KOCOM KIP-612ML Manual de instrucciones
Thank you very much
for purchasing KOCOM
multiple interphone.
Please read this manual
thoroughly to ensure
correct usage, before
operating.
MULTIPLE INTERPHONE
KIP-612ML User’s Manual for Operation and Installation
KIP-612ML
PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY ADDRESS
◉KOCOM Warranties the original purchaser of this product as follows.
1) Thisproduct isproduced under strict quality control and inspection procedures.
2) If thisproduct breaksdown during proper use asa result of product defect,
KOCOM will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
a. Breakdown during transport, or through careless treatment, by consumer.
b. Breakdown cause by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
Warranty
Warranty Card
KIP-612ML M0927
To receive after-Sales service, have the following ready
when you contact our branches.
1. Name of the product.
2. Model number of the product.
3. The area of problem.
4. Phone number and address at which you can be contacted.
This manual is based on the date as shown in the right and specifications
are subject to change without notice for quality improvement.
■ Dual Communication
■ Power : DC 24V (Common)
■ Distance of Communication : 300M,
In Use 0.8Φ - 1Km
KIP-300
(SUB)
W1031
KIP-300LM216-PIK
Product Specification
Wiring Diagram
How to Operate (Instruction for Operating)
Name of Each Part
How to Installation
♪
♬
POWER : DC 24V(1.2A)
POWER CONSUMPTION : 0.85W (UN LOAD)
1.7W (IN LOAD)
Wiring : 2 wires (Non polarity)
Max. communication distance : TIV 0.8 (2Km)
Gentle electronic sound
COMPOSITION
- INTERPHONE MASTER (KIP-612ML)
- ADAPTOR (APO-2420
※
Option)
- INTERPHONE SUB (KIP-300)
Precautions for Wiring
As incorrect wiring may cause the device’s non-operation or poor communication quality,
please carefully conduct wiring work.
When connecting a wiring chord to a terminal, loosen screw, insert the end of the chord into
the bottom part of screw, and tighten the screw.
When fixing wiring chord, use stapler not to cause damage to the chord.
When using existing wiring, please be cautious not to cause disconnection and short-circuit.
Handset
Call Button
Special function button
(Volume)
※Special function button : This button is volume button for adjust ring sound (UP/DOWN).
※Installation way of master & Sub are same.
·
Place bracket on the wall and fix it with screws. After wiring, fit the rear side of main frame
to a groove in the bracket and pull the main frame down to fix.
·
Avoid connection after wiring.
Making Call Call from Master
·
Pick up handset of master
and push a button which
you want.
·
Speaker outputs tone
sound “Ding-Dong”
·
To communication, please picking up handset.
·
Hang up handset, communication is ended.
WALL
4X25mm
Screw
■
Sub Sub Sub Sub
·
·
·
·
Otros manuales de Sistema de intercomunicación de KOCOM
KOCOM
KOCOM KHV-446S Manual de usuario
KOCOM
KOCOM KDP-601A Manual de instrucciones
KOCOM
KOCOM DP-203HA Guía
KOCOM
KOCOM KIP-120 Manual de instrucciones
KOCOM
KOCOM KCV-301 Manual
KOCOM
KOCOM KAL-S302 Manual de usuario
KOCOM
KOCOM KCV-544 Manual
KOCOM
KOCOM KVM-514GS Manual
KOCOM
KOCOM KVL-C302i Manual de usuario
KOCOM
KOCOM KIP-501PM Manual de instrucciones
KOCOM
KOCOM KIP-605PG Manual de instrucciones
KOCOM
KOCOM KLP-100 Manual de instrucciones
KOCOM
KOCOM KIP-300 Manual de usuario
KOCOM
KOCOM KC-C60 Manual de usuario
KOCOM
KOCOM KC-C60 Manual
KOCOM
KOCOM KVM-340 Manual de usuario
KOCOM
KOCOM KLPD410 Manual de instrucciones
KOCOM
KOCOM KCV-D801R Manual
KOCOM
KOCOM KDP-601A Manual de usuario
KOCOM
KOCOM KVM-624 Manual
