Koden MDC-5000 Series Manual de usuario

MDC-5000/5200/5500/7000(P)/7900(P) Series Revision History

0093855002-00 i

MDC-5000/5200/5500/7000(P)/7900(P) Series Service Manual

Doc No: 0093855002

Document Revision History

No.

Doc. No./Rev. No.

Revised Date

(Y/M/D)

Revised content

0093855002-00

2018/05/31

First edition

Document No. Revised Version Norm

When part of the document needs to be revised, the document has advanced revision number.

The document No. is indicated at the lower right side on the cover and at the left or right side of the

footer region of each page.

No part of this publication may be reproduced, transmitted, translated in any from by any means without

the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this

publication are subject to change without notice. Koden assumes no responsibility for any errors,

incidentals or consequential damages caused by misinterpretation of the descriptions contained in this

publication.

Important Notice MDC-5000/5200/5500/7000(P)/7900(P) Series

ii 0093855002-00

Important Notice

For copy and transcription of this Service Manual (hereinafter referred to as this manual),

permission from Koden is needed. Koden prohibits the un-authorized copy and transcription of this

manual.

If this manual is lost or damaged, consult a dealer of Koden or Koden.

The specification of the products and the contents in this manual are subject to change without

notice.

The contents displayed on the menu of product may be different from the expression of this

manual. The fonts and shapes of the keys and menus in the illustration may differ from the actual

ones, and some parts may be omitted.

Koden is not liable for damages and troubles arisen from misunderstanding of the contents in this

manual.

Koden is not liable for any damages caused by earthquake, lightning, wind and flood damage and

fire for which Koden is not responsible, and actions by third parties, other accidents, customer’s

unintended error/abuse and the use under other abnormal conditions.

Koden is not liable for damages of accompaniment (change/loss of memorized content, loss of

business profit, stop of business) arisen from use or failure of our products.

If the stored data are changed or lost, irrespective of causes of troubles and damages, Koden is

not liable for them.

Koden is not liable for any damages arisen from malfunction caused by combination of software

and connected equipment in which Koden is not engaged.

MDC-5000/5200/5500/7000(P)/7900(P) Series For Your Safe Operation

0093855002-00 iii

For Your Safe Operation

Symbols used in this Service Manual

This manual uses the following symbols. Understand the meaning of each symbol and implement the

maintenance and inspection.

Symbol

Meaning

Mark for warning

This symbol denotes that there is a risk of death or serious injury when

not dealing with it correctly.

Mark for danger high voltage

This symbol denotes that there is a risk of death or serious injury caused

by electric shock when not dealing with it correctly.

Mark for caution

This symbol denotes that there is a risk of slight injury or damage of

device when not dealing with it correctly.

Mark for prohibition

This symbol denotes prohibition of the specified conduct. Description of

the prohibition is displayed near the mark.

IMPORTANT

Mark for important matters

This mark denotes that there is a possibility that data loss may interfere

the operation or that the expected result may not be obtained when the

radar is not dealt correctly.

Mark for reference

This mark shows the part to be referred to concerning this description.

For Your Safe Operation MDC-5000/5200/5500/7000(P)/7900(P) Series

iv 0093855002-00

Caution Item on Equipment

Caution on a high voltage inside.

Ahigh voltage, which may risk your life, is used. This high voltage remains

in the circuit after you have powered off switch. To prevent touching the

high voltage circuit inadvertently, the protective cover is provided to the

high voltage circuit and the high voltage caution label is affixed. Ensure to

power off switch for your safety and discharge the electricity remaining in

the capacitor before starting to check. An engineer authorized by our

company should inspect and maintain the circuit.

Be sure to switch off the power in the boat.

If the power switch is inadvertently powered on during work, you will be

electrified. To prevent such accident from occurring, ensure to switch off

the power in the boat and the power of equipment. Furthermore, it is safer

to hang the caution tag with description of [Under Work] near the power

switch of equipment.

