 4 5 6

STD(110V)UL

23 12 12 12 23 23

U.S.A., Canada, Taiwan, U.A.E., South America

STD(220V) Singapore, Malaysia, Hong Kong, Russia, Iran,

Bahrain, Qatar, Poland, Croatia, Slovenia, Baltic,

Romania, Ukraine, Kuwait, New Zealand,

Philippine, U.A.E., Other 220V Countries

TBR-21 23 23 23 23 12 12 Finland, Iceland, Licehtenstein, Luxembourg,

Czech, Norway, Sweden, Belgium, Cyprus,

Denmark, Hungary, France, Greece, Ireland, Italy,

Netherlands, Turkey, Switzerland, Germany, U.K.,

Austria, Portugal, Spain

Australia

S.Africa

Korea

23 23 12 12 23 23 Australia, South Africa, Korea

China 231212122312China

5. Secure the Fax Board in position using the

four Screws furnished with the kit.

4398U009AA

12123

Setting --- 12 Setting --- 23

6. Set the jumpers (JP1 to JP6) on the NCU

Board according to the applicable marketing

area.

* Refer to the jumper setting list by country

given below for the corresponding setting

positions according to the country.

4980U036AB

4034IXE017DA

4034-7181-01E.fm 2 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 3 –

7. Fit the TEL/LINE line connectors of the NCU

Board into the holes in the machine frame

and connect the NCU Board to the hookup

connector of the Fax Board.

NOTE

When performing this procedure, make

sure that the connector pins on the

backside of the NCU Board are properly

aligned with the mating holes.

4398U011AD

8. Secure the NCU Board using the four

Screws furnished with the kit.

4398U012AB

9. Secure the ground terminal of the NCU

Board. (one screw)

4398U013AA

10. Install the Speaker & Battery Assy.

(two screws)

4398U015AA

4398U016AA

11. Connect the speaker and battery connectors

to the Fax Board.

•Plug the battery connector into the upper

connector (P202).

•Plug the speaker connector into the lower

connector (P201).

12. Place the harness in the edge cover.

13. Reinstall the Rear Cover. (nine screws)

NOTE

Use the screw with washer to the position

indicated by the arrow.

4048U006AB

4034-7181-01E.fm 3 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 4 –

■Installing the Fax Board (if the printer controller is mounted)

1. Remove the Rear Cover. (nine screws)

4048U006AB

398IXE015DA

2. Using nippers, break the knockout ➀of the

Left Side Cover.

NOTE

If the NC-502 is to be mounted at the same

time, break both knockouts

➀

and

➁

➀

4398IXC004DA

3. Disconnect hookup harness of the Image

Controller Board.

4398IXC010DA

4. Remove the Image Controller Board.

(four screws)

4398IXC011DA

5. Change the position of the jumper (CJ1) on

the Control Board (from 1, 2 to 3, 4).

398IXC012DA

6. Connect the Fax Board to the hookup

connector of the Control Board.

7. Secure the Fax Board in position using the

four Screws furnished with the kit.

4398IXC013DA

4034-7181-01E.fm 4 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 5 –

Type Jumper Marketing area

1 2 3 4 5 6

STD(110V)UL

23 12 12 12 23 23

U.S.A., Canada, Taiwan, U.A.E., South America

STD(220V) Singapore, Malaysia, Hong Kong, Russia, Iran,

Bahrain, Qatar, Poland, Croatia, Slovenia, Baltic,

Romania, Ukraine, Kuwait, New Zealand,

Philippine, U.A.E., Other 220V Countries

TBR-21 23 23 23 23 12 12 Finland, Iceland, Licehtenstein, Luxembourg,

Czech, Norway, Sweden, Belgium, Cyprus,

Denmark, Hungary, France, Greece, Ireland, Italy,

Netherlands, Turkey, Switzerland, Germany, U.K.,

Austria, Portugal, Spain

Australia

S.Africa

Korea

23 23 12 12 23 23 Australia, South Africa, Korea

China 231212122312China

12123

Setting --- 12 Setting --- 23

8. Set the jumpers (JP1 to JP6) on the NCU

Board according to the applicable marketing

area.

