Klever Q-Powe Manual de usuario
Klever Q-Power
User manual
Inhalt
1. Quick Start .......................................................................................................................................................... 3
2. Introducon ........................................................................................................................................................ 7
3. EC Declaraon of Conformity CE ........................................................................................................................ 9
4. Start-up and safety check ................................................................................................................................. 10
5. Behavior in road trac ..................................................................................................................................... 12
6. The Klever Mobility propulsion system - Biactron ............................................................................................ 13
6.1. Sensors and funconality ......................................................................................................................... 14
6.2 Support levels ............................................................................................................................................ 15
6.3 Display/User interface ............................................................................................................................... 16
6.3.1 Funcon of each buon: ................................................................................................................ 17
6.3.2 Display Content .............................................................................................................................. 21
6.3.3 Sengs menu................................................................................................................................. 23
6.3.4 Assembly and disassembly of the display ...................................................................................... 27
6.4 Baery ....................................................................................................................................................... 28
6.4.1 Charging the baery....................................................................................................................... 31
6.4.2 Range.............................................................................................................................................. 33
6.4.3 Disassembly and assembly of the baery ...................................................................................... 34
6.4.4 Transport of the baery ................................................................................................................. 35
6.5 Troubleshoong ......................................................................................................................................... 35
7. The bicycle ........................................................................................................................................................ 36
7.1 Saddle and handlebar adjustment ............................................................................................................. 36
7.1.1 Folding the handlebar down ......................................................................................................... 38
7.2 Headset ..................................................................................................................................................... 38
7.3 Suspension fork ......................................................................................................................................... 40
7.4 Brakes ........................................................................................................................................................ 40
7.5 Drive and gearshi .................................................................................................................................... 42
7.6 Lighng ...................................................................................................................................................... 44
7.7 Wheels and res ........................................................................................................................................ 45
7.8 Child seat ................................................................................................................................................... 49
7.9 Lock and an-the system ........................................................................................................................ 49
7.10 Accessories .............................................................................................................................................. 49
7.11 Bicycle trailer ........................................................................................................................................... 50
8. Transport of the Pedelec .................................................................................................................................. 50
9. Maintenance, Care and Storage ....................................................................................................................... 51
10. Dsiposal and transport of the baery ............................................................................................................ 53
12. Liability for material defects and warranty ..................................................................................................... 59
13. Intended use ................................................................................................................................................... 61
14. Wear ............................................................................................................................................................... 62
15. Legal requirements for parcipaon in trac ................................................................................................ 63
16. FAQs ................................................................................................................................................................ 64
17. Imprint ............................................................................................................................................................ 66
18. Bicycle Passport .............................................................................................................................................. 67
19. Regular inspecons and plan .......................................................................................................................... 68
CONTENT
3
QUICK START
1. Quick Start
Dear Customer,
the rst pages of this comprehensive instrucon booklet
provide a brief guide to help you get an overview of the
main funcons of your new pedelec.
For further quesons, please read the operang instrucons
on the following pages. There you will nd appropriate in-
formaon on all important technical quesons and details. If
you have any further quesons, please ask one of our autho-
rized dealers or contact our technical hotline. Our contact
details can be found at the end of this manual.
The team of Klever Mobility wishes you to have fun with
your new Pedelec.
Image 2
4
QUICK START
No bar (Display on) UL (Ultra
Low)
least support; Sys-
tem is acve
One bar L (Low) low support
Two bars M (Medium) medium support
Three bars H (High) high Support
Push of the TURBO buon while pedaling (can be applied in any level) T (Ultra High) strongest support
Push of the TURBO buon at standsll > 4 km/h start and push assist
The start and push assist can only be used at standsll (up to 4 km/h)
Safety check:
Before you start riding, please always check the funcon of the
brakes and the pressure of the res of your bicycle.
Starng the electric drive
To start, the display must be aached to the seat. There are
two ways to acvate the system:
1. Press and hold the start buon for 1 second (Image 3) -
the system runs a system check for 3 sec - now the system is
acvated
or
2. You drive o with the bike and the automac start is acva-
ted. There is a system check for 3 seconds and the system is
ready.
Use the + (top le) and - (boom le) buons to select the
desired level of support. The support level is indicated by the
luminous beam in front of the leer H; M and L.
The auto-start only works when the system was switched o
for at least 30 sec before. (see chapter 6.3, page 16)
Image 3
5
QUICK START
Charging the baery:
Warning! The baery must only be charged with
the appropriate, provided charger (Image 4)
The baery can be charged both on the bike (Image 7a) or
separately (image 7b) (to take out the baery, see chapter
6.4.3.).
Connect the power cord to the charger rst, then the power
cord into a wall socket. When the LED on the charger lights up
steady red, the device is ready for use (Image 6).
Now connect the charging plug of the charger to the charging
port of the baery (Fig 5 + 6 + 7 / 7b).
The charging process starts automacally. Once the LED shows
a steady green light, the charger stops and the baery is
charged.
Now rst pull the power plug from the wall socket and remove
the charging plug from the baery aerwards.
