KaVo MASTERspace Workplace Manual de usuario
Operating Instruction
MASTERspace® - Workplace
Always be on the safe side.
Sales:
KaVo Dental GmbH
Bismarckring 39
D-88400 Biberach
Tel. +49 7351 56-0
Fax +49 7351 56-1488
Manufacturer:
Kaltenbach & Voigt GmbH
Bismarckring 39
D-88400 Biberach
www.kavo.com
Operating Instruction MASTERspace® - Workplace
Contents
Contents
Contents ............................................................................................................................................................1
1 User instructions ............................................................................................................................................3
1.1 User guide ................................................................................................................................................3
1.1.1 Abbreviations ....................................................................................................................................3
1.1.2 Symbols ............................................................................................................................................3
1.1.3 Target group .....................................................................................................................................3
1.1.4 Meaning of the pictograms ...............................................................................................................4
1.2 Service .....................................................................................................................................................5
1.3 Warranty provisions ..................................................................................................................................6
1.4 Transportation and storage ......................................................................................................................7
1.4.1 Currently valid packaging ordinance ................................................................................................7
1.4.2 Damage in transit .............................................................................................................................7
1.4.3 Information on the packaging: Storage and transport ......................................................................9
2 Safety ...........................................................................................................................................................10
2.1 Description of safety instructions ............................................................................................................10
2.1.1 Warning symbol ..............................................................................................................................10
2.1.2 Structure .........................................................................................................................................10
2.1.3 Description of danger levels ...........................................................................................................10
2.2 Safety instructions ..................................................................................................................................11
2.2.1 General information ........................................................................................................................11
2.3 Purpose – Proper use .............................................................................................................................12
3 Product description ......................................................................................................................................13
3.1 Scope of delivery ....................................................................................................................................13
3.2 MASTERspace® work surface ................................................................................................................14
3.3 Technical data ........................................................................................................................................15
3.4 Rating plates ..........................................................................................................................................16
4 Installation and connection of MASTERspace® ...........................................................................................17
4.1 Check the consignment for completeness .............................................................................................17
4.2 Check the mains voltage and mains frequency ......................................................................................18
4.3 Select location ........................................................................................................................................19
4.4 Installation and connection of the workplace ..........................................................................................20
4.5 Check mark the symbols on the attachment characteristics label ..........................................................30
4.6 Connect the gas, compressed air and electrical supplies ......................................................................31
5 First use .......................................................................................................................................................32
6 Operation .....................................................................................................................................................33
6.1 Using a pneumatic hand-held nozzle .....................................................................................................33
6.2 Opening and closing the gas tap ............................................................................................................34
7 Maintenance ................................................................................................................................................35
7.1 Cleaning the workplace ..........................................................................................................................35
7.2 Caring for the work surface ....................................................................................................................36
7.3 Maintenance of the safety hose for the bunsen burner ..........................................................................37
8 Accessories ..................................................................................................................................................38
9 Service replacement parts ...........................................................................................................................39
10 Declaration of conformity ...........................................................................................................................40
1/41
Operating Instruction MASTERspace® - Workplace
Contents
2/41
Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.1 User guide
1 User instructions
1.1 User guide
Requirement
Read these instructions before the initial startup to prevent misuse and damage.
1.1.1 Abbreviations
Short
form
Explanation
GA Instructions for use
PA Care instructions
MA Assembly instructions
TA Technician's instructions
STK Safety check
IEC International Electrotechnical Commission
RA Repair instructions
EMC Electromagnetic compatibility
1.1.2 Symbols
Important information for users and technicians
CE mark (Communauté Européenne). A product with this mark meets the
requirements of the relevant EC directives, i.e. the applicable standards in
Europe.
Action request
Follow instructions for use!
See the section Safety/Warning Symbol
Open, remove, loosen, etc.
Close, screw in, fasten, etc.
1.1.3 Target group
Important information for users and technicians
3/41
Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.1 User guide
1.1.4 Meaning of the pictograms
Automatic mode, automatic procedure
Close, screw in, fasten etc.
Open, detach, loosen etc.
More, higher
Less, lower
Continuous operation
Time, time-based sequence
Disconnect the mains plug
4/41
Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.2 Service
1.2 Service
Service hotline:
+49 7351 56-1600
Please indicate the product serial number in all requests.
