Komatsu PC4000 Manual de usuario
PC4000Asrev05
Edition 08/2005 1
General Assembly Procedure
Hydraulic Mining Shovel PC4000
________________________________________________________________________
________________________________________________________________________
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 2
Z23038
All stated information corresponds
to the present development and is
subject to possible future changes
without prior notice.
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 3
PAGE
GENERAL CONTENT
1. Overviews
1.1 Superstructure 5
1.2 Engine House 7
2. General
2.1 Delivery of the Excavator 9
2.2 Assembling of the Excavator 9
2.3 Transportation and Lifting 11
2.4 Manpower / Assembly Time 13
2.5 Assembly Site Requirements 15
2.6 Space and Placing Requirements 19
2.7 Preparation for Assembly 19
2.8 Basic Measurements and Weights 19
2.9 Transport Dimensions and Weights 21
3. Assembly sequence
3.1. Assembly of Undercarriage 23
3.1.1 Mounting of travel gear breather filters 25
3.1.2 Track tensioning system 27
3.2 Assembly of Superstructure onto the Undercarriage 29
3.3 Assembly of engine house 31
3.4 Mounting of Boom 33
3.5 Mounting of Hydraulic Oil Tank 35
3.6 Mounting of Hydraulic Oil Cooler 37
3.7 Mounting of Fuel Tank 39
3.8 Mounting of Hydraulic access Ladder 41
3.9 Mounting of Cab Base 43
3.10 Mounting of Counterweight 45
3.11 Mounting of Handrails, Steps and Gratings 47
3.12 Mounting of Cable transfer to the Operators Cab 49
3.13 Mounting of Cab 53
3.13.1 Mounting of cab air cleaner 55
3.14 Mounting of Bucket Cylinders 57
3.15 Mounting of Stick 59
3.15.1 Mounting of stick (backhoe) 61
3.16 Filling up hydraulic oil tank 63
3.17 Bleed air from all hydraulic tanks 65
3.18 Filling up fuel tank 67
3.19 Pre-checks prior Initial Start-up 69
3.20 Mounting of stick cylinders to the stick 73
3.21 Assembly of Bullclam Bucket to the Stick 75
3.22 Mounting of the pin seals 79
3.22.1 Mounting of pin seals (backhoe) 81
3.23 Connection of the cable harnesses
to the terminal rails in the switch box “X2” 83
3.24 Putting the Central Lubrication System into operation 87
3.25 Standard Application Torque Chart 89
2 cranes
1 crane
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 4
Z22586
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 5
1.1 Overview Superstructure (Z22586)
(1) Operator's cab with Falling Object Protective Structure (FOPS)
(2) Battery main switches
(3) Air cleaner for engine
(4) Cab support, contains the electric control system
(5) Swing circle
(6) Fuel tank
(7) Hydraulically operated access ladder
(8) Counter weight
(9) Hydraulic oil cooler
(10) Hydraulic oil reservoir
(11) Power take off (PTO) with hydraulic pumps
(12) Flexible coupling, oil filled
(13) Diesel engine
(14) Batteries
(15) Radiator
(16) Control valves with high pressure in-line filters
(17) Swing machinery
(18) Central lubrication system (CLS)
(19) Swing circle pinion lubrication system (SLS)
(20) Emergency escape ladder
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 6
Z21446
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 7
1.2 Overview Engine House (Z21446)
(1) Exhaust mufflers
(2) Engine air cleaner
(3) Expansion tank for radiator
(4) Central control and filter carrier
(5) Power take off (PTO)
(6) Main hydraulic pumps
(7) Auxiliary piggipack hydraulic pumps
(8) Hydraulic pump for radiator fan drive
(9) Hydraulic pump for the hydraulic oil cooler fan drive
(10) Suction oil reservoir
(11) Flex coupling, oil filled
(12) Batteries
(13) Diesel engine
(14) Hydraulic motor for radiator fan drive
(15) Coolant radiator with fuel cooler section
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 8
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 9
2. General
2.1 Delivery of the Excavator
The excavator is being delivered disassembled into its main
components. For the correct dimensions and weights please refer to the
packing list of your machine.
For assembling the excavator follow the instructions in this manual.
2.2 Assembling of the Excavator
ã
•Personnel entrusted with work on the machine must have read
the Assembly Manual, the Operation,- Lubrication- and
Maintenance Manual and in particular the section on safety
before beginning work. Reading the instructions after work has
commenced is too late
If there are any questions concerning the assembling procedure,
contact your local Service Center.
Prior to first operation, inspect the excavator thoroughly with the Service
Engineer responsible for the erection of the machine. Check all fluid
levels according to the Lubrication and Maintenance Schedule.
Damages and defects caused by incorrect operation and maintenance
are not covered by the manufacturers guarantee.
)
•If the excavator is equipped with a fire suppression system,
make sure that the system is ready for operation.
Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005 10
Otros manuales para PC4000
1
Tabla de contenidos
Otros manuales de Excavador de Komatsu
Komatsu
Komatsu PC300LC-8 Guía de instalación
Komatsu
Komatsu PC308USLC-3E0 Manual
Komatsu
Komatsu PC130-6K 2001 Manual
Komatsu
Komatsu PC18MR-3 Guía de instalación
Komatsu
Komatsu PC290LC-10 Manual
Komatsu
Komatsu PC200 -8 Guía de instalación
Komatsu
Komatsu PC110R-1 Manual
Komatsu
Komatsu PC700LC-11 Manual
Komatsu
Komatsu Galeo PC138US-8 Manual de usuario
Komatsu
Komatsu PC128US-8 Guía de instalación
Komatsu
Komatsu PC290LC-6K Manual
Komatsu
Komatsu PC450-8 Manual
Komatsu
Komatsu D51EX -24 Guía de instalación
Komatsu
Komatsu PC138USLC Manual
Komatsu
Komatsu PC350LC-8 Manual
Komatsu
Komatsu PC450LC-8 Manual
Komatsu
Komatsu PC27MR-3 Guía de instalación
Komatsu
Komatsu GALEO PC40MR-2 Manual
Komatsu
Komatsu PC27R-8 DELUXE Guía de instalación
Komatsu
Komatsu PC450-8 Manual de usuario
