Kanto FMC4 Manual de usuario
Supporting your digital lifestyle™
Supplied Parts and Hardware
3
Wall Plate
• 3/16” wood drill bit
• 7/16” masonry bit (for concrete installs)
• Socket set
• Phillips screwdriver
• hammer (for concrete installs)
• carpenter’s level
• stud nder
Required Tools
A: M5 x 15mm
Screw
C: M6 x 15mm
Screw
B: M5 x 25mm
Screw
D: M6 x 25mm
Screw
E: M8 x 15mm
Screw
G: M8 x 35mm
Screw
F: M8 x 25mm
Screw
K: Lag Bolt
M: 5mm Allen Key
N: 6mm Allen Key
L: Concrete Anchor
x4 x4 x4
J: Plastic Spacer
x4 x6
I: Lag Bolt Washer
x6 x6
x4 x4
x4 x4
x4
H: Washer
O: Quick-Lock
Bracket Arm
P: Locking
Bracket Arm
Supporting your digital lifestyle™
7
