Kleton MJ525 Manual de usuario

Instruction Manual

MJ525

Mobile Hydraulic Scissor Lift Table

2200 lbs. (1000 kg)

WARNING!

Read this operation manual carefully and understand fully the

operating instructions. Improper use of this unit could result in injury.

• DO NOT put foot or hand in scissor mechanism.

• Keep neighbouring persons away from the unit when in use.

• DO NOT stand in front or behind of lift table when it is in use.

• DO NOT crawl under the table.

• DO NOT put foot in front of rolling wheels.

• DO NOT use lift table on slope or inclined surfaces.

• DO NOT lift or ride people on this unit.

CAUTION!

• DO NOT move this unit when lifting or lowering the bed or when the bed is in an elevated

position. (Bed must be lowered when the unit is running)

• DO NOT use this table for any purpose other than it’s intended use and do not load with more

than the rated capacity.

• DO NOT allow persons to operate this table without complete understanding of its operation.

• DO NOT lower the bed too quickly.

• During loading/unloading operation, do not release the parking brake.

• Load should be distributed on at least 80% of the table area. Stop operation of lift table if load

becomes too unstable, do not place objects protruding off edge of the bed.

• DO NOT modify lift table without manufacturers written consent.

Daily Inspection

Daily inspection of this unit is critical in order to locate any malfunction or fault.

Check the following daily before operating your lift table.

1. Check for bending or cracking of the lift table.

2. Check for any oil leakage from the cylinder.

3. Check for vertical creep of the table.

4. Check for smooth movement of the wheels.

5. Ensure that brakes are fully functional.

6. Ensure that all nuts and bolts are rmly tightened.

Assembly method

The lift table is packed in a cardboard box. Assembling of the jack up handle and pedal is required.

WARNING: Assembly work must be done on a at surface; wheels must be choked to prevent

accidental rolling of the unit.

1. Remove nuts and spring washers from the end of handle and insert the handle into the holes on

frame. Tighten the handle using removed nuts and washers with the largest hex key supplied

in the box.

2. Insert the jack pedal into the pedal pipe and position the tapered side pedal end to right. Tighten

the jack pedal using the removed nut and washer with the smallest hex key supplied in the box.

OPERATING THE LIFT TABLE

Lifting the Table

To lift the table, press the lifting pedal several times until the table reaches the desired height. The table

lowers slightly after reaching the highest position. Maximum Capacity of this table is 2200 lbs. (1000 kg)

WARNING: Do not overload lift table, stay within the rated capacity.

Do not load the table on sides or ends only. Load must be distributed on at least 80% of table area.

Lowering the Table

WARNING: DO NOT put foot or hand in scissor mechanism. The rotating knob lowers the table.

NOTE: The hydraulic cylinder is designed to hold table. As is the nature of the hydraulic system, table

lowers very slowly over an extended period of time. Please note that the table does not stay at the same

height indenitely.

Speciﬁcations

Model Capacity Table Table Height Foot Pedal Strokes

to Elevate Wheel Weight

MJ525 1000 kg.

2200 lbs.

2035 x 750 mm

80.1" x 29.5"

300-1360 mm

11.8" x 53.5" 200 127 mm

198 kg.

436 lbs.

Service Instructions

Change hydraulic oil every 12 months

Lubricate the following areas every month: Fitting of Cylinder/oil, Roller Friction Surface/grease,

Link Pin/oil, Pedal Fitting Point/oil, Grease Nipple/grease

Troubleshooting

If the table does not lift when pressing lifting pedal several times:

• Adjust the control valve located on

the hydraulic cylinder (A) by releasing

the set screw and locking nut (B) using a

at screwdriver and a 14mm wrench.

• Test the control lever and lifting pedal.

A B

Part

No.

Order

No. Description Qty

1 Table 1

2 Screw 1

3Fork Arm 1

4Roller of Table 2

5 Locking Ring 4

6 MK467 Pump Unit 1

10 Bolt 4

11 Bolt 2

12 Elastic Washer 2

13 Cover 2

14 MK472 Bearing 2

15 MK473 Bearing 2

Part

No.