Additional information can be obtained at: www.kavo.com
5/41
Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.3 Warranty provisions
1.3 Warranty provisions
Within the framework of applicable KaVo delivery and payment conditions, KaVo
guarantees proper function, freedom from flaws in material and manufacturing for
a period of 12 months from the date of purchase demonstrated by the purchaser.
In case of justified complaints, KaVo will honor its warranty with a free replacement
or repair.
The warranty does not cover defects and their consequences that arose or may
have arisen due to natural wear, improper handling, cleaning or maintenance, non-
compliance with operating, maintenance or connection instructions, corrosion, con‐
taminated media supply or chemical or electrical influences deemed abnormal or
impermissible in accordance with factory specifications.
The warranty does not usually cover lamps, light conductors made of glass and
glass fibers, glassware, rubber parts and the colourfastness of plastic parts.
The warranty expires when defects or their consequences can arise from manipu‐
lations or changes to the product. Warranty claims can only be asserted when they
are immediately reported to KaVo in writing.
This notification must be accompanied by a copy of the invoice or delivery note on
which the manufacturing number is clearly visible. In addition to the guaranty, the
statutory warranty claims of the purchaser also apply with a warranty period of 12
months.
The following persons are authorised to repair and service KaVo products:
▪ technicians at KaVo branches throughout the world,
▪ technicians of authorised dealers who have been specially trained by KaVo,
▪ independent technicians who have been specially trained by KaVo.
Approvals and permits will be rendered null and void in the event that changes are
made by third parties. KaVo recommends that only genuine replacement parts are
used during operation and for repairs.
6/41
Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.4 Transportation and storage
1.4 Transportation and storage
1.4.1 Currently valid packaging ordinance
Note
Only applicable for the Federal Republic of Germany.
KaVo transport packaging must be disposed of and recycled by local disposal ser‐
vice providers and recycling companies in accordance with Dual System require‐
ments.
For more information about disposal and recycling, and an up-to-date list of local
disposal service providers and recycling companies, please visit the following In‐
ternet sites:
http://www.umweltdatenbank.de
http://www.quality.de
KaVo will bring KaVo transport packaging returned by the customer at the
customer's own cost to the appropriate recycling companies without reimburse‐
ment..
1.4.2 Damage in transit
In Germany
If external damage to the packaging is visible upon delivery, follow the procedure
below:
1. The recipient must record the loss or damage in the notice of delivery. The re‐
cipient and employee of the transportation firm must sign the notice of delivery.
2. Leave the product and packaging unchanged.
3. Do not use the product.
4. Report damage to the shipping company.
5. Report damage to KaVo.
6. A damaged product cannot be returned before talking with KaVo.
7. Send the signed notice of delivery to KaVo.
If the product is damaged and there is no discernable damage to the packaging
upon delivery, proceed as follows:
1. Report damage immediately or at least 7 days after the delivery to the delivery
company. .
2. Report damage to KaVo.
3. Leave the product and packaging unchanged.
4. Do not use a damaged product.
Note
If the recipient does not follow one of the above instructions, the damage will be
held to have occurred after the delivery (according to ADSp. Art. 28)..
7/41
Operating Instruction MASTERspace® - Workplace
1 User instructions | 1.4 Transportation and storage
Outside of Germany
Note
KaVo is not liable for damage arising from transportation.
Immediately inspect the delivery after receipt!
If external damage to the packaging is visible upon delivery, follow the procedure
below:
1. The recipient must record the loss or damage in the notice of delivery. The re‐
cipient and employee of the transportation firm must sign the notice of delivery.
The recipient can only assert damages against the transportation company ba‐
sed on these records.
2. Leave the product and packaging unchanged.
3. Do not use the product.
If the product is damaged and there is no discernable damage to the packaging
upon delivery, proceed as follows:
1. Report the damage immediately or at least 7 days after the delivery to the deli‐
very company .
2. Leave the product and packaging unchanged.
3. Do not use a damaged product.
Note
If the recipient does not follow one of the above instructions, the damage will be
held to have occurred after the delivery (according to . CMR law , section 5, Art.
30).
8/41
Tabla de contenidos
Otros manuales de Equipo de laboratorio de KaVo
Manuales populares de Equipo de laboratorio de otras marcas
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manual de usuario
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manual de usuario
NI
NI PXI-5422 Manual
Collomix
Collomix Aqix Manual de usuario
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario
Ocean Insight
Ocean Insight FLAME-NIR+ Manual de usuario