Charging
status
Charging indicator (LED)
Charger
Charging indicator
(LED) Baery
Remark
Flashing red Error, check connecons
Steady red Charger is ready
0% Flashing yellow Flashing red Capacity is very low, charging starts
<35% Steady yellow Flashing red Normal charging
35 – 75% Steady yellow Flashing yellow Normal charging
75 – 90% Steady yellow Flashing green Normal charging
>90% Flashing green Flashing green Final charging
100 % Steady greenq LED o Baery is fully charged
Charging me of an empty baery takes about four hours (0-96%) (0-100%= 6 hours).
Image 4
Image 5
Image 6
Image 7b
Image 7a
Power cable Charger Power Plug
Charging port
LED
6
7
INTRODUCTION
2. Introducon
Congratulaon
By purchasing this pedelec of Klever Mobility you have made
the right decision and obtained a high quality product with
which you will have lots of joy in your everyday life.
Technically and funconally to date, it is made using the high-
est quality materials and components. Excellent design and an
excellent price-performance rao disnguish this bike.
To have permanent driving pleasure with the new bike, please
read these instrucons carefully.
Everything you need to know about technical data, operaon,
maintenance and care, is carefully collected in this guide for
your informaon.
Please also refer to the informaon in the accompanying inst-
rucons of individual components.
Please note especially the bolded porons which are also
marked with a „warning“. The most important informaon
are briey summarized and you should denitely pay aen-
on to avoid any accidents and danger to life and health.
Bold secons with this symbol and with the word „Cauon“
contain informaon about this bike, its accessories and its
handling, which we want to make you pay parcular aen-
on.
Described work which is indicated by this sign should be
carried out by a specialist dealer. They require experience
and special tools.
Furthermore, if you sll need informaon or advice, please
contact our technical hotline under 02234 933420 (Mon-Fri
8-17 clock) or an authorized Klever Mobility dealer.
The latest informaon about our products with addional
technical informaon and videos can also be found on our
website: www.klever-mobility.com.
8
INTRODUCTION
Your bike is equipped according to the German StVZO, and
you can thus parcipate safely on public roads. It features a
bright-sounding bell, a complete lighng system with ocial
marks on the headlight, taillight and pedal reectors and two
independently funconing brakes on front and rear.
The addional electric drive is controlled from 25 km / h to 0
and thus meets the legal requirements for a bicycle. Through
this limitaon of support to 25km / h, you are exempt from
compulsory insurance and do not require a driving license nor
insurance plate.
Also there is no helmet law for you. But we recommend to
wear a helmet every me you ride.
Have fun and ride always safe,
your team of Klever Mobility.
9
EC DELCARATION OF CONFORMITY
3. EC Declaraon of Conformity CE
The manufacturer:
Klever Mobility Inc.
No. 8, Ln.76, Sec.3, Zhongyang Rd.,
Tucheng Dist.; New Taipei City 236
Taiwan
Represented by:
Klever Mobility Europe GmbH
Dieselstr. 6
D-50859 Köln
www.klever-mobility.com
Tel.: +49 2234 93342 0
info@klever-mobility.com
conrms herewith that the following product:
Q-Power Modelyear 2016
Complies with all relevant provisions of direcve: 2006/42/EC
Mashinery.
Similarly, the machinery all provisions of Direcve: 2004/108/
EC Electromagnec Compability
The following harmonized standards were applied: DIN EN
15194 Bicycles-motorized support Bicycles-EPAC bicycles
DIN-EN-ISO 4210 City bicycles: safety requirements and test
methods
Technical Documentaon:
Klever Mobility Europe GmbH
Dieselstr. 6 Basan Petri
D-50859 Köln
10
GETTING STARTED
4. Start-up and safety check
During the assembly and in the nal nal inspecon by the
dealer your bike was subjected to an intensive control. How-
ever, transport and or prolonged non-use of the bicycle may
result in changes in the funcon.
So before you set o for the rst me and before each further
ride, you should consider some important things and check
the bike shortly.
1. Before you use the bike for the rst me, make yourself in-
tensely familiar with the pedelec and the modes of operaon
of the electric drive before you parcipate in public trac.
2. Verify the correct seng of saddle and handlebars (see
secon 7.1. Saddle and handlebar adjustment)
3. Check the correct funcon of the brake
4. Check the correct air pressure and tread depth of res
5. Check the lighng system for proper operaon
6. Check the bolted joints and the ghtness of the wheels.
7. Check the minimum inseron seatpost
Warning! If the bike shows defects in one of these points,
under no circumstances should you ride the bike. A faulty
bicycle may result in serious accidents and endanger your
live. If in doubt, contact your dealer or contact us.
Warning! Like all mechanical parts, the bicycle is subject to
high loads and wear. Dierent materials and components re-
act dierently to wear and connuous load. If the expected
life of a component is exceeded, it can suddenly fail, causing
the injuries to the rider. Any form of cracks, scratches or
stains on heavily loaded parts suggest that the life of the
component has been reached and that it has to be replaced.
Tabla de contenidos
Otros manuales de Scooter de Klever
