Kauber FRAME Series Manual de usuario

PROJECTION SCREEN

INSTALLATION GUIDE

FRAME LED

ACTIVE

ww w . k a u b e r . e u

-2-

The FRAME series includes projection screens with a perfectly tight projection surface, stretched

over a stylish aluminium structure. This series is dedicated to demanding users with a special

purpose for home cinema.

IMPORTANT!!! INSTALLATION AND OPERATION NOTES

1. The screen should be installed in a location away from moisture and strong sunlight.

2. Use a soft, moistened cloth for cleaning. Do not use active cleaners. After cleaning, the screen should be

carefully wiped to remove any residual moisture.

3. A properly mounted screen must be absolutely levelled.

4. DIMENSIONAL TOLERANCE: Projection surface: ± 0.5% of the nominal size; components ±5mm

Package contents:

Quantity

Frame screen – frame elements

4 pcs

Mounting angle

8 pcs

M6x8 screw ("A" screw)

64 pcs

Washer 6.6

64 pcs

M6x12 set screw ("B" screw)

10 pcs

Magnet included with the screw

2 pcs

Surface fixing hooks

22 pcs

Wall mount bracket

2 pcs

Mounting pins for brackets (pin + screw)

4 pcs

Magnet holder

2 pcs

Holder mounting pins (pin + screw)

4 pcs

Projection surface

1 pc

Mounting wire

4 pcs

Frame profiles 2.5 cm wide

4 pcs

LED tape

2 pcs

DreamScreen device

1 pc

5V power supply

1 pc

HDMI cable

1 pc

ww w . k a u b e r . e u

-3-

SCREEN ASSEMBLY

1. Put all frame elements on a clean and level surface. Insert the steel angles into the frame profile as shown in

Fig. 2.

Fig.1 Fig.2

2. Insert the second frame to create a right angle, then fix the angle to the screen frame using the included "A"

screws (Fig. 3). Adjust the screen profiles to obtain a right angle and tighten the "A" screws (Fig. 4)

Fig.3 Fig. 4

ww w . k a u b e r . e u

-4-

3. If the frame profiles form a uniform surface, calibrate the profile using "B" screws, tightening the screws to

obtain a maximum level surface (Fig. 5), leaving space for the screws (Fig. 6), to which we will fix the black

frame profile in the next stage.

Fig.5 Fig. 6

4. After assembling the frame, unfold the projection surface so that the traces of surface sealing are visible at

the top. Straighten the surface (Fig. 7).

Fig.7

5. Slowly slide the steel rods attached to the set (Fig. 8) into the sealed pockets of the surface. Then place the

fixing hooks in the frame element (Fig. 9).

Fig.8 Fig.9

ww w . k a u b e r . e u

-5-

6. Tighten and fasten the surface to the frame according to (Fig. 10 to Fig. 13).

Fig.10 Fig.11

Fig.12 Fig.13

7. Put the black profile on the outside of the frame (Fig.14, Fig.15), then fasten with the "A" screw

Fig.14 Fig.15

ww w . k a u b e r . e u

-6-

8. Fix the attached magnet (Fig. 16) to the bottom profile of the frame (Fig. 17), at a maximum distance of

20cm from the edge of the frame.

Fig. 16 Fig.17

9. Degrease the space along the frame (Fig. 18) then, starting from one of the corners, stick the first stripe of

LED strip (Fig. 19). The second band of the LED strip should be stuck starting from the same corner of the

screen but in the opposite direction. (One LED strip should cover the two sides of our screen, (Fig. 20) the

excess strip should be cut off.) Write down the number of LEDs on each side (information will be necessary in

the configuration of active backlight).

Fig. 18 Fig. 19

Fig. 20

ww w . k a u b e r . e u

-7-

10. Attach the mount brackets (Fig. 21) to the wall, remembering that the hanging screen frame will be about 67

mm above the top edge of the bracket. Mounted brackets must be within 30 cm of the ends of the screen frame.

The screen profile after hanging is locked on the bracket, as shown in the illustration (Fig. 22).

After hanging on the brackets, it is possible to move the screen horizontally (to the left, to the right).

Fig. 21 Fig.22

11.The set includes two wall mount holders, designed to eliminate the distance from the bottom corners of the

screen to the wall (Fig. 22)

Advice! Pull the suspended frame of the screen at the bottom and fix the holder (Fig. 22) to the magnet with

(Fig. 16) Press the screen as much as possible to the wall. Then circle the shape of the holder on the wall, it will

serve as a pattern for attaching it (Fig. 23).

Fig.22 Fig.23

ww w . k a u b e r . e u

-8-

12. Diagram of connecting LED strips, voltage and HDMI cable to the DreamScreen device (Fig. 24)

Fig. 24

13. To set up active lighting, you will need the DreamScreen app, which you should download from the App

Store or Google Play

ww w . k a u b e r . e u

-9-

14. Connecting DreamScreen to a WiFi network

a) Android user

b) iOS user

The application will now connect to the DreamScreen device and add it to the WiFi network. This process may

take several minutes depending on the number of devices. During this process the LED on the device may flash

DreamScreen

ww w . k a u b e r . e u

-10-

Select your WiFi network

from the drop down menu

Add new device to the

WiFi network

Select your device, then go

forward by clicking

“Connue”

Enter the password to the

WiFi network

Select your WiFi network

from the drop down menu

Connect to the WiFi network of

the DreamScreen device

Add new device to the

WiFi network

Enter the password to the

WiFi network

Select your device, then go

forward by clicking

“Connue”

Otros manuales para FRAME Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pantalla de proyección de Kauber

Kauber

Kauber FRAME Series Manual de usuario

Kauber

Kauber CLR Manual de usuario

Kauber

Kauber FRAME LITE Series Manual de usuario

Kauber

Kauber INCEILING XL Manual de usuario

Kauber

Kauber InCeiling Manual de usuario

Kauber

Kauber Red Label Manual de usuario

Kauber

Kauber Blue Label XL Manual de usuario

Kauber

Kauber BLUE LABEL Manual de usuario

Kauber

Kauber MIDI Manual de usuario

Manuales populares de Pantalla de proyección de otras marcas

FART PRODUKT

FART PRODUKT Standard SCREEN Manual de usuario

Draper

Draper E Series Manual

Elite Screens

Elite Screens Elite Tripod Series Manual de usuario

Laarhoven

Laarhoven Companion II Manual de usuario

Renogy

Renogy RMS-LFPS-US Manual de usuario

Da-Lite

Da-Lite ExecutiveElectrol Manual de usuario

Samsung

Samsung S*H65* Manual de usuario

FONESTAR

FONESTAR PPTR-43100-FA Manual de usuario

Slide Clear

Slide Clear Varro XL Manual de usuario

Elite Screens

Elite Screens M85XWS1-SRM Manual de usuario

OS РХ-090Н Manual de usuario

Niko

Niko 10-845 Manual de usuario

Speaka Professional

Speaka Professional 2357532 Manual de funcionamiento

Sima

Sima XL-72 Manual de usuario

Jasic

Jasic EVO 2.0 ET-200P Manual de usuario

Elite Screens

Elite Screens Starling 2 Series Manual de usuario

InFocus

InFocus SC-WALL GRY-92H Manual

Barco

Barco OverView MVL-615 Manual de usuario