KIRI Innovation Phiz Manual de usuario
Phiz 3D Scanner
User Manual
Thank you for purchasing and using the Phiz 3D Scanner developed by KIRI Innovation.
Phiz 3D Scanner is a unique 3D scanner that works in conjunction with your smartphone.
After downloading the Phiz App, Phiz 3D Scanner can be connected to your smartphone
wirelessly. Then you can enjoy the high-precision 3D scan right on your smartphone.
Since the beginning of this project, we have been putting a lot of thoughts (and fights, if
necessary) into the intuitiveness. We hope you like the user experiences that we are trying to
bring to you and that we will be continuously improving this product to make it more
awesome.
KIRI Innovation has the best team on earth! We started with two passionate individuals
and now have grown to be the place of choice for the PhDs and smart a**es across top
colleges in the world.
The Phiz 3D Scanner was first introduced as a Kickstarter project, it was brought to life by
908 innovation early adopters. They took huge risks of being scammed by “just another
Kickstarter project” and backed us anyways. We cannot thank them enough for their bravery
because KIRI Innovation would’ve probably been dead if they gave up on us.
Page 1
Page 2
Phiz, what’s it good for?
1. Scanning Object
The Phiz 3D Scanner can provide better results when scanning solid cylindrical, non-
transparent objects. Objects with over-hangs, hollowed parts and high-reflectivity are usually
not good for the Phiz 3D Scanner.
3. Scanning Range
The best practice is to keep the Phiz Turntable as close to the Phiz Beacon as possible, while
having the entire scanned object appeared in the preview window.
Perfect Too Far
2. Phone Position
When inserting the smartphone into the Phiz Beacon, make sure the phone is placed in the
proper position.
Page 3
4. About the Magic Mark
The Magic Mark on the center of the Phiz Turntable contains one of KIRI Innovation’s key
technologies. When positioning the Phiz Turntable, the Magic Mark should always be entirely
included in the camera screen.
5. About the Object / Turntable Position
Due to the specialty of the Phiz’s algorithm, you may find it difficult to position the object and
the Phiz Turntable to the camera center. This may look like the following:
Completely
OK
The object and the turntable are
in the right side of the camera
screen. You may expect them to
be more in the camera center.
But this position is completely ok.
In fact, it is the optimized position
for scanning.
Page 4
6. The Surrounding Environment
Although we are putting user experience as our top priority, we still cannot make sure the surrounding environment would do zero
influence on the scan results. Thus, the following suggestions would potentially help you improve the scan results:
•Make sure there’s no moving object in the background throughout the scanning process
•It is recommended to place the Phiz Turntable at least 1 ft. (30cm) away from its background
•Try not to distance the Phiz Beacon and the Turntable more than 1.3 ft away, or the wireless
communication may be interrupted
•Do not 3D scan under direct sunshine, it could make the result very bad
•Do not shake/move the Phiz 3D Scanner or the scanning object during the 3D scanning process
Page 5
Safety Instructions
For the safe use of the Phiz 3D Scanner, please read the following instructions carefully.
⚠If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
⚠
Warning
a. This device is categorized into a Class III laser product. DO NOT stare at laser directly or
shine at others or it will cause damage to eyes.
b. This product is in accordance with strict standards and regulations through the
development and manufacturing, but still can’t entirely exclude the possibility of
interference to other devices, may cause discomfort to human and animals.
c. Please DO NOT use this product under an explosive or corrosive environment.
d. Please DO NOT use this product near medical devices.
e. Please DO NOT use this product on the airplane.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the device.
Page 6
1.Disposal
Everyone is responsible for environmental protection. It is prohibited to dispose of used
batteries together with household waste, please collect used batteries to the designated
waste station. This product must not be recycled with household waste. Dispose of the
product appropriately in accordance with the national regulations in your country.
2. Scope of Responsibility
KIRI Innovation and its associated manufacturers will not be responsible for the damages
caused by improper use stated below:
-Using the product without instruction;
-Use of accessories from other manufacturers without approval from KIRI Innovation;
-Carrying out modification or conversion of the product.
⚠Warning
Do not use aggressive cleaning agents or solutions. Use only a clean, soft cloth for cleaning.
Page 7
Product Description
Phiz 3D Scanner is used for digitizing real-world objects into 3D models. It works in
conjunction with your smartphone. The following instruction will show you how to use Phiz
3D Scanner and create stunning 3D models.
1. Phiz Beacon
Phiz Beacon is one of the two parts included in the Phiz 3D Scanner. Phiz Beacon is used to
hold the smartphone in place. It emits a line of laser to the object for the smartphone to
compute the 3D coordinated of the object. The top part of the Phiz Beacon is integrated with
Phiz Lighting System
Power Button:
Hold the power button for 5 seconds to turn on/off
the Phiz Beacon.
Lifting Button:
Hold the lifting button, the top of the Phiz Beacon will go up for you
to put in the smartphone. Hold the button one more time the top
will retract and will stop when it holds the smartphone in place.
LED Ring:
When the power is on, the LED ring will light
up.
Page 8
Laser Focusing Wheel:
You can adjust the laser thickness by rotating the focusing wheel.
When scanning, you want to make the laser line on the object as thin
as possible.
Laser Emitter:
⚠This is the part that emits the green laser line. Please
do not stare at it directly or shine at others.
Fill Light:
Phiz Smart Lighting System will control this bar of fill light to make
the object brighter if the ambient light is too low.
Page 9
2. Phiz Turntable
Phiz Turntable is one of the two parts included in the Phiz 3D Scanner. Phiz Turntable is used
to rotate the scanned object controlled by the Phiz App on the smartphone.
LED Ring:
When the power is on, the LED ring will light up.
Power Button:
Hold the power button for 5 seconds to turn on/off the Phiz Turntable.
The Magic Mark:
This is the magic mark that makes any smartphone, no matter the size, work seamlessly with Phiz 3D Scanner.
Keep it clean at all time.
Page 10
Tabla de contenidos
