Kodak Kodak i1840 Manual de usuario

A-61597 January 2008 i

Contents

Using the High-Resolution Printer Accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Printed Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Configuring your print string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Changing the horizontal print position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Changing the vertical print position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Omit printing on more than one document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Performing a Print test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing a new printer cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Storing the printer cartridge when not in use . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Scanner maintenance guidelines when using the High-Resolution Printer . . . . 14

Replacement procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Replacing ink trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Scanner auto purging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Printer cartridge care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Cleaning the print head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

A-61591 / Part#9E8651 January 2008 1

This guide provides instructions for using the High-Resolution Printer

Accessory / for the Kodak i1800 Series Scanners.

The High-Resolution Printer Accessory provides an effective way to

apply information to the scanned document and use document

management systems such as batching and time-stamping. It also

provides a print capability that is programmed to support alphanumeric

characters as defined by the application software. All print information

is captured in a document header record. All printer controls and

functions are accessible via the ISIS Driver and TWAIN Datasource.

Some features of the High-Resolution Printer Accessory are:

• Prints up to 40 characters per page, front pre-scan only

• Improved print quality

• A choice of red or black printer cartridges

• Auto purge

• Adjustable print contrast (via font selection: 50% Normal; 100% Bold)

Printed information The information printed by the High-Resolution Printer Accessory is

defined by the application software. Up to 40 characters per document

can be printed. Printed information can include:

• Document image address

•Date

•Time

• Document sequential counter

• Custom message text

The same information may be printed on documents of all levels, or

different information may be printed on documents of different levels.

The orientation/rotation, format and style/font can all be selected.

Orientation/Rotation — you can select the orientation of the print

string. Options are 0, 90, 180 or 270 degrees.

Style/Font — the Contrast of the print string can be adjusted. You can

select Normal (50%) or Bold/Large (100%).

Using the High-Resolution Printer Accessory /

for Kodak i1800 Series Scanners

A-61591

Part No. 9E8651

January 2008

2 A-61591 / Part #9E8651 January 2008

Format — select either single- or multi-character printing.

•Single: prints a single vertical line of characters (one character per

horizontal line).

•Multi-character: prints a block of characters using multi-character

printing. Following are examples of multi-character format.

0 rotation 90 rotation 180 rotation 270 rotation

This example shows 40 characters.

Rotation: 0

Up to 40 characters using 6 rows of 6

characters and 1 row of 4

This example shows 36 characters.

Rotation: 90

Up to 36 characters using 3

columns of 12 characters

This example shows 40 characters.

Rotation: 180

Up to 40 characters using 6 rows of 6

characters and 1 row of 4

This example shows 36 characters.

Rotation: 270

Up to 36 characters using 3

columns of 12 characters

A-61591 / Part#9E8651 January 2008 3

Configuring your

print string

Configuring your High-Resolution Printer is done via the TWAIN

Datasource or ISIS Driver. Detailed procedures for configuring print

strings can be found in the Image Processing Guide for Kodak i1800

Series Scanners, A-61580.

NOTE: When using the High-Resolution Printer in a scanner with image

address and patch reading enabled, all patches must be within

2.5 inches of the lead edge.

When using the High-Resolution Printer, you must decide whether to

use single- or multi-character printing.

If your application software uses the TWAIN Datasource, access the

Printer tab to define single- or multi-character printing.

Format — select either Normal (single-character) or Block (multi-

character) format.

4 A-61591 / Part #9E8651 January 2008

If your application software uses the ISIS Driver, access the Printer tab

and select Block or Normal mode.

A-61591 / Part#9E8651 January 2008 5

Changing the

horizontal print

position

The location of the information you want to print on a document is

determined by the print position of the High-Resolution Printer

Accessory within the scanner and the pre-defined print position.

To change the horizontal print position:

1. Remove the output tray.

2. Open the print access cover.

6 A-61591 / Part #9E8651 January 2008

There are 6 horizontal print positions. These positions are visible on

the printer rail.

3. Slide the printer along the print rail until it is in the desired position.

The arrow on the printer cartridge carrier should be aligned with the

desired print position.

4. When finished, close the print access cover and reinstall the output

tray.

Print Positions

A-61591 / Part#9E8651 January 2008 7

Changing the vertical

print position

The Print Test function allows you to print a “ladder” target where each

vertical line is printed by one of the jets in the print head. If a line is

missing, one of the jets is not working. Dabbing the print head with a

Staticide wipe will often open clogged jets.

Omit printing on next

document only

If you need to rescan a document(s) and want to avoid a duplicate print

string on the same document, use the Omit Print option.

You can omit printing on the next document by selecting the Omit Print

option on the scanner touchscreen. You must select Omit Print before

feeding any document that you want to eliminate printing on.

NOTE: This example assumes that the application software has defined

the Omit Print function.

8 A-61591 / Part #9E8651 January 2008

Omit printing on

more than one

document

The Disable Print function allows you to temporarily disable printing on

all documents in a batch. This may be useful if rescanning a stack of

documents that have already been printed.

The Disable Print function is only available after the scanner is enabled

(scanning started from the host PC). If you want to disable printing for

the first document in the batch, then your host software should be set

up to NOT automatically start scanning.

The Disable Print button is only available if printing has been enabled

by the scanning application. Once Disable Print is turned on, no

documents will be printed on until one of the following occurs:

•Disable Print is turned off, or

• the scanner is disabled because there are no more documents to

scan (End Job) or a multifeed occurs and the scanner is set up via

the Stop Scanning option on jam.

Otros manuales para Kodak i1840

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escáner de Kodak

Kodak

Kodak INNOVATION I100 Manual de usuario

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i3000 Series Manual de usuario

Kodak

Kodak Scan station Pro 550 Manual de usuario

Kodak

Kodak DirectView CR 500 System Manual de usuario

Kodak

Kodak I780 - Document Scanner Manual de usuario

Kodak

Kodak I810 - Scanner Firmware - PC Manual técnico

Kodak

Kodak A3 Manual de usuario

Kodak

Kodak 2400 DV Plus Manual de usuario

Kodak

Kodak Truper 3210 Manual de usuario

Kodak

Kodak i1800 Series Manual de usuario

Kodak

Kodak i55 Manual de usuario

Kodak

Kodak S2000 Series Manual de usuario

Kodak

Kodak i24x0 Manual de usuario

Kodak

Kodak Scan Station 500 Manual de usuario

Kodak

Kodak PROFESSIONAL RFS 3600 Manual de usuario

Kodak

Kodak Scanmate i1120 Instrucciones de uso

Kodak

Kodak I1310 - Document Scanner Manual de usuario

Kodak

Kodak i1400 Series Manual de usuario

Kodak

Kodak Scanmate i920 Manual de usuario

Kodak

Kodak i100 Series Manual de usuario

Kodak

Kodak S2000f Series Manual de usuario

Kodak

Kodak i1220 Plus Manual

Kodak

Kodak i800 Series Manual de usuario

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

Fujitsu

Fujitsu FI-4860C2 Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Revopoint

Revopoint POP Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Fujitsu

Fujitsu CardMinder Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario

Innova

Innova 5210 Manual de usuario

Visioneer

Visioneer CardReader 100 Guía de inicio rápido