Kent Scientific CODA Manual de usuario

CODA™Noninvasive

Blood Pressure

System

User’s Guide for

High Throughput Systems

CODA™Noninvasive

Blood Pressure

System

User’s Guide for

High Throughput Systems

TABLE OF CONTENTS

Introduction

System Components ....................................................................1

About the CODA® Noninvasive

Blood Pressure System............................................................... 2

CODA PC Software

Software System Requirements .............................................. 3

Installing the CODA Software ................................................... 3

Using the CODA Software .........................................................4

Best Data Practices ..................................................................... 7

Using the CODA

Set Up Hardware .......................................................................... 8

Conﬁgure Settings....................................................................... 8

Connect the Animal................................................................... 10

CODA Tips ....................................................................................13

Diagnostic Procedures / Troubleshooting

CODA Cu & Bladder Maintenance....................................... 14

Device Tests and Other Diagnostic Procedures ................ 14

Improving Your Data ..................................................................17

CODA Error Messages ..............................................................18

Cleaning and Decontamination.............................................. 19

General Information

Contact........................................................................................ 20

Warranty ..................................................................................... 20

Satisfaction Guarantee ..............................................................21

Speciﬁcations ..............................................................................21

Index...................................................................................................23

Introduction

The CODA is not designed, intended, or authorized for use in human applications.

System Components

Front Controller Panel

Rear Controller Panel

About the CODA Noninvasive Blood Pressure System

The Method

An occlusion tail cu is inﬂated to momentarily impede blood ﬂow to an animal’s

tail. The cu is deﬂated slowly and a second tail cu, incorporating Volume Pressure

Recording (VPR) technology, measures the physiological characteristics of the returning

blood ﬂow. As the blood returns to the tail, the VPR cu measures the tail swelling

that results from arterial pulsations from the blood ﬂow. Systolic blood pressure is

measured automatically at the ﬁrst appearance of tail swelling. Diastolic blood pressure

is measured automatically when the rate of swelling stops increasing in the tail.

CODA PC Software

The CODA PC software controls the system and allows you to set up, run, and monitor blood

pressure from a desktop or laptop computer.

Software System Requirements

Operating System: Windows® 7, 64 bit

Windows® 8, 64 bit

Windows® 10, 64 bit

Processor: 2.0 GHz or higher

RAM: 2 GB for 64 bit

USB Ports: 1

Cards: Video card, 1024x768 resolution

Internet Connection: Yes

If you purchased your PC outside of the US,

some of your Regional and Language settings

will require adjustment:

1. Open the Windows Control Panel and

select Regional and Language Options.

2. At the Regional Options tab, select the

language that most closely matches your

location, and click Customize.

3. In both the Numbers and Currency tabs,

set Decimal Symbol to be a point (.).

Installing the CODA Software

1. Ensure that your account has full administrative rights.

2. Close all open applications on the PC.

3. Connect your CODA to the PC.

4. Open provided CODA software link.

(The CODA Software is provided via email link with the subject line “CODA

Software Link and Shipping Details”. If no link is provided, contact Kent

Scientiﬁc.)

5. Follow the on-screen instructions to install the CODA software.

The CODA software installer cannot be used across

multiple accounts on a shared computer system. It

must be installed on a single computer under only one

account log-in.

Using the CODA Software

1. Open the CODA Software and select the CODA device.

o When you open the CODA Software, the Device Manager appears. Click Use

All Displayed Devices to proceed using the detected CODA.

2. Create or add to your list of Users, if necessary.

o You must create a database of Users, Animals, and Animal Groups for your

experiments. You will select items from these categories for each individual

experiment you create. Create your database with the User and Animal

Manager. You may enter the information for your upcoming experiment only

or the information that you plan to use for future experiments.

Device Manager Screen:

User and Animal Manager Screen 1:

User and Animal Manager Screen 2:

3. Create a new Experiment, and run a new Session of that experiment. Once you

have created an experiment, you can return to it later to add additional sessions.

o Before you can run an experiment, you must create it by giving it a name and

assigning Users and Animals. Once you have created the experiment, you

can return to it at any time for additional sessions.

User and Animal Manager Screen 3:

Best Data Practices

• Kent Scientiﬁc strongly recommends that you back up your database regularly,

and also Export your sessions to a PDF or .csv ﬁle after every run.

• Take extra care when deleting records, including Animals, Users, Experiments, or

Sessions. In certain cases, this will delete all data associated with that record

from your software. Conﬁrm that you have made a PDF or .csv backup of any

associated data before deleting records.

• After each session is complete, take an average of the session readings. Be sure

to use at least 10 ‘accepted’ readings and increase your cycles as needed. If you

are unable to collect 10 accepted readings per session, see Troubleshooting on

page 13 and contact Kent Scientiﬁc for assistance.

Otros manuales para CODA

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Kent Scientific

Kent Scientific

Kent Scientific Rovent Jr. Manual de usuario

Kent Scientific

Kent Scientific CODA Manual de usuario

Kent Scientific

Kent Scientific MouseSTAT Jr Manual de usuario

Kent Scientific

Kent Scientific CODA Manual de usuario

Kent Scientific

Kent Scientific SomnoSuite Manual de usuario

Kent Scientific

Kent Scientific PhysioSuite Manual de usuario

Kent Scientific

Kent Scientific SomnoPath Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario