Kenwood TK-D240V Manual de usuario

USER GUIDE

GUIDE DE L'UTILISATEUR

GUÍA DEL USUARIO

TK-D240

TK-D240V

TK-D340

TK-D340U

B5A-0929-00/01 (K)

VHF DIGITAL TRANSCEIVER

TK-D240

UHF DIGITAL TRANSCEIVER

TK-D340

USER GUIDE

This User Guide covers only the basic

operations of your radio. Ask your dealer for

information on any customized features they

may have added to your radio. For using details

instruction manual (User Manual), refer to the

following URL.

http://manual.kenwood.com/en_contents/search/keyword

THANK YOU

We are grateful you have chosen KENWOOD for your Digital

Transceiver applications.

CONTENTS

NOTICES TO THE USER.................................................. 3

Precautions.............................................................................. 5

TERMINAL DESCRIPTIONS ............................................10

UNPACKING AND CHECKING EQUIPMENT...........................11

suPPLieD accessories .......................................................... 11

PREPARATION ...........................................................11

instaLLing the antenna ....................................................... 11

instaLLing the channeL stoPPer....................................... 12

instaLLing/ reMoVing the BatterY PacK .......................... 13

charging the BatterY PacK................................................. 14

instaLLing the BeLt cLiP....................................................... 15

instaLLing the caP oVer the sPeaKer/ MicroPhone

JacKs......................................................................................... 15

instaLLing the oPtionaL sPeaKer/ MicroPhone

(or heaDset)............................................................................ 16

ORIENTATION ............................................................17

BASIC OPERATIONS ....................................................18

switching Power on/oFF...................................................... 18

aDJusting the VoLuMe.......................................................... 18

seLecting a Zone anD channeL........................................... 18

transMitting.......................................................................... 18

receiVing.................................................................................. 19

LeD inDicator status ............................................................ 19

NOTICES TO THE USER

◆Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

◆Illegal operation is punishable by ﬁne and/or imprisonment.

◆Refer service to qualiﬁed technicians only.

Safety: It is important that the operator is aware of, and

understands, hazards common to the operation of any

transceiver.

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or

modifications to this equipment may cause harmful interference unless

the modifications are expressly approved by the party responsible/

JVC KENWOOD. The user could lose the authority to operate this

equipment if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE

FCC

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can generate radio frequency

energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that the interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer for technical assistance.

The AMBE+2TM voice coding Technology embodied in this product is protected

by intellectual property rights including patent rights, copyrights and trade

secrets of Digital Voice Systems, Inc. This voice coding Technology is

licensed solely for use within this Communications Equipment. The user of

this Technology is explicitly prohibited from attempting to extract, remove,

decompile, reverse engineer, or disassemble the Object Code, or in any other

way convert the Object Code into a human-readable form. U.S. Patent Nos.

#8,315,860, #8,595,002, #6,912,495, #8,200,497, #7,970,606, and #8,359,197.

Firmware Copyrights

The title to and ownership of copyrights for ﬁrmware embedded in KENWOOD

product memories are reserved for JVC KENWOOD Corporation.

ATTENTION:

The RBRC Recycle seal found on KENWOOD

lithium-ion (Li-ion) battery packs indicates

KENWOOD’s voluntary participation in an

industry program to collect and recycle

Li-ion batteries after their operating life has

expired. The RBRC program is an alternative

to disposing Li-ion batteries with your regular

refuse or in municipal waste streams, which is

illegal in some areas.

For information on Li-ion battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD’s involvement in this program is part of our commitment to

preserve our environment and conserve our natural resources.

PRECAUTIONS

• Do not charge the transceiver and battery pack when they are wet.

• Ensure that there are no metallic items located between the

transceiver and the battery pack.

• Do not use options not speciﬁed by KENWOOD.

• If the die-cast chassis or other transceiver part is damaged, do not

touch the damaged parts.

• If a headset or headphone is connected to the transceiver, reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

• Do not place the microphone cable around your neck while near

machinery that may catch the cable.

• Do not place the transceiver on unstable surfaces.

• Ensure that the end of the antenna does not touch your eyes.

• When the transceiver is used for transmission for many hours, the

radiator and chassis will become hot. Do not touch these locations

when replacing the battery pack.

• Do not immerse the transceiver in water.

