Konica Minolta 7022 Manual de usuario

Basic

Advanced

7022/7130

INSTRUCTION MANUAL

7022/7130

Thank you very much for your purchase of the Konica 7022/7130.

This Manual deals with making copies, correct handling of the machine, and

precautions for safety. Please read before copying.

In order to maintain a satisfactory copying performance, please keep this

Manual readily available for reference in the right hand rear pocket of the

machine.

ENERGY STAR®Program

The ENERGY STAR Program has been established

to encourage the widespread and voluntary use of

energy-efficient technologies that reduce energy

consumption and prevent pollution. As an ENERGY

STAR Partner, Konica Corporation, Inc. has

determined that this product meets the ENERGY

STAR guidelines for energy efficiency grounding it on

the following features.

Auto Low Power

This function conserves energy by lowering the set temperature of the fixing

unit. In the standard setting, Auto Low Power operates automatically when 1

minute have elapsed after completion of the last copy, with the copier remaining

in the ready to copy state during that time.

The time period for the Auto Low Power function can be set for 1 minute, 5

minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120

minutes, or 240 minutes. See p. 2-12 for details.

Automatic Shut-Off

This function achieves further energy conservation by partially turning OFF the

power supply, thereby reducing energy consumption to 20W or less. In the

standard setting, Automatic Shut-Off follows Auto Low Power, operating

automatically when 1 minute (for a machine with no option)/15 minutes (for the

machine with options) have elapsed after completion of the last copy, with the

copier remaining in the ready to copy state during that time.

The time period for the Automatic Shut-Off function can be set for 1 minute, 5

minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120

minutes or 240 minutes. See p. 2-12 for details.

Automatic Duplex Copying

To reduce paper consumption, use this function to make double-sided (duplex)

copies, automatically.

We recommend that you utilize the Auto Low Power function, the Automatic

Shut-Off function, and the Automatic Duplex Copying function.

Safety

Information

Machine

Information

Copying

Operations

Job Memory

&Help Mode

Trouble-

shooting

Machine

Specifications

Advanced

Information

Applications

Maintenance

& Supplies

Paper &

Original Info

Key Operator

Mode

Contents

Features of the Konica 7022/7130

Basic

Section 1: Safety Information

Caution Labels and Indicators ..............................................................................1-2

Requirements for Safe Use...................................................................................1-4

Power Source.............................................................................................................1-4

Environment...............................................................................................................1-5

Precautions for Routine Handling ..............................................................................1-7

Section 2: Machine Information

Machine Configuration ..........................................................................................2-2

External Machine Items .............................................................................................2-2

Internal Machine Items ..............................................................................................2-4

Standard/Optional Equipment....................................................................................2-5

Basic Screen..............................................................................................................2-6

Control Panel Layout..................................................................................................2-8

Turning On the Power Switch................................................................................2-9

To Turn On the Power ................................................................................................2-9

To Turn Off the Power ..............................................................................................2-11

Reducing the Power in Standby Mode (Auto Low Power)........................................2-12

Shutting Off Automatically (Auto Shut-Off)...............................................................2-12

Shutting Off / Reducing the Power Manually ...........................................................2-13

Entering an EKC Password (EKC)...........................................................................2-14

Loading Paper.....................................................................................................2-15

Loading Paper in Main Body Trays and DB-210 Trays.............................................2-15

Loading Paper in DB-410 Tray .................................................................................2-17

Loading Paper in Multi-Sheet Bypass Tray ..............................................................2-18

Changing Paper Size of Main Body Trays and DB-210 Trays .............................2-19

Safety

Information

Machine

Information

Contents (continued)

Section 3: Copying Operations

Positioning Originals .............................................................................................3-2

Positioning Originals in RADF....................................................................................3-2

Positioning Original on Platen Glass..........................................................................3-5

Setting Print Quantity ............................................................................................3-7

To Set Print Quantity ..................................................................................................3-7

To Change Print Quantity...........................................................................................3-7

Selecting Paper Size.............................................................................................3-8

To Select Paper Size Automatically (APS) .................................................................3-8

To Specify Desired Paper Size (AMS) .....................................................................3-10

Selecting Magnification Ratio (Lens Mode) ........................................................3-12

To Copy in 1.00 Magnification Mode........................................................................3-12

To Copy in Fixed Magnification Mode (FIXED) ........................................................3-13

To Copy in Zoom Mode ............................................................................................3-14

Selecting Density Level.......................................................................................3-15

To Select Copy Density............................................................................................3-15