Caution on dust

Inhaling dust may cause respiratory disease. When cleaning the inside of

equipment, be careful not to inhale dust. Wearing a safety mask is

recommended.

Caution on location of equipment

Do not install the equipment where it is excessively damp and suffers from

excessive water drops.

Caution on static electricity

The static electricity may be generated from the carpet on the floor in the

cabin or clothes made of synthetic fiber. The static electricity may destroy

the electronic parts on the circuit board. Handle the circuit board, taking

the suitable anti-static measures.

Prohibited matter

Any Display and Scanner unit combination other than specified in the

manual is prohibited and will void manufacturer’s warranty.

MDC-5000/5200/5500/7000(P)/7900(P) Series For Your Safe Operation

0093855002-00 v

Caution Items on Handling

Caution on the rotating aerial

The radar antenna may start to rotate without notice. Please stand clear from

the antenna for your safety.

Caution on electromagnetic disturbance

The operating Antenna & Scanner unit radiates high-energy electromagnetic

wave. It may cause harmful effect for human body due to its continuous

radiation. As International regulation says, electromagnetic waves less than

100 watt/m2does not have a harmful effect on human bodies, but some kind of

medical devices such as heart pacemakers are sensitive even under the low

energy electromagnetic wave. Any personnel with such a device should keep

away from the electromagnetic wave generating position at all times.

Specified power density and distance from the radar (in accordance with the

provision as specified in IEC 60945)

Model name

Transmission power /

Antenna length

100W/m2

50W/m2

10W/m2

MDC-5004

MDC-5204/5240

MDC-5504/5540

4kW / 3 feet Antenna

0.9 m

1.3 m

2.8 m

4kW / 4 feet Antenna

1.0 m

1.4 m

3.1 m

4kW / 6 feet Antenna

1.2 m

1.7 m

3.7 m

MDC-5006/5060

MDC-5206/5260

MDC-5506/5560

MDC-7006/7060

MDC-7906/7960

6kW / 4 feet Antenna

1.5 m

2.1 m

4.5 m

6kW / 6 feet Antenna

1.7 m

2.4 m

5.4 m

MDC-5012/5010

MDC-5212/5210

MDC-5512/5510

MDC-7012/7010

MDC-7912/7910

MDC-7012P

MDC-7912P

12kW / 4 feet Antenna

2.1 m

2.9 m

6.4 m

12kW / 6 feet Antenna

2.4 m

3.4 m

7.6 m

12kW / 9 feet Antenna

2.9 m

4.1 m

9.0 m

MDC-5025/5020

MDC-5225/5220

MDC-5525/5520

MDC-7025/7020

MDC-7925/7920

MDC-7025P

MDC-7925P

25kW / 4 feet Antenna

2.9 m

4.1 m

9.2 m

25kW / 6 feet Antenna

3.5 m

4.9 m

10.9 m

25kW / 9 feet Antenna

4.1 m

5.8 m

13.0 m

Caution

For Your Safe Operation MDC-5000/5200/5500/7000(P)/7900(P) Series

vi 0093855002-00

Do not disassemble or modify. It may lead to trouble, fire, smoking or

electric shock. In case of trouble, contact our dealer or our company.

In case of smoke or fire, switch off the power in the boat and the power of

equipment. It may cause fire, electric shock or damage.

Caution on the remaining high voltage.

A high voltage may remain in the capacitor for several minutes after you

have powered off. Before inspecting inside, wait at least 5 minutes after

powering off or discharging the remaining electricity in an appropriate

manner. Then, start the work.

The information displayed in this unit is not provided directly for your

navigation. For your navigation, be sure to see the specified material.

Use the specified fuse. If un-specified fuse is used, it may cause a fire,

smoke or damage.

MDC-5000/5200/5500/7000(P)/7900(P) Series Break in procedure of stored radar

0093855002-00 vii

Break in procedure of stored radar

Following procedure is recommended for “Break In” of the stored radar.

