Kogan KADCAXXUSBA Manual de usuario
KADCAXXUSBA
USER MANUAL
USB Analogue to Digital Video Converter User Guide -
2
User’s Notice
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in
any form or by any means, except documentation kept by the purchaser for backup purposes,
without the express written permission of Kogan.
WE PROVIDE THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL KOGAN, ITS DIRECTORS, OFFICERS,
EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS), EVEN IF WE
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by us; or (2) the serial
number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent infringe.
Windows, MS-DOS, and DirectX are registered trademarks of Microsoft Corporation.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
The product name and revision number are both printed on the product itself. Manual revisions are
released for each product design represented by the digit before and after the period of the manual
revision number. Manual updates are represented by the third digit in the manual revision number.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE
FURNISHED FOR INFORMATION USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY
TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY
US. WE ASSUME NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Copyright © 2011. All Rights Reserved.
3
Contents:
Chapter 1: Introduction ...................................................................................................................... 4
1.1 - Package Contents ............................................................................................................... 4
1.2 - System Requirements ........................................................................................................ 4
Chapter 2: Getting Started ................................................................................................................. 5
2.1 - Hardware Installation ........................................................................................................ 5
2.2 - Device Driver Installation ................................................................................................. 5
2.3 - Install the DirectX® ........................................................................................................ 10
2.4 - Install the Utility software. .............................................................................................. 11
Chapter 3: Launch the Program ....................................................................................................... 16
3.1 - Running the for the first time .......................................................................................... 16
3.2 - Recorder Video ................................................................................................................ 18
3.3 - Playback Video ................................................................................................................ 18
3.4 - Browse Image .................................................................................................................. 20
Chapter 4: Technical Support ........................................................................................................... 21
4
Chapter 1: Introduction
1.1 - Package Contents
The following items are included in the package.
CD Setup Disc (includes Software Driver and Utility Software)
USB Analogue to Digital Video Converter
USB Cable
1.2 - System Requirements
Intel Pentium IV 2.0.GHz CPU or better processor
Minimum 256 MB memory
Minimum 1GB hard disk space available
VGA and with DirectDraw® driver supporting 16 bit color or higher
One free USB host
USB 2.0 compliant interface
Microsoft Windows® XP/ Windows Vista™
CD-ROM drive for driver and software installation
5
Chapter 2: Getting Started
2.1 - Hardware Installation
Refer to the device connection diagram below for port connections:
1. Connect the Device to PC USB Hub.
2.2 - Device Driver Installation
Place the CD software that comes with the Video Converter in the CD-ROM drive.
(Assuming that theVideo Converter is properly installed to the computer’s USB host), then
follow the on-screen installation guide below.
Device driver installation for Windows® XP Home/Professional Edition/x64 Edition
1. When the computer is powered-on for the
very first time during the setup, a
message “Found New Hardware Wizard”
dialogue box will appear on the screen.
Click “Cancel” button to close “Found New
Hardware Wizard” window.
6
2. Insert the Video Converter setup CD into
the CD-ROM or DVD-ROM, “Driver &
Utilities” setup screen will appear. Click
“Setup Driver” button.
3. Wait Installation Wizard copying
necessary driver files onto your system.
4. Click “Finish” button
7
5. To make sure the driver is installed and
started open the “Device Manager” Utility
right after the installation. Go to “Control
Panel”, double-click “System”, click on
“Hardware” tab, click on “Device Manager”,
double-click the “Sound, video and game
controller”
8
Device driver installation for Windows Vista™
1. When the computer is powered-on for the
very first time during the setup, a
message “Found New Hardware”
dialogue box will appear on the screen.
Click “Cancel” button to close “Found New
Hardware” window.
2. Insert the USB TV box setup CD into the
CD-ROM or DVD-ROM, “Driver & Utilities”
setup screen will appear. Click “Setup
Driver” button.
3. Wait Installation Wizard copying
necessary driver files onto your system.
9
4. Click “Finish” button.
5. To make sure the driver is installed and
started open the “Device Manager” Utility
right after the installation. Go to “Control
Panel”, double-click “System”, click on
“Hardware” tab, click on “Device
Manager”, double-click the “Sound, video
and game controller”
10
2.3 - Install the DirectX®
Microsoft DirectX® allows 3D hardware acceleration support in Windows® XP/64 bit and
Windows Vista™ 32bit/64bit. Follow the installation steps below to install MS DirectX®.
1. Insert the installation CD into the
CD-ROM drive. The setup screen will
automatically appear.
2. Click the “DirectX” button.
3. Click “Accept the agreement” radio button
then click “Next”
4. Click “Next” to confirm the installation of
DirectX
Tabla de contenidos
Otros manuales de Adaptador de Kogan
