Kino Flo Diva-Lite 200 Manual de instalación

Operation Manual

Diva-Lite

400 / 200

Part No. 3100024 Rev D 01-07-2008

GFR-D4…………. Diva-Lite 400 Gel Frame

(Included)

GFR-D2…….…… Diva-Lite 200 Gel Frame

(Included)

LVR-D4-S ….. Diva-Lite 400 Louver / Silver

(Included)

LVR-D2-S…… Diva-Lite 200 Louver / Silver

(Included)

DIV-400-120……..Diva-Lite 400, 120VAC

DIV-400-230……..Diva-Lite 400, 230VAC

DIV-400-120U….. Diva-Lite 400, 120U

Universal Voltage

DIV-400-230U….. Diva-Lite 400, 230U

Universal Voltage

DIV-200-120……..Diva-Lite 200, 120VAC

DIV-200-230……..Diva-Lite 200, 230VAC

MTP-LB ……..Lollipop w/Baby Receiver

(Included)

KIT-D4-120

Diva-Lite 400 Kit, 120VAC

w/ Travel Case

KIT-D4-230

Same as above for 230 voltage

Kit Contents:

1 Diva-Lite 400 1 Lamp Case

1 Flozier, Full 1 Travel Case

Dimensions Weight

28 x 8 x 18” 25lb

(71 x 20.5 x 45.5cm) (11.3kg)

KIT-D4-120U

Diva-Lite 400 Kit (Universal), 120U

w/ Travel Case

KIT-D4-230U

Same as above for 230 voltage, 230U

Kit Contents:

1 Diva-Lite 400 Universal 1 Lamp Case

1 Flozier, Full 1 Travel Case

Dimensions Weight

28 x 8 x 18” 25lb

(71 x 20.5 x 45.5cm) (11.3kg)

KIT-D42-120

Diva-Lite 400 Kit, 120VAC

(2-Unit) w/ Flight Case

KIT-D42-230

Same as above for 230 voltage

Kit Contents:

2 Diva-Lite 400 2 Flozier, Full

2 Stand 2 Lamp Case

2 Off-set Mount 1 Flight Case

Dimensions Weight

22 x 16 x 33.5” 61.5lb

(56 x 41 x 85cm) (27.7kg)

KIT-D42-120U

Diva-Lite 400 Kit (Universal), 120U

(2-Unit) w/ Flight Case

KIT-D42-230U

Same as above for 230 voltage, 230U

Kit Contents:

2 Diva-Lite 400 Universal 2 Flozier, Full

2 Stand 2 Lamp Case

2 Off-set Mount 1 Flight Case

Dimensions Weight

22 x 16 x 33.5” 63lb

(56 x 41 x 85cm) (28.4kg)

KIT-D22-120

Diva-Lite 200 Kit, 120VAC

(2-Unit) w/ Flight Case

KIT-D22-230

Same as above for 230 voltage

Kit Contents:

2 Diva-Lite 200 2 Flozier, Full

2 Stand 1 Lamp Case

2 Off-set Mount 1 Flight Case

Dimensions Weight

22 x 13 x 33.5” 54lb

(56 x 33 x 85cm) (24.3kg)

KIT-D2-120/2

Diva-Lite 200 Kit, 120VAC

(2-Unit) w/ Rolling Case

KIT-D2-230/2

Same as above for 230 voltage

Kit Contents:

2 Diva-Lite 200 1 Lamp Case

2 Flozier, Full 1 Rolling Ship Case

Dimensions Weight

31.5 x 12.5 x 22” 41lb

(80 x 32 x 56cm) (18.5kg)

KIT-D2-120

Diva-Lite 200 Kit, 120VAC

w/ Travel Case

KIT-D2-230

Same as above for 230 voltage

Kit Contents:

1 Diva-Lite 200 1 Lamp Case

1 Flozier, Full 1 Travel Case

Dimensions Weight

28 x 8 x 15” 18lb

(71 x 20.5 x 38cm) (8.1kg)

The Gel Frame is held to the Fixture with 4 Velcro straps.

Position Lamp over

Lamp holder. Press lamp base down

until it clicks into place. Press lamp end

into lamp clip.

Press red locking tab down

and pull up on lamp.

Pull lamp out of lamp clip.

Warning!

Do Not lubricate

the sliding lock

mechanism on the

lamp holder.