* Refer to the jumper setting list by country

given below for the corresponding setting

positions according to the country.

4980U036AB

4034IXE017DA

9. Fit the TEL/LINE line connectors of the NCU

Board into the holes in the machine frame

and connect the NCU Board to the hookup

connector of the Fax Board.

NOTE

When performing this procedure, make

sure that the connector pins on the

backside of the NCU Board are properly

aligned with the mating holes.

4398IXC005DA

10. Secure the NCU Board using the four

Screws furnished with the kit.

4398IXC006DA

11. Secure the ground terminal of the NCU

Board. (one screw)

4398U013AA

12. Connect the Image Controller Board.

4398IXC007DA

13. Secure the Image Controller Board using

four screws.

4398IXC008DA

4034-7181-01E.fm 5 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 6 –

■Installing the Fax Panel

■Affixing the Panel Sheet (particular area only)

14. Connect the hookup harness connector,

which has been disconnected, to the

connector (P303) of the Image Controller

Board.

4508U007AA

15. Install the Speaker & Battery Assy.

(two screws)

4398U015AA

4398U016AA

16. Connect the speaker and battery connectors

to the Fax Board.

•Plug the battery connector into the upper

connector (P202).

•Plug the speaker connector into the lower

connector (P201).

17. Place the harness in the edge cover.

P202

P201

18. Reinstall the Rear Cover. (nine screws)

NOTE

Use the screw with washer to the position

indicated by the arrow.

4048U006AB

1. Remove the panel cover. (one screw)

4398U018AB

2. Connect the hookup connector of the Fax

Panel to the connector of the control panel.

4398U019AA

3. Secure the Fax Panel in position.

(one screw furnished with the kit)

NOTE

Fit the protrusion on the panel to the hook

on the machine.

4398U020AB

Affix the Panel Sheet to the Fax Panel.

4398U021AA

4034-7181-01E.fm 6 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 7 –

■Setting the Marketing Area -Marketing area setting list

1. Plug the power cord into the machine and

turn on the machine.

2. Call the SERVICE MODE to the screen.

(See the Service Manual for how to call the

SERVICE MODE to the screen.)

4506U008AA 4506U022AA

3. Touch the Yes key.

4506U135AA 4506U022AA

4. Press the ▼or ▲key to select the Marketing

area. (Refer to the marketing area setting list

on a right page.)

(Displayed at the location indicated by the

arrow.)

4506U136AA 4506U163CA

Marketing area Country

West Europe Spain, Italy, Belgium, Norway, Sweden, Netherlands, Finland,

Denmark, Switzerland, Ireland, Portugal, Greece, Austria.

France, United Kingdom, Iceland, Licehtenstein, Luxembourg,

Cyprus, Turkey, Czech, Hungary

Setting in

accordance

with each

Country

Germany, Bahrain, Baltic, Hong Kong, Indonesia, Israel, Korea,

Kuwait, Malaysia, New Zealand, Oman, Philippine, Poland,

Qatar, Romania, Russia, Saudi Arabia, Singapore, Slovakia,

Slovenia, Thailand, U.A.E., Ukraine, Taiwan, U.S.A.,

Canada=U.S.A., China, Australia, South Africa

STANDARD Brazil, Argentina, Curacao, Southeast Asia, Iran, Croatia,

Latin America (Central/South America)

5. Touch the Yes key.

4506U136AA 4506U022AA

4034-7181-01E.fm 7 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 8 –

■Setting the shipment destination

■Setup shipment destination.

1. Call the SERVICE MODE to the screen.

(See the Service Manual for how to call the

SERVICE MODE to the screen.)

4506U008AA

2. Touch the Yes key.

4506U008AA 4506U022AA

3. Press the ▼key.

4506U135AA 4506U163CA

4. Touch the Yes key.

4506U137AA 4506U022AA

No. Description

0Metric

1Inch

2 Japan

3China

4 Latin America (Metric)

5 Latin America (Inch)

5. Press the ▼or ▲key to select the applicable

marketing area (displayed at the location

indicated by the arrow).

4506U138AA 4506U163CA

6. Touch the Yes key.

7. Press the Panel Reset key to display the

initial screen again.