Otherwise the radar sometimes exhibits unstable transmitting operation

such as arcing at its initial operation after long period of storage and make

the operation more difficult.

1. Extend preheat time as long as possible (preferably 20 to 30

minutes).

2. Set the pulse width to the shortest one and start the operation.

When the operation in the shortest pulse is stable then go to

operation in longer pulse and repeat the similar step until the

operation reaches to the final pulse condition.

Disposal of used cell and this radar MDC-5000/5200/5500/7000(P)/7900(P) Serie

viii 0093855002-00

Disposal of used cells and this radar

Treatment of the used lithium ion cells

To dispose built-in lithium ion battery cells (CR2032) in this radar, insulate each terminal with scotch

tape, etc. and wrap in a plastic bag, etc.

The disposal and collection rules may be different depending on each municipal district. Obey the

directions of each district.

Disposal of this radar

This radar shall be disposed according to the municipal regulations or rules.

A high-energy density lithium ion battery cell is built in this radar.

Improper disposal of the lithium ion battery cell is discouraged as the cell

has possibility of short-circuiting. If it gets wet, generation of heat,

explosion or ignition may occur resulting in injury or fire.

Otros manuales para MDC-5000 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Radar marino de Koden

Koden

Koden MDC-2200 series Manual de usuario

Koden

Koden MDC-5000 Series Manual de usuario

Koden

Koden MDC-2200 series Manual de usuario

Koden

Koden MDC-2900 Manual de usuario

Koden

Koden MDC-900 Series Manual de usuario

Koden

Koden MDC-7900P series Manual de usuario

Koden

Koden MDC-2900 Manual de usuario

Koden

Koden MDC-2240 Manual de usuario

Koden

Koden MDC-900 Series Manual de usuario

Koden

Koden MDC-5204 Manual de usuario

Koden

Koden MDC-2900 Manual de usuario

Koden

Koden MDC-2000BB Series Manual de usuario

Koden

Koden MDC-1810P Manual de usuario

Koden

Koden MDC-5004 Manual de usuario

Koden

Koden MDC-7000P series Manual de usuario

Koden

Koden MDC-5200 SERIES Manual de usuario

Koden

Koden MDC-2900 Manual de usuario

Koden

Koden MDC-2200 series Manual de usuario

Koden

Koden MDC-2000 series Manual de usuario

Koden

Koden MDC-5004 Manual de instalación

Koden

Koden MDC-7006 Manual de usuario

Koden

Koden MDC-7060 Manual de usuario

Koden

Koden MDS-1100R Series Manual de usuario

Koden

Koden MDC-5000 Series Manual de usuario

Manuales populares de Radar marino de otras marcas

Furuno

Furuno 1751 MARK-2 Manual de usuario

RADAC

RADAC WaveGuide 5 Onboard 2 Manual de usuario

JRC

JRC JMA-9922-6XA Manual de usuario

Furuno

Furuno 1931 MARK-2 Manual de usuario

JRC

JRC JMR-9230-S Manual de usuario

Furuno

Furuno FR-2010 Manual de usuario

Furuno

Furuno FAR-3210 Manual de usuario

Furuno

Furuno 1751 Manual de usuario

Furuno

Furuno FCR-902 Manual de usuario

Garmin

Garmin GMR 18 XHD Manual de usuario

Furuno

Furuno FCR-2139S-BB Manual de usuario

Garmin

Garmin GMR 40 Instrucciones de funcionamiento

JRC

JRC JMA-5212-4 Manual de usuario

Simrad

Simrad R5000 Manual de usuario

JRC

JRC JMR-7230-S3 Manual de usuario

Sailor

Sailor SP4400 Manual de usuario

Furuno

Furuno 841 MARK-2 Manual de usuario

JRC

JRC JMA-5312-6 Manual de usuario