KECAG KC-809 Manual de usuario
Wall Mountable CD Player
READ ME
BEFORE USAGE
MODEL:KC-809
02
Warning / Reminder: Aftersales Service Contact
4-Steps Quick Instruction
1. Remove the paper CD
and put a correct CD
dics.
2. Insert the USB power cable
into the 5V2A adaptor and
plug into power outlet AC
110-240V
3、Pull the pulling cable
switch to power on,it
will read CD automatically.
4、Remove the insulating
film on the battery drawer
before remote it.
1. The power supply input adaptor to CD player must be 5V
1.5-2.0A.
2. Put a CD to avoid dust in condition of long time non-use.
3. Do not use cracked or damaged CD.
4. Do not touch the laser by hand.
5. The CD player can not be powered-on by the remote.You
have to pull the pulling-cord-switch before using remote.
Email： [email protected]
( Remember to mention the order # )
You will be responsed within 12hrs
Quick Usage Instruction …………………………………………………………… 2
Contents …………………………………………………………………………… 3
Packing Details ……………………………………………………………………… 4
Structrue and Buttons …………………………………………………………… 5
Remote ……………………………………………………………………………… 6
CD Mode Operation ……………………………………………………………… 7
BT Mode Operation ……………………………………………………………… 8
FM Radio Operation ……………………………………………………………… 9
AUX Mode Operation …………………………………………………………… 10
USB/SD Flash Disk & A-B Repeat & Audio Output ……………………… 11
LED display & LED light …………………………………………………………… 12
Sleep timer operation ………………………………………………………………… 13
Troubleshooting & Specifications ……………………………………………… 14
Wall Mounting Instruction ………………………………………………………… 15
03
Content
Packing List
CD player & Paper Disc Cover Remote Desk Stand 5V2A USB adaptor
Wall Mount Plate 3.5mm male-to-male Cable Wall Mount Kit Manual
04
Structure and buttons
SD reading port
Volume + / - LED display
show the working mode,
playing track,playing
time
LED multi color light
Shows related color on
different working status.
05
• 3.5mm audio jack for headphone
• AUX-in port connect with mobile/PC via 3.5 audio cable
• Output to external speaker via 3.5mm audio cable
2.5 meter power cable
(Pulling switch.Pull to power on/off)
USB flash disk reading port
MODE button,short press to
shift CD-USB-SD-BT-FM-AUX
Short press for NEXT / PREV
Long press for forward / backward
Short press for NEXT / PREV
Long press for forward / backward
BT
Play / Pause
CD Mode
Loop select key：
Repeat one/All/Random/Off
A-B repeat
AUX
Standby
NOT a power key to power on/off
Volume +/-
USB Mode
Number keys
Remote
06
infrared transmitter
（not a light）
FM Mode / Search
Stop
Sleep timer
CD Mode
Two ways to shift into CD mode：
① Press MODE until it shifts to CD mode
② Press CD key on remote to shift into CD mode
● Put a correct CD and pull the power switch,it will read and play CD
automatically after power on.
● CD player will shift into FM radio mode automatically after power
on if the CD is not readable
● It supports forward/ backward & A-B repeat .You can select tracks
by the digital buttons on remote
● When CD player is power on ,it plays the same track which was
playing when last time power off
07
BT Mode Two methods to shift into BT Mode：
① Press MODE to shift to BT mode
② Press the BT key on remote
Search the BT and pair with KECAG
● BT list name ”KECAG”
● When the CD player pairs with any BT enabled
devices.It works the same theory as other BT
speakers.It receives BT from other devices but
not transmit BT to any other BT earphone
/ speaker
● The remote is able to control volume and NEXT/
PREV in BT working status
08
T
FM Radio
Two methods to shift into FM mode：
① Press the MODE butoon to shift from CD to FM mode
② Press the FM key on remote
Full auto search / semi-auto search
●Full auto search：Under FM working mode,short press the FM key to start full-auto
search，wait for a short time to complete the auto search and the searched channels
will be saved into the number buttons.then you can press number keys on remote to
play the related chanels.。
●Semi-auto search: Under FM working mode，Long press NEXT/PREV key and release
finger until the player become mute and it will automatically shift into the next/prev
FM channel。Each time it searches only one channel and you can save this current
track onto any number by long pressing the related number. key. on remote
09
AUX Mode
Two method to shift into AUX：
① Press MODE to shift to AUX mode
② Press the AUX key on remote
Mobile
Tablet
Computer
connect external device with CD player via its 3.5mm audio
cable and then shift CD player into AUX mode
● Under the AUX mode. the CD player works as a wired
speaker
● It can be used as a PC speaker in this mode.
audio singnal from external into CD player
10
Tabla de contenidos