Making Double-Sided Copies (1

2, 2

2) ..........................................................3-17

Using RADF .............................................................................................................3-17

Using Platen Glass ..................................................................................................3-19

Making Single-Sided Copies from Double-Sided Originals (2

1) ......................3-21

Copying Using Memory.......................................................................................3-22

To Scan Originals into Memory (Store Mode)..........................................................3-22

To Set Next Copying Job (Reserve).........................................................................3-25

To Check/Control Jobs in Progress (Job List Screen)..............................................3-27

Output Mode for Machine without Finisher .........................................................3-29

Output Mode for Machine with Finisher ..............................................................3-31

Output Mode for Machine with Inner Tray IT-101 ................................................3-34

Checking Feature Selections and Proof Copying ...............................................3-36

Interrupt Copying ................................................................................................3-38

Section 4: Job Memory & Help Mode

Storing Job Conditions (Job Memory: Job Store) .................................................4-2

Recalling Stored Job Settings (Job Memory: Job Recall).....................................4-5

Displaying Screen for Operation Guide (Help Mode)............................................4-7

To Display Help Screen from Basic Screen ...............................................................4-7

To Display Help Screen from Other Screens .............................................................4-9

Copying

Operations

Job Memory

&Help Mode

Contents (continued)

iii

Section 5: Troubleshooting

When “Call for Service” Message is Displayed.....................................................5-2

Limited Use of the Copier in Trouble..........................................................................5-3

Preventive Maintenance........................................................................................5-4

Clearing Mishandled Paper...................................................................................5-5

When “JAM” Appears on Folder Key.....................................................................5-7

When “ADD PAPER” Appears on Folder Key .......................................................5-9

When “Memory Full” Message Is Displayed (Memory Overflow)........................5-10

Action 1 ....................................................................................................................5-10

Action 2 ....................................................................................................................5-11

When Power OFF/ON Screen Is Displayed ........................................................5-12

Troubleshooting Tips...........................................................................................5-13

Section 6: Machine Specifications

Main Body Specifications......................................................................................6-2

Option Specifications ............................................................................................6-3

Trouble-

shooting

Machine

Specifications

Safety

Information

Machine

Information

Copying

Operations

Job Memory

&Help Mode

Trouble-

shooting

Machine

Specifications

Advanced

Information

Applications

Maintenance

& Supplies

Paper &

Original Info

Key Operator

Mode

Contents (continued)

Advanced

Section 7: Advanced Information

Programmed Shut-Off (Weekly Timer)..................................................................7-2

Rotation.................................................................................................................7-4

Vertical/Horizontal Zoom Mode.............................................................................7-6

Section 8: Applications

To Display Application Selection Screen...............................................................8-2

Inserting Sheets and Covers (Sheet/Cover Insertion) ..........................................8-3

Positioning Title Pages on the Right Side (Chapter).............................................8-7

Lay Out Several Pages onto One Sheet (Combination)......................................8-10

Making a Multiple Page Signature Booklet (Booklet)..........................................8-13

Copying onto Transparent Films (OHP) ..............................................................8-16

Inserting Images into Printed Sets (Image Insert) ..............................................8-18

Dividing an Image into Right and Left Pages (Dual Page)..................................8-21

Copying Mixed Size Originals (Mixed Original)...................................................8-25

Copying Folded Originals (Folded Original) ........................................................8-27

Copying Non-Standard Size Originals (Non-Standard Size)...............................8-29

Reverse the Second Side in 1-2 Mode (Flip Side 2)...........................................8-31

Making Copy Quality Closer to Originals (Text/Photo Enhance).........................8-34

Reversing Colour in Black and White Image (Reverse Image) ...........................8-37

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) ............................8-39

Repeating Automatically or Selecting Repeating Times

(Repeat: AUTO/ Repeat Mode) ...................8-42

Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure)..................8-46

Copying Image in the Centre of Copy Paper (AUTO Layout) ..............................8-49

Adjusting Position of Copy Image (Image Shift)..................................................8-51

Reducing Images to Create Binding Margin (Reduce&Shift)..............................8-53

Erasing Outside of the Original (Non-Image Area Erase)...................................8-56

Printing Stamp, Page, Watermark onto Copies (Stamp).....................................8-58

Overlaying an Image onto Each Page Copied in the Job (Overlay)....................8-63

Advanced

Information

Applications

Contents (continued)

Section 9: Paper and Original Information

Paper Information..................................................................................................9-2

Paper Weight .............................................................................................................9-2

