Kenwood NX-5300SA Manual de usuario

UHF DIGITAL TRANSCEIVER

USER GUIDE

B5A-1247-00 (M)

NX-5300SA

This User Guide covers only the basic

operations of your radio. Ask your dealer for

information on anycustomized features they

may have added to your radio. For using

details User Manual, refer to the following URL.

http://manual.kenwood.com/en_contents/search/keyword

THANK YOU

We are grateful you have chosen KENWOOD for your Digital

Transceiver applications.

CONTENTS

NOTICES TO THE USER.................................................. 3

PRECAUTIONS............................................................ 4

TERMINAL DESCRIPTIONS ............................................ 11

UNPACKING AND CHECKING EQUIPMENT........................... 12

SUPPLIED ACCESSORIES.............................................. 12

PREPARATION ........................................................... 13

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK ...................13

INSTALLING THE (OPTIONAL) ANTENNA ................................................ 14

INSTALLING THE BELT CLIP .................................................................... 14

INSTALLING THE CAP OVER THE UNIVERSAL CONNECTOR................... 15

INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET.. 15

INSTALLING THE microSD MEMORY CARD ............................................ 16

ORIENTATION ............................................................ 17

KEYS AND CONTROLS.............................................................................17

DISPLAY .................................................................................................. 20

BASIC OPERATIONS .................................................... 23

SWITCHING POWER ON/ OFF .................................................................. 23

ADJUSTING THE VOLUME ....................................................................... 23

SELECTING A ZONE AND CHANNEL ........................................................23

TRANSMITTING ....................................................................................... 24

RECEIVING............................................................................................... 24

INFORMATION ON SOFTWARE LICENSE............................. 25

NOTICES TO THE USER

•Government law prohibits the operation of unlicensed radio

transmitters within the territories under government control.

•Illegal operation is punishable by ﬁne and/or imprisonment.

•Refer service to qualiﬁed technicians only.

Safety: It is important that the operator is aware of and

understands hazards common to the operation of any transceiver.

The AMBE+2TM voice coding Technology embodied in this product

is protected by intellectual property rights including patent rights,

copyrights and trade secrets of Digital Voice Systems, Inc. This voice

coding Technology is licensed solely for use within this Communications

Equipment. The user of this Technology is explicitly prohibited

from attempting to extract, remove, decompile, reverse engineer, or

disassemble the Object Code, or in any other way convert the Object

Code into a human-readable form. U.S. Patent Nos. #6,199,037,

#6,912,495, #8,200,497, #7,970,606 and #8,359,197

SD™ and microSD™ are trademarks of SD-3C, LLC in the United States and/or

other countries.

The Bluetooth®word mark and logo are registered trademarks owned by the

Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation

is under license. Other trademarks and trade names are those of their respective

owners.

Firmware Copyrights

The title to and ownership of copyrights for ﬁrmware embedded in KENWOOD

product memories are reserved for JVC KENWOOD Corporation.

PRECAUTIONS

• Do not charge the transceiver and battery pack when they are wet.

• Ensure that there are no metallic items located between the

transceiver and the battery pack.

• Do not use options not speciﬁed by KENWOOD.

• If the die-cast chassis or other transceiver part is damaged, do not

touch the damaged parts.

• If a headset or headphone is connected to the transceiver, reduce

the transceiver volume. Pay attention to the volume level when

turning the squelch off.

• Do not place the microphone cable around your neck while near

machinery that may catch the cable.

• Do not place the transceiver on unstable surfaces.

• Ensure that the end of the antenna does not touch your eyes.

• When the transceiver is used for transmission for many hours, the

radiator and chassis will become hot. Do not touch these locations

when replacing the battery pack.

• When water gets into the microphone opening or the speaker

grill, the voice level may become incoherent or distorted. Lightly

shake the transceiver to remove the water from the speaker and/or

microphone before operating the transceiver.

• Always switch the transceiver power off before installing optional

accessories.