4506U138AA 4506U022AA

4034-7181-01E.fm 8 ページ２００５年３月２３日　水曜日　午後４時２６分

FK-505

– 9 –

■Setting the Auto Power OFF Mode

1. Press the Utility key and call the Machine

Setting to the screen.

4508U015CA

2. Press the ▼key three times.

4508U009CA C4506o009CA

3. Touch the Yes key.

4508U010CA 4506U022AA

4. Press “0” of the 10-Key Pad six times.

NOTE

If an Administrator Code has been

programmed, ask the Administrator to type

it.

4508U011CA 4348U093CA

5. Touch the Yes key.

4508U012CA 4506U022AA

6. Touch the Yes key.

4508U013CA 4506U022AA

7. Press the Wor Xkey to select “ENABLE”.

C4508U014CC 1382U001CB

8. Touch the Yes key.

C4508U014CC 4506U022AA

4034-7181-01E.fm 9 ページ２００５年３月２３日　水曜日　午後４時２６分

Otros manuales para BIZHUB 162

Este manual sirve para los siguientes modelos

Otros manuales de Máquina de fax de Konica Minolta

Konica Minolta

Konica Minolta FK-102 Manual de usuario

Konica Minolta

Konica Minolta bizhub C20X Manual de usuario

Konica Minolta

Konica Minolta Minoltafax 1100 Manual de usuario

Konica Minolta

Konica Minolta Minoltafax 2800 Manual de usuario

Konica Minolta

Konica Minolta FAX 9820 Manual de usuario

Konica Minolta

Konica Minolta Bizhub C3350 Manual de usuario

Konica Minolta

Konica Minolta FK-514 Manual de usuario

Konica Minolta

Konica Minolta FK-116 Manual de usuario

Konica Minolta

Konica Minolta PagePro 1390 MF Manual de usuario

Konica Minolta

Konica Minolta bizhub 225i Manual de usuario

Konica Minolta

Konica Minolta 9880 Manual de usuario

Konica Minolta

Konica Minolta bizhub C220 Series Manual de usuario

Konica Minolta

Konica Minolta Fax 9930 Manual de usuario

Konica Minolta

Konica Minolta Minoltafax 1600e Manual de usuario

Konica Minolta

Konica Minolta FK-513 Manual de usuario

Konica Minolta

Konica Minolta FK-502 Manual de usuario

Konica Minolta

Konica Minolta Fax Kit (FX-3) Manual de usuario

Konica Minolta

Konica Minolta 9760 Manual de usuario

Konica Minolta

Konica Minolta 9825 Manual de usuario

Konica Minolta

Konica Minolta FK-505 Manual de usuario

Konica Minolta

Konica Minolta MC1690MF Manual de usuario

Konica Minolta

Konica Minolta Magicolor 2590 MF Manual de usuario

Konica Minolta

Konica Minolta Minoltafax 1800 Manual de usuario

Konica Minolta

Konica Minolta bizhub C25 Manual de usuario

Manuales populares de Máquina de fax de otras marcas

Samsung

Samsung SF-515 Manual de usuario

Radio Shack

Radio Shack TFX-1031 Manual de usuario

imagistics

imagistics 2030 Manual

Panasonic

Panasonic KX-FL501C Manual de usuario

Panasonic

Panasonic KX-FP200L Manual de usuario

Furuno

Furuno FAX-30 Manual de usuario

Savin

Savin 3740 Manual

Sharp

Sharp FO-51 Manual de usuario

Muratec

Muratec MFX-C3035 Manual de usuario

Panasonic

Panasonic KX-PD505DL Manual de usuario

Panasonic

Panasonic KX-FC265CX-S Manual de usuario

Canon

Canon FAX-L400 Manual de usuario

Ricoh

Ricoh 1000L Guía de inicio rápido

Sharp

Sharp FO-3150 Manual de usuario

Kyocera

Kyocera KM-F1060 Manual de usuario

Sharp

Sharp FO-2970M Manual de usuario

Panasonic

Panasonic KX-F850 Manual de usuario

Panasonic

Panasonic KX-FLM652CX Manual de usuario