A 180 degree turn is all that is required to

loosen the mount for orientation.

To adjust the tension on the lock lever,

pull handle away from mount.

This disengages the handle from the

screw mechanism and allows the lever

to be reoriented. You can also use a

screwdriver to adjust the tension.

Pull back on handle and adjust screw.

The Louver is fastened to the Fixture with 4 Velcro straps.

Mounted on a baby stand

Mounted to pipe grid

Note:

When hanging in

a studio, loop a safety

cord through the strain-

relief ring provided on

the back of the fixture.

MTP-B41F… Baby offset arm

The Baby Offset Arm allows fixtures

to mount on the center of a stand.

The Baby offset Arm can also be under

slung from a baby stand to use as an

up light.

VERTICAL MODE:

Follow the principle of lamp

base up and lamp tip down.

This orientation keeps the

mercury away from the

cathodes and provides best

color temperature stability

and best color rendering.

DO NOT operate fixtures with

lamp base in the down

position. Color can diverge

up to 400K and will get very

green.

HORIZONTAL MODE:

Even in the horizontal position

a slight rotation favoring the

lamp tips (lamp base higher

than the lamp tip) will allow

for better color temperature

stability.

LAMPS FAIL TO LIGHT:

•Check ambient temperature. Operating in temperatures above 125°F

(51°C) or below 60°F (15°C) the unit might have trouble starting.

•With the power switch in the ON position, the red light should be on.

If it is not, Voltage is not present. Check your power feed.

•The onboard dimmer should be full up. (Turned completely clockwise.)

•Check lamp contact. Lamps must be properly seated. If one lamp is

not making contact or is burned out, two lamps will be off.

•Replace lamp or lamps.

•After having checked that lamps are correctly seated, turn off power to

the fixture for 60 seconds and restart.

•Check that the lamp selector switch is in the appropriate setting.

Warning! To Ensure Proper Operation

ALWAYS TURN OFF THE FIXTURE

BEFORE connecting or disconnecting

lamps. After the lamps are properly

installed, the in-line switch can turn on the

Ballast. Avoid operating in temperatures

above 125°F (51°C) or below 60°F (15°C).

In temperatures below 60°F (15°C) the ballast may take longer to strike.

If lamps do not strike within 5 seconds, switch the ballast to OFF, and

try again. Check that the lamps are properly seated, set dimmer to Full and

restrike. If temperatures are too low, try to warm up the fixture to at least

60°F. Lamps will turn on at preset dimmer settings as long as the temperature

is above 60°F (15°C).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Kino Flo

Kino Flo

Kino Flo Freestyle 41 LED Manual de usuario

Kino Flo

Kino Flo Diva-Lite 401 Manual de usuario

Kino Flo

Kino Flo Mini-Flo Manual de usuario

Kino Flo

Kino Flo ParaZip 415 DMX Manual de usuario

Kino Flo

Kino Flo Freestyle 41 LED Manual de usuario

Kino Flo

Kino Flo Celeb 850 LED DMX Manual de usuario

Kino Flo

Kino Flo ParaZip 200 Manual de usuario

Kino Flo

Kino Flo FreeStyle T42 LED Manual de usuario

Kino Flo

Kino Flo DIV-L20X-120U Manual de usuario

Kino Flo

Kino Flo ParaBeam 400 Series Manual de usuario

Kino Flo

Kino Flo VistaBeam 600 Manual de usuario

Kino Flo

Kino Flo ParaBeam 410 Yoke Mount Manual de usuario

Kino Flo

Kino Flo Tegra 4Bank Universal Manual de usuario

Kino Flo

Kino Flo Bag-O-Light Manual de usuario

Kino Flo

Kino Flo Single Manual de usuario

Kino Flo

Kino Flo DIV-LX20U Manual de usuario

Kino Flo

Kino Flo Celeb 850 Manual de usuario

Kino Flo

Kino Flo Flathead 80 Manual de usuario

Kino Flo

Kino Flo Tegra 4Bank Universal Manual de usuario

Kino Flo

Kino Flo Image L80 LED Manual de usuario

Kino Flo

Kino Flo Mini-Flo KIT- 239X-12 Manual de usuario

Kino Flo

Kino Flo BarFly 100 Manual de usuario

Kino Flo

Kino Flo Flathead 80 Manual de usuario

Kino Flo

Kino Flo Celeb 400 DMX LED Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario