Kett Riceter fv208 Manual de usuario
Grain Moisture Tester Riceter fv208
Operating Manual
2
Thank you for purchasing our Grain/Rice/Seed Moisture Tester, Riceter
fv200 series. This tester can measure the moisture of grain by simple op-
eration, but proper operation is necessary for accurate moisture measure-
ment.
Please read this operating manual carefully before use.
Note: The pictures in this manual are examples and may differ from
actual product.
1
Contents of Package ............................................................................ 2
Part Names .............................................................................................. 3
Description of Display ......................................................................... 4
How to Place Batteries ........................................................................ 6
Before Measurement ........................................................................... 7
Measurement ......................................................................................... 8
Average Value....................................................................................... 17
Storage.................................................................................................... 18
Applications .......................................................................................... 19
Specications .......................................................................................20
Table of contents
2
Contents of Package
Operating
manual
Rice husker
TR-130
Carrying case
Sample tray
(2 pcs)
Spoon
with tweezers
Cleaning brush Battery
(AA size x4 pcs)
Inspection
certicate
Riceter
J·m·f checker
<Option>
3
Part Names
“POWER” button
“SELECT” button
Display Handle stop mark
Model No.
“MEA.” button (Measure)
“AVG.” button (Average)
Testing Chamber
Handle
4
This tester adopts the auto power off
function. The power of the tester is
automatically turned o in approx.
5 minutes after turning on the power if
no operation is performed.
Use of backlight in the display section
allows users to see the display clearly
even in the dark.
Battery Indicator
Moisture Content
Number of measurement
Application Name
Description of Display
5
Meanings of special marks The display may show marks as follows:
Battery mark Caution Battery is dead. Replace the batteries with new ones.
(displayed immediately after pressing the power switch and while using)
Over mark Caution Displayed when the measured result exceeded the upper limit of the
measurement range
Under mark Caution
Displayed when the measured result fell below the lower limit of the
measurement range, or the contact between the test sample tray
and the measuring unit of the main body was poor.
Error mark
Main unit temperature is too low -5°C or lower.
Main unit temperature is too high 50°C or higher.
• When measurement is performed with the Sample tray empty or the measuring unit is
poorly insulated due to condensation, high humidity, contamination, etc., the over mark,
under mark, or other meaningless numbers may be displayed. In such a case, clean the
measuring unit and dry it well in a natural way.
Description of Display
6
123
Take out the main unit
from the carrying case.
Take out the batteries
from the battery holder.
Open the battery box
on the back side of the
main unit, and place 4
batteries appropriately.
How to Place Batteries
7
Battery replacement
When the battery is running out, the
battery mark lights up the display.
Replace all 4 batteries (AA) with new
ones.
Those batteries are gradually discharging
even when the tester is not used.
It is recommended to always use new
batteries.
Place batteries in
the correct polarity
Riceter fv200 series is equipped with a
temperature compensation function.
However, the test unit and samples
are required to be thermally stabilized
before measurement.
Before MeasurementHow to Place Batteries
8
<All characters displayed after pressing the "POWER" button> <Model number and software version number>
Press the “POWER” button. All the characters and marks on the display section as
well as the backlight light up for 2 seconds, and then model number and software
version number are automatically displayed. The backlight goes out, and the tester
becomes a standby state for measuring.
1
Measurement
Ex) Riceter fv201
Tabla de contenidos
Otros manuales de Equipo de prueba de Kett
Kett
Kett HB-600 Manual de usuario
Kett
Kett PM-450 Manual de usuario
Kett
Kett PRg-930 Manual de usuario
Kett
Kett L-500 Manual de usuario
Kett
Kett HG-770 Manual de usuario
Kett
Kett HX-700 Manual de usuario
Kett
Kett HI-520 Manual de usuario
Kett
Kett PQ-520 Manual de usuario
Kett
Kett HK-300-1 Manual de usuario
Kett
Kett LE-373 Manual de usuario
Kett
Kett PR-930 Manual de usuario
Kett
Kett C-600 Manual de usuario
Kett
Kett LZ-990 Manual de usuario
Kett
Kett PB-3103 Manual de usuario
Kett
Kett KH-70 Manual de usuario
Kett
Kett HX-400 Manual de usuario
Kett
Kett MT-700 Manual de usuario
Kett
Kett HB-300 Manual de usuario
Kett
Kett PT-2700 Manual de usuario
Kett
Kett Riceter fg529 Manual de usuario
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