• Always switch the transceiver power off before installing optional

accessories.

• The charger is the device that disconnects the unit from the AC

mains line. The AC plug should be readily accessible.

• To dispose of batteries, be sure to comply with the laws and

regulations in your country or region.

WARNING

Turn the transceiver power off in the following locations:

• In explosive atmospheres (inﬂammable gas, dust particles,

metallic powders, grain powders, etc.).

• While taking on fuel or while parked at gasoline service stations.

• Near explosives or blasting sites.

• In aircraft. (Any use of the transceiver must follow the

instructions and regulations provided by the airline crew.)

• Where restrictions or warnings are posted regarding the use of

radio devices, including but not limited to medical facilities.

• Near persons using pacemakers.

CAUTION

• Do not disassemble or modify the transceiver for any reason.

• Do not place the transceiver on or near airbag equipment while

the vehicle is running. When the airbag inﬂates, the transceiver

may be ejected and strike the driver or passengers.

• Do not transmit while touching the antenna terminal or if

any metallic parts are exposed from the antenna covering.

Transmitting at such a time may result in a high-frequency burn.

• If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately,

remove the battery pack from the transceiver, and contact your

KENWOOD dealer.

• Use of the transceiver while you are driving may be against trafﬁc

laws. Please check and observe the vehicle regulations in your

area.

• Do not expose the transceiver to extremely hot or cold

conditions.

• Do not carry the battery pack (or battery case) with metal

objects, as they may short the battery terminals.

• Danger of explosion if the battery is incorrectly replaced; replace

only with the same type.

• When attaching a commercial strap to the transceiver, ensure

that the strap is durable. In addition, do not swing the transceiver

around by the strap; you may inadvertently strike and injure

another person with the transceiver.

• If a commercially available neck strap is used, take care not to

let the strap get caught on nearby machine.

• When operating the transceiver in areas where the air is dry, it is

easy to build up an electric charge (static electricity). When using

an earphone accessory in such conditions, it is possible for the

transceiver to send an electric shock through the earphone and

to your ear. We recommend you use only a speaker/microphone

in these conditions, to avoid electric shocks.

• Do not expose the transceiver to long periods of direct sunlight,

nor place it near heating appliances.

Information concerning the battery pack:

The battery pack includes ﬂammable objects such as organic

solvent. Mishandling may cause the battery to rupture

producing ﬂames or extreme heat, deteriorate, or cause other

forms of damage to the battery. Please observe the following

prohibitive matters.

DANGER

• Do not disassemble or reconstruct battery!

The battery pack has a safety function and protection circuit to avoid

danger. If they suffer serious damage, the battery may generate heat

or smoke, rupture, or burst into ﬂame.

• Do not short-circuit the battery!

Do not join the + and – terminals using any form of metal (such as a

paper clip or wire). Do not carry or store the battery pack in containers

holding metal objects (such as wires, chain-necklaces or hairpins). If

the battery pack is short-circuited, excessive current will ﬂow and the

battery may generate heat or smoke, rupture, or burst into ﬂame. It will

also cause metal objects to heat up.

• Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function is

damaged, or the electrolyte is ignited, the battery may generate heat

or smoke, rupture, or burst into ﬂame.

• Do not leave the battery near ﬁre, stoves, or other heat

generators (areas reaching over 80°C/ 176°F)!

If the polymer separator is melted due to high temperature, an

internal short-circuit may occur in the individual cells and the battery

may generate heat or smoke, rupture, or burst into ﬂame.

• Do not immerse the battery in water or get it wet by other

means!

If the battery’s protection circuit is damaged, the battery may charge

at extreme current (or voltage) and an abnormal chemical reaction

may occur. The battery may generate heat or smoke, rupture, or

burst into ﬂame.

• Do not charge the battery near ﬁre or under direct sunlight!

If the battery’s protection circuit is damaged, the battery may charge

at extreme current (or voltage) and an abnormal chemical reaction

may occur. The battery may generate heat or smoke, rupture, or

burst into ﬂame.

DANGER

• Use only the speciﬁed charger and observe charging

requirements!

If the battery is charged in unspeciﬁed conditions (under high

temperature over the regulated value, excessive high voltage or

current over regulated value, or with a remodeled charger), it may

overcharge or an abnormal chemical reaction may occur. The battery

may generate heat or smoke, rupture, or burst into ﬂame.