Tray/ Exit Tray Capacity..............................................................................................9-3

Paper Size..................................................................................................................9-4

Special Paper in Multi-Sheet Bypass Tray .................................................................9-5

To Store Copy Paper..................................................................................................9-5

Original Information...............................................................................................9-6

Platen Glass Originals ...............................................................................................9-6

RADF Originals..........................................................................................................9-7

Section 10: Maintenance & Supplies

Adding Toner.......................................................................................................10-2

Inserting a New Staple Cartridge into FS-107 Finisher ......................................10-5

Cleaning Image Scanning Section......................................................................10-9

Cleaning the Document Glass and Cover................................................................10-9

Cleaning the RADF ................................................................................................10-10

Cleaning Image Printing Section.......................................................................10-12

Checking Copy Count .......................................................................................10-14

Section 11: Key Operator Mode

How to Access the Key Operator Mode ..............................................................11-2

To Display the Key Operator Mode Screen ..............................................................11-2

[1] System Initial..................................................................................................11-4

[1] Time....................................................................................................................11-4

[2] Language ............................................................................................................11-6

[2] Copier Initial ...................................................................................................11-7

[1] Copy Mode..........................................................................................................11-8

[2] Density................................................................................................................11-9

[3] Magnification.....................................................................................................11-10

[4] Tray ...................................................................................................................11-11

[5] Output ...............................................................................................................11-12

[6] Non-Image Erase..............................................................................................11-14

[3] Preset Key....................................................................................................11-15

[1] Density..............................................................................................................11-15

[2] Magnification.....................................................................................................11-17

Paper &

Original Info

Maintenance

& Supplies

Key Operator

Mode

Safety

Information

Machine

Information

Copying

Operations

Job Memory

&Help Mode

Trouble-

shooting

Machine

Specifications

Advanced

Information

Applications

Maintenance

& Supplies

Paper &

Original Info

Key Operator

Mode

Contents (continued)

Section 11: Key Operator Mode (continued)

[4] E.K.C. (Electronic Key Counter)...................................................................11-18

How to Access the EKC Setting Mode...................................................................11-19

[1] Change EKC Data ............................................................................................11-20

[2] EKC Data List ...................................................................................................11-22

[3] All Counter Reset..............................................................................................11-24

[4] EKC On/Off Setting...........................................................................................11-25

[5] Copy Limit Reached Effect................................................................................11-26

[5] Lock Job Memory.........................................................................................11-27

[6] Paper Type ...................................................................................................11-28

[7] Panel Contrast .............................................................................................11-29

[8] Key Operator Data .......................................................................................11-30

[9] Weekly Timer ...............................................................................................11-31

How to Access the Weekly Timer Setting Mode ....................................................11-32

[1] Weekly Timer Setting........................................................................................11-33

[2] Weekly Timer Copier ON/OFF Time Set ..........................................................11-34

[3] Machine Working Day Individual Set ................................................................11-36

[4] Lunch Hour Off Function...................................................................................11-38

[5] Password Setting ..............................................................................................11-39

[10] Touch Panel Adjustment ............................................................................11-40

[11] Power Save ................................................................................................11-41

[12] Memory Switch ..........................................................................................11-42

[13] List Print.....................................................................................................11-46

[14] Application Customize ...............................................................................11-47

[15] Density Shift...............................................................................................11-48

[16] KRDS Host.................................................................................................11-49

Index

vii

Features of the Konica 7022/7130

• AE - Automatic Exposure

Automatically adjusts exposure to compensate for quality of the original.

• AMS - Automatic Magnification Selection

Automatically selects an appropriate magnification ratio when Paper Size is selected

manually. Automatically selected when the AMS key is touched.

• APS - Automatic Paper Selection

Automatically selects copy paper size to match the original documents.

• ATS - Automatic Tray Switching

Automatically switches tray to allow copying to continue without interruption if the

selected tray empties while copying is in progress.

• Auto Layout

The original image on the platen glass or in the document feeder is copied and centred

on a sheet.

• Auto Low Power

Automatically lowers the power after a specified period of copier inactivity.

• Auto Reset

Automatically resets to auto mode defaults after a specified period of copier inactivity.

• Auto Shut-Off

Automatically shuts off the main power after a specified period of copier inactivity.

• Booklet

Creates A4R or A4 size booklets from A4 size originals in 1

2 or 2

2 copy mode.

• Chapter

Starts chapter pages on the right side (front pages) of the finished document. Only

duplex mode (1

2 or 2

2) is compatible with this feature.