Order

No. Description Qty

16 Frame of Univ. Wheel 2

17 Shaft of Wheel 2

18 Washer 4

19 MK477 Bearing 8

20 MK478 Wheel 2

21 Frame 1

22 Screw 2

23 Plate 2

24 Pin 2

25 Roller 2

26 Axle 1

27 Shaft

Part

No.

Order

No. Description Qty

28 Elastic Pin 1

29 Handle 1

30 Elastic Washer 4

31 Shaft 1

32 MK490 Big Wheel 2

33 Locking Washer 2

34 Nut 2

35 Dust Cover 2

36 Nut 4

37 Control Handle 1

A MN691 Front Wheel Assembly 2

B MN690 Steer Wheel Assembly 2

LIFT TABLE PARTS LIST

B A

Part

No.

Order

No. Description Qty.

B101 MK496 Dust Ring 1

B102 Screw Cover 1

B103 MK498 O-Ring 1

B104 Sleeve 1

B105 MK500 O-Ring 1

B106 Big Piston Rod 1

B107 MK502 O-Ring 2

B108 Piston 1

B109 O-Ring 1

B110 MK505 Y-Ring 1

B111 Washer 1

B112 Locking Ring 1

B113 Safety Valve Spindle 1

B114 Spring 1

B115 Adjusting Screw 1

B116 MK511 Seal Washer 1

B117 Screw 1

B118 Screw 1

Part

No.

Order

No. Description Qty.

B119 Seal Washer 1

B120 Body of Pump 1

B121 Screw 1

B122 Seal Washer 1

B123 Spring 1

B124 Valve Spindle of Pump 1

B125 Spring 1

B126 Release Valve Pin 1

B127 MK522 O-Ring 1

B128 Sleeve of Valve 1

B129 MK524 O-Ring 1

B130 Elastic Pin 1

B131 MK526 Lever Plate 1

B132 MK527 Nut 1

B133 MK528 Screw 1

B134 MK529 Seal Washer 1

B135 MK530 O-Ring 1

B136 Post 1

Part

No.

Order

No. Description Qty.

B137 Steel Ball 1

B138 Body of Valve 1

B139 Steel Ball 1

B140 Cylinder 1

B141 MJ702 O-Ring 1

B142 MJ701 Y-Ring 1

B143 Piston Rod 1

B144 Spring 1

B145 Cap of Spring 1

B146 Locking Ring 2

B147 Pedal 1

B148 Shaft 1

B149 Shaft 1

B150 Elastic Pin 1

HYDRAULIC CYLINDER PARTS LIST

Tabla de contenidos

Otros manuales de Sistema de elevación de Kleton

Kleton

Kleton MP009 Manual de usuario

Kleton

Kleton MJ526 Manual de usuario

Kleton

Kleton MP007 Manual de usuario

Kleton

Kleton MP005 Manual de usuario

Kleton

Kleton MJ523 Manual de usuario

Kleton

Kleton MJ521 Manual de usuario

Kleton

Kleton MJ520 Manual de usuario

Kleton

Kleton MP006 Manual de usuario

Kleton

Kleton MP008 Manual de usuario

Kleton

Kleton MP012 Manual de usuario

Kleton

Kleton MP010 Manual de usuario

Manuales populares de Sistema de elevación de otras marcas

morse

morse 82H-124 Manual de usuario

Braun

Braun NL955 Series Manual de usuario

haacon

haacon 1889.10 Manual de usuario

Protekt

Protekt AT 252 Manual de usuario

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manual de usuario

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manual de usuario

Genie

Genie Z-60/34 Manual de usuario

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manual de usuario

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manual de usuario

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manual de programación

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manual de programación

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manual de programación

BERG

BERG BeNomic EasyLeaf Manual de usuario

Powermate

Powermate LiftGate LG-3 Manual de usuario

Snorkel

Snorkel TM12 Series Manual de usuario

Terberg

Terberg OMNIDEKA Manual de usuario

Harmar Mobility

Harmar Mobility AL625 Instrucciones de funcionamiento

Rotary

Rotary SPO16 Manual de usuario