• Do not pierce the battery with any object, strike it with an

instrument, or step on it!

This may break or deform the battery, causing a short-circuit. The

battery may generate heat or smoke, rupture, or burst into ﬂame.

• Do not jar or throw the battery!

An impact may cause the battery to leak, generate heat or smoke,

rupture, and/or burst into ﬂame. If the battery’s protection circuit

is damaged, the battery may charge at an abnormal current (or

voltage), and an abnormal chemical reaction may occur. The battery

may generate heat or smoke, rupture, or burst into ﬂame.

• Do not use the battery pack if it is damaged in any way!

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

• Do not solder directly onto the battery!

If the insulator is melted or the gas release vent or safety function is

damaged, the battery may generate heat or smoke, rupture, or burst

into ﬂame.

• Do not reverse the battery polarity (and terminals)!

When charging a reversed battery, an abnormal chemical reaction

may occur. In some cases, an unexpected large amount of current

may ﬂow upon discharging. The battery may generate heat or

smoke, rupture, or burst into ﬂame.

• Do not reverse-charge or reverse-connect the battery!

The battery pack has positive and negative poles. If the battery pack

does not smoothly connect with a charger or operating equipment,

do not force it; check the polarity of the battery. If the battery pack is

reverse-connected to the charger, it will be reverse-charged and an

abnormal chemical reaction may occur. The battery may generate

heat or smoke, rupture, or burst into ﬂame.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Transceptor de Kenwood

Kenwood

Kenwood TK-2180 Manual de usuario

Kenwood

Kenwood TS-570D, TS-570S Manual de usuario

Kenwood

Kenwood TK-5220 K Manual de usuario

Kenwood

Kenwood TK-860G series Manual de usuario

Kenwood

Kenwood TS-590SG Manual

Kenwood

Kenwood NEXEDGE NX-720 Manual de usuario

Kenwood

Kenwood TK-863G Manual de usuario

Kenwood

Kenwood TS-440S Manual de usuario

Kenwood

Kenwood ProTalk TK-3401D Manual de usuario

Kenwood

Kenwood TR-751A K Manual de usuario

Kenwood

Kenwood TS-940S Manual de usuario

Kenwood

Kenwood TK-2000 Manual de usuario

Kenwood

Kenwood TK-2300-V4P - Protalk 2Way 2Watt 4Channel Vhf... Manual de usuario

Kenwood

Kenwood TK-809 Manual de usuario

Kenwood

Kenwood TK-7180 Instrucciones de instalación y funcionamiento

Kenwood

Kenwood TK-260G Manual de usuario

Kenwood

Kenwood TK-290 Manual de usuario

Kenwood

Kenwood TH-25A Series Manual de usuario

Kenwood

Kenwood TK-T300 Manual de usuario

Kenwood

Kenwood TS-530S Manual de usuario

Kenwood

Kenwood TS-950S Digital Manual de usuario

Kenwood

Kenwood UBZ-LJ8 Manual de usuario

Kenwood

Kenwood TK-2302 Manual de usuario

Kenwood

Kenwood TS-590S Manual de usuario

Manuales populares de Transceptor de otras marcas

Yaesu

Yaesu FT-7B Manual de usuario

Texas Instruments

Texas Instruments TLK10232 Manual de usuario

Mizuho

Mizuho MX-2 Guía del producto

Blitz

Blitz MJ-398U Manual de usuario

Utilicom

Utilicom LongRanger 2050 Manual de usuario

Standart

Standart HX290UKA Manual de usuario

Altronix

Altronix Pace1PTM Manual de usuario

Kirisun

Kirisun PT2208 Manual de usuario

ELECRAFT

ELECRAFT KX2 Manual de usuario

Zodiac

Zodiac K3 Manual de usuario

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manual de usuario

Siemens

Siemens PSO 4000 Manual de usuario

Midland

Midland G8E-BT Manual

ComNav

ComNav Mariner X2 Manual de usuario

Uniden

Uniden UH820 Series Manual de usuario

Standard Horizon

Standard Horizon HX320E Manual de usuario

Em-Trak

Em-Trak A100 Manual de usuario

HPE

HPE Aruba QSFP28 Manual de usuario