• Combination

Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper to create a

draft copy of a multi-page report at the same time as saving paper.

• Copy Density

Manually selects up to 9 density levels.

• Copy Mode

Selects the desired simplex mode (1

1 or 2

1); or duplex mode (1

2 or 2

2).

• Counter List

Displays on the screen and prints the following data: total counter of the machine,

copier counter, FAX Tx/Rx counter, print counter and the date when the counter

started.

Features of the Konica 7022/7130 (continued)

viii

•DensityShift

Shifts each of nine density levels in four density modes (Auto, Text, Photo, Increase

Contrast) to three levels lighter or three levels darker.

•DualPage

Copies both pages of an open book or book-size sheet separately onto two A4 sheets

in 1

1 mode or separately onto each side of one A4 sheet in 1

2 mode. You can use

the Dual Page mode with the Front or Front/Back cover mode. The cover page(s) will be

scanned and copied normally before image division is performed on the other pages.

• Flip Side 2

1-2 Flip Side 2 arranges the even pages of the simplex originals upside down on the

reverse side of duplex copies.

Similarly, 2-1 Flip Side 2 rearranges the reverse side of duplex originals which reads

upside down to make normal simplex copies.

• Folded Original

This feature sets the RADF to accept folded originals.

• Frame/Fold Erasure

Erases border and/or fold image area using Frame (1-15mm), Fold (1-30mm), Top (1-

100mm), and/or Bottom (1-100mm).

• Image Insert

Stores pages in memory from the platen glass, and inserts the pages into a document

copied from the document feeder.

•ImageShift

Creates or removes a binding margin at the top, bottom, right and left edges (shift amount

from -250mm ~ +250mm, in 1mm increments); reduces image to prevent image loss

(reduce & shift amount from -250mm ~ +250mm, in 1mm increments).

• Interrupt Copying

Interrupts copying-in-progress to perform an urgent copy, using any of the copier

features for the interrupt job.

• Job List

Displays the Job List Screen to view the current machine status, changes the operation

order of reserve jobs, or deletes the unused reserve job.

• Job Memory

Programs up to 15 jobs and recalls each job by job number, as needed. All compatible

platen glass functions can be programmed into Job Memory directly after they are

selected.

• Lens Mode (FIXED, Zoom)

Selects fixed ratios, three reduction, three enlargement, and three user-set ratios.

Zoom ratios can be selected from 25% ~ 400% in 1% increments.

Otros manuales para 7022

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Konica Minolta

Konica Minolta

Konica Minolta PagePro 1390 MF Guía de inicio rápido

Konica Minolta

Konica Minolta bizhub C360 Series Manual de usuario

Konica Minolta

Konica Minolta bizhub 751 Manual de usuario

Konica Minolta

Konica Minolta Di552 Manual de instrucciones

Konica Minolta

Konica Minolta MAGICOLOR 2300 Series Manual de usuario

Konica Minolta

Konica Minolta IF-118 Manual de usuario

Konica Minolta

Konica Minolta 7020 Manual de usuario

Konica Minolta

Konica Minolta bizhub C658 Manual de usuario

Konica Minolta

Konica Minolta bizhub C452 Series Manual de usuario

Konica Minolta

Konica Minolta bizhub 180 Manual de usuario

Konica Minolta

Konica Minolta bizhub c3110 Manual de usuario

Konica Minolta

Konica Minolta bizhub C3100P Manual de usuario

Konica Minolta

Konica Minolta bizhub 42 Manual de usuario

Konica Minolta

Konica Minolta bizhub 652 Manual de usuario

Konica Minolta

Konica Minolta bizhub 361 Manual de usuario

Konica Minolta

Konica Minolta bizhub 266 Manual de usuario

Konica Minolta

Konica Minolta bizhub C280 Series Manual de usuario

Konica Minolta

Konica Minolta Bizhub C3850 Instrucciones originales

Konica Minolta

Konica Minolta bizhub 501 Manual de usuario

Konica Minolta

Konica Minolta bizhub PRESS C1100 Manual de usuario

Konica Minolta

Konica Minolta Bizhub 362 Manual de usuario

Konica Minolta

Konica Minolta bizhub 361 Manual de usuario

Konica Minolta

Konica Minolta bizhub C754 Manual de usuario

Konica Minolta

Konica Minolta bizhub PRO 1051 Series Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Brother

Brother MFC-J430w Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce

Oce VarioLink 5022 Manual de usuario

Copystar

Copystar CS 4551ci Manual de usuario