Klemsan Klecard Manual de usuario
User Guide
Thank you for purchasing the Klecard Thermal Transfer Printing System.
Klecard is the perfect all-in-one solution for producing professional looking
electrical marking labels. A wide variety of products are available
in our range, suitable to mark terminals, cables, wires, push buttons and
any other component inside and outside the cabinets.
Operation is simple and fast once a job has been created with our
dedicated labeling software Klemark Pro.
To begin using your Klecard, please read this manual carefully.
This User Guide is a complete step-by-step guide to quickly and easily create
all your markers with your new printer.
Dear customer
2
User Guide
Klemsan reserves the right to make improvements to the
equipment and software described in this document at
any time without any prior notice. Klemsan reserves the
right to revise this publication and to make changes
from time to time in the content hereof without obligation
of Klemsan to notify any person or organization of such
revisions or changes.
This document may contain links to web sites that
were current at the time of publication, but may have
moved or become inactive since. This document may
contain links to sites on the Internet that are owned
and operated by third parties.
Klemsan is not responsible for the content of any such
third-party site.
Corporate Headquarters:
Service Address:
© 2019, Klemsan
Trademark Acknowledgments:
Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
3
User Guide
KIZILÜZÜM MAHALLESİ KEMALPAŞA
KIZILÜZÜM CADDESİ NO:15
35730 KEMALPAŞA İZMİR/TURKIYE
T: +90 (232) 877 08 00
F: +90 (232) 877 08 06
www.klemsan.com.tr
KIZILÜZÜM MAHALLESİ KEMALPAŞA
KIZILÜZÜM CADDESİ NO:15
35730 KEMALPAŞA İZMİR/TURKIYE
T: +90 (232) 877 08 00
F: +90 (232) 877 08 06
www.klemsan.com.tr
Support information
Important!
Register your Klecard printer online.
When you contact Klecard Support Services,
please provide:
• Unit serial number and software version.
• Functional and technical description of the problem.
• Exact error message shown on the display
4
User Guide
5
User Guide
Contents
Klecard specifications
Unpacking and inspection
Choosing a good location
Introduction to Klecard
Identify the parts of the printer
Human interface
Control panel
Back of the printer
Sensors of the Klecard
Operate the Klecard printer
Powering the printer
Loading the plates and the media
Setting the intensity
Setting the ribbon sensor
Maintain the Klecard
Changing the ribbon
Troubleshooting
Safety information
Warranty
6
7
7
8
9
9
10
11
12
13
14
15-16
17
18
19-20
21-23
24-25
26-27
28
...................................................................................
...................................................................................
...................................................................................
....................................................................................
..................................................................................
.
...................................................................................
....................................................................................
....................................................................................
...................................................................................
....................................................................................
....................................................................................
....................................................................................
....................................................................................
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..............................................................................
Quality
Technology
300 x 600 dpi
Thermal transfer
Up to 1 inch per second
+5°C +57°C
30% to 85% without condensation
105 mm
105 x 140 mm max
USB 2.0
100-240 VAC
300 mt resin ribbon
CE
CEI 16-7, EN 60950-1, EN 61010-1, EN 60464-2
393 (l) x 230 (w) x 244 (h) mm
10,0 Kg
Windows 7, Windows 8, Windows 10
Bitmaps, barcodes, vectors and text
Ribbon saving algorithm
Bulit-in printhead monitoring
Automatic printhead temperature detection
Built-in diagnostic tests
2 button, 2 x 16-digit LCD Display
Speed
Temperature*
Relative humidity
Printable width
Printable area
Connection
Voltage
Ink
Certification
Print resistance
Dimensions
Weight
Driver
Graphics
Other
Human interface
Specifications
6
User Guide
*See page 12 for recommended conditions
Choosing a Good Location
Place the Klecard in a location with adequate air circulation to prevent internal heat build up.
You will need at least 20 cm of front space to fully open the tray.
Do not place the Klecard near heat sources such as radiators or air ducts, or in a place subject
to direct sunlight, excessive dust, mechanical vibration or shock.
Due to the low noise emitted during operations, Klecard can be placed in your workshop and
on your desk in the office as well.
While unpacking your Klecard, inspect the carton to ensure that no damage has occurred during
shipping. Make sure that all supplied accessories are included with your unit.
The following items should be included:
• Klecard printer
• Resin black ribbon
• Cardboard core for ribbon (2x) (one installed)
• Plate for terminal block tags
• Plate for cable markers
• Plate for flat media
• Power supply
• Power cord
• USB Cable
• CD with User Guide
Save the carton and packing materials. They will come in handy later if you ever need to
transport the Klecard and/or any of its parts and accessories.
Unpacking and Inspection.
7
User Guide
After connecting the Klecard (see page 13)
you will find already installed the following
parts:
• Black resin ribbon
• Cardboard core
• Plate for terminal block marker cards
Additionally, one terminal block marker card already
printed is placed on the plate.
This card shows the factory test made during the production of the Klecard.
Introduction to Klecard
This manual provides the information needed to set up, install, and operate the Klecard
printer and to identify the parts.
Operating system requirements
The Klecard is compatible with Windows 7, Windows 8 and Windows 10 OS.
It requires one USB port on your computer.
Media requirements
You must use genuine cards from Klemsan that are made with materials which have
a surface designed for thermal printing.
Plate for media
Klecard can operate only with its original positioning plates, where you can allocate
the different kind of products.
Ribbons
The Klecard printer requires ribbons designed specifically for use with the printer.
The payout ribbon core and the take up ribbon core are made with special notches
for an easy insertion on the rollers.
The ribbon are made in premium resin quality, for the best printing output on the
consumables offered by the Klemsan range.
Software
Klecard can work with Klemark Pro software. The user’s manual for the label design
software is available on www.klemsan.com.tr
8
User Guide
Identify the parts of the printer
Human interface
A serial 2x16 character LCD display is present on the Klecard. The on/off push button is
used to power the printer. The Klecard has a Level VI efficiency power supply so that the
unit consumes virtually no power when off and it is energy star compliant.
A separate Operator button is used to control the tray and to access factory tests.
This button is working with the LED under firmware control; this LED is illuminated when
the tray-media sensor is detecting media.
9
User Guide
Centering pin
Front ribbon guides
Operator button
LED
ON-OFF button
Display
Drawer
Clamping Pins
Supply Roller
Take-up Roller
Operator button
LED indicator
The LED reflects conditions of the Klecard.
This button opens and closes the printer tray. With this button it is possible to make some other
choices.
When you need to stop the printing session, you can press the Operator button and the job is
deleted.
When you need to check the printhead status, by pressing the button you access to the TPH
integrity test.
Control panel
10
User Guide
Printer OFF
Printer Ready
Media is placed
on the plate
The LED
is illuminated
Printer ON
No plate on the tray
Printer
is operating
and prints
your job
Exemple
of error
status
Printer ON
Plate on the tray
but no media
placed
Otros manuales para Klecard
1
Tabla de contenidos
Manuales populares de Caja registradora de otras marcas
Sharp
Sharp XE-A137-WH Operation Manual rápido
Sharp
Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo... Manual de usuario
TEC
TEC TEC MA-1060 Manual de usuario
Casio
Casio PCR-408 Instrucciones de montaje
ELCOM
ELCOM Euro-2100TE Manual de usuario
American Changer
American Changer CLASSIC Series Manual de usuario