Turn the transceiver power off in the following locations:

• Near explosives or blasting sites.

• In aircrafts. (Any use of the transceiver must follow the

instructions and regulations provided by the airline crew.)

• Where restrictions or warnings are posted regarding the use of

radio devices, including but not limited to medical facilities.

• Near persons wearing pacemakers.

Turn the transceiver power off in the following locations,

unless the model is speciﬁcally qualiﬁed Intrinsically Safe:

• In explosive atmospheres (inﬂammable gas, dust particles,

metallic powders, grain powders, etc.).

• While taking on fuel or while parked at gasoline service stations.

• Do not remove the black sheet from the reverse side of the

transceiver (refer to the illustration below). Removal of this

sheet decreases the waterproof efﬁciency of the transceiver and

may cause malfunctions if water seeps into the transceiver.

• The orange seal on the reverse side of the transceiver is

important with respect to the waterproof efﬁciency of the

transceiver. Do not place stickers or other materials on or

around the seal shown in the ﬁgure, or on the reverse side of

the battery pack. Doing so will impair the waterproof efﬁciency

of the transceiver and may cause it to break down. Additionally,

in order to prevent damage to the seal, do not allow it to come in

contact with foreign materials.

• Do not disassemble or modify the transceiver for any reason.

• Do not place the transceiver on or near airbag equipment while

the vehicle is running. When the airbag inﬂates, the transceiver

may be ejected and strike the driver or passengers.

• Do not transmit while touching the antenna terminal or if

any metallic parts are exposed from the antenna covering.

Transmitting at such a time may result in a high-frequency burn.

• If an abnormal odor or smoke is detected coming from the

transceiver, switch the transceiver power off immediately,

remove the battery pack from the transceiver, and contact your

KENWOOD dealer.

• Use of the transceiver while you are driving may be against

trafﬁc laws. Please check and observe the vehicle regulations

in your area.

• To dispose of batteries, be sure to comply with the laws and

regulations in your country or region.

• Do not expose the transceiver to extremely hot or cold

conditions.

• Do not carry the battery pack (or battery case) with metal

objects, as they may short the battery terminals.

• Danger of explosion if the battery is incorrectly replaced;

replace only with the same type.

• When attaching a commercial strap to the transceiver,

ensure that the strap is durable. In addition, do not swing the

transceiver around by the strap; you may inadvertently strike

and injure another person with the transceiver.

• If a commercially available neck strap is used, take care not to

let the strap get caught on nearby machine.

• When operating the transceiver in areas where the air is dry, it is

easy to build up an electric charge (static electricity).

When using an earphone accessory in such conditions, it is

possible for the transceiver to send an electric shock through

the earphone and to your ear. We recommend you use only

a speaker/microphone in these conditions, to avoid electric

shocks.

• Do not expose the transceiver to long periods of direct sunlight,

nor place it near heating appliances.

Information concerning the battery pack:

The battery pack includes ﬂammable objects such as organic solvent.

Mishandling may cause the battery to rupture producing ﬂames or

extreme heat, deteriorate, or cause other forms of damage to the

battery. Please observe the following prohibitive matters.

•Do not disassemble or reconstruct battery!

The battery pack has a safety function and protection circuit to

avoid danger. If they suffer serious damage, the battery may

generate heat or smoke, rupture, or burst into ﬂame.

•Do not short-circuit the battery!

Do not join the + and – terminals using any form of metal (such

as a paper clip or wire). Do not carry or store the battery pack

in containers holding metal objects (such as wires, chain-

necklace or hairpins). If the battery pack is short-circuited,

excessive current will ﬂow and the battery may generate heat

or smoke, rupture, or burst into ﬂame. It will also cause metal

objects to heat up.

•Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function

is damaged, or the electrolyte is ignited, the battery may

generate heat or smoke, rupture, or burst into ﬂame.

•Do not leave the battery near ﬁres, stoves, or other heat

generators (areas reaching over 80°C/ 176°F)!

If the polymer separator is melted due to high temperature,

an internal short-circuit may occur in the individual cells and

the battery may generate heat or smoke, rupture, or burst into

ﬂame.

•Avoid immersing the battery in water or getting it wet by

other means!

If the battery becomes wet, wipe it off with a dry towel before

use. If the battery’s protection circuit is damaged, the battery

may charge at extreme current (or voltage) and an abnormal

chemical reaction may occur. The battery may generate heat or

smoke, rupture, or burst into ﬂame.

•Do not charge the battery near ﬁres or under direct

sunlight!

If the battery’s protection circuit is damaged, the battery

may charge at extreme current (or voltage) and an abnormal

chemical reaction may occur. The battery may generate heat or

smoke, rupture, or burst into ﬂame.

•Use only the speciﬁed charger and observe charging

requirements!

If the battery is charged in unspeciﬁed conditions (under high

temperature over the regulated value, excessive high voltage or

current over regulated value, or with a remodelled charger), it

may overcharge or an abnormal chemical reaction may occur.

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

•Do not pierce the battery with any object, strike it with an

instrument, or step on it!

This may break or deform the battery, causing a short-circuit.

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

•Do not jar or throw the battery!

An impact may cause the battery to leak, generate heat

or smoke, rupture, and/or burst into ﬂame. If the battery’s

protection circuit is damaged, the battery may charge at an

abnormal current (or voltage), and an abnormal chemical

reaction may occur.

•Do not use the battery pack if it is damaged in any way!

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

•Do not solder directly onto the battery!

If the insulator is melted or the gas release vent or safety

function is damaged, the battery may generate heat or smoke,

rupture, or burst into ﬂame.

•Do not reverse the battery polarity (and terminals)!

When charging a reversed battery, an abnormal chemical

reaction may occur. In some cases, an unexpected large

amount of current may ﬂow upon discharging. The battery may

generate heat or smoke, rupture, or burst into ﬂame.

•Do not reverse-charge or reverse-connect the battery!

The battery pack has positive and negative poles. If the battery

pack does not smoothly connect with a charger or operating

equipment, do not force it; check the polarity of the battery. If

the battery pack is reverse-connected to the charger, it will be

reverse-charged and an abnormal chemical reaction may occur.

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

•Do not touch a ruptured and leaking battery!

If the electrolyte liquid from the battery gets into your eyes,

wash your eyes out with fresh water as soon as possible,

without rubbing your eyes. Go to the hospital immediately. If

left untreated, it may cause eye-problems.

•Do not charge the battery for longer than the speciﬁed

time!

If the battery pack has not ﬁnished charging even after the

regulated time has passed, stop it. The battery may generate

heat or smoke, rupture, or burst into ﬂame.

•Do not place the battery pack into a microwave or high

pressure container!

The battery may generate heat or smoke, rupture, or burst into

ﬂame.

•Keep ruptured and leaking battery packs away from ﬁre!

If the battery pack is leaking (or the battery emits a bad odor),

immediately remove it from ﬂammable areas. Electrolyte

leaking from battery can easily catch on ﬁre and may cause the

battery to generate smoke or burst into ﬂame.

•Do not use an abnormal battery!

If the battery pack emits a bad odor, appears to have color

changes, is deformed, or seems abnormal for any other reason,

remove it from the charger or operating equipment and do not

use it. The battery may generate heat or smoke, rupture, or

burst into ﬂame.

NOTIFICATION OF WATER-RESISTANT MODEL

Water Resistance and Maintenance

Water-Resistant Model transceiver conforms to the following standards.

Immersion: The transceiver retains its water resistant capabilities

outlined in U.S. Military Standards when submersed in water at a depth

of 1 meter (3.28 feet) for 2 hours.

IP67/ IP68: The IP standard is the protection level speciﬁed by the

international standard IEC 60529. The ﬁrst numeral indicates the "dust-

resistant level" and the second numeral indicates the "water-resistant" level.

Note:

• Initial water-resistant tests and procedures are performed

products upon being ordered from KENWOOD.

PRECAUTIONS

• The applicable standards listed above do not assure that the

transceiver can be used in water. The transceiver may be damaged

in a situation in which the maximum depth is over 1 meter or the

maximum submersion time exceeds 2 hours.

• Observe the following precautions to maintain the transceiver’s

water-resistant performance:

a) Do not drop or apply strong physical shocks to the transceiver.

b) Do not disassemble or attempt to modify the transceiver. (If it is

disassembled or modiﬁed, its performance is not guaranteed.)

c) Do not soak the transceiver in water that contains a solvent or

surfactant, such as detergent or alcohol.

• If it is soaked in muddy water or salt water (including sea water),

it may become corroded. Immediately ﬂush with fresh water and

then wipe dry with a soft cloth.

• If water is splashed onto the microphone, the battery, or the

antenna terminal, clean and dry them with a soft cloth before

reconnecting to the transceiver.

• When water gets into the microphone opening or the speaker

grill, the voice level may become low or distorted. Lightly shake

the transceiver to remove the water from the speaker and/or

microphone before operating the transceiver.

•

Use of any option on the transceiver not speciﬁed by KENWOOD, may

reduce or void the water resistant and dust resistant performance.

Tabla de contenidos

Otros manuales de Transceptor de Kenwood

Kenwood

Kenwood TH-F6A Manual de usuario

Kenwood

Kenwood TK-3212 Manual de usuario

Kenwood

Kenwood TS-450S Manual de usuario

Kenwood

Kenwood TS-770 Manual de usuario

Kenwood

Kenwood TS-830 Manual de usuario

Kenwood

Kenwood TK-760 Manual de usuario

Kenwood

Kenwood TK-3260EX Manual de usuario

Kenwood

Kenwood TS-850S Manual de usuario

Kenwood

Kenwood TK-3312 Manual de usuario

Kenwood

Kenwood TS-2000 Manual de usuario

Kenwood

Kenwood TK-3101K Manual de usuario

Kenwood

Kenwood TS-700G Manual de usuario

Kenwood

Kenwood TS-515 Manual de usuario

Kenwood

Kenwood TK-2140 Manual de usuario

Kenwood

Kenwood TR-7600 Manual de usuario

Kenwood

Kenwood TK-3302 Manual de usuario

Kenwood

Kenwood TS-570D, TS-570S Manual de usuario

Kenwood

Kenwood TK-2200 Manual de usuario

Kenwood

Kenwood TS-990S Manual de usuario

Kenwood

Kenwood TH-K20A Manual de usuario

Kenwood

Kenwood TK-285 Guía

Kenwood

Kenwood TH-415A Manual de usuario

Kenwood

Kenwood TS-820 Manual de usuario

Kenwood

Kenwood TM-241A Manual de usuario

Manuales populares de Transceptor de otras marcas

Yaesu

Yaesu FT-7B Manual de usuario

Texas Instruments

Texas Instruments TLK10232 Manual de usuario

Mizuho

Mizuho MX-2 Guía del producto

Blitz

Blitz MJ-398U Manual de usuario

Utilicom

Utilicom LongRanger 2050 Manual de usuario

Standart

Standart HX290UKA Manual de usuario

Altronix

Altronix Pace1PTM Manual de usuario

Kirisun

Kirisun PT2208 Manual de usuario

ELECRAFT

ELECRAFT KX2 Manual de usuario

Zodiac

Zodiac K3 Manual de usuario

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manual de usuario

Siemens

Siemens PSO 4000 Manual de usuario

Midland

Midland G8E-BT Manual

ComNav

ComNav Mariner X2 Manual de usuario

Uniden

Uniden UH820 Series Manual de usuario

Standard Horizon

Standard Horizon HX320E Manual de usuario

Em-Trak

Em-Trak A100 Manual de usuario

HPE

HPE Aruba QSFP28 Manual de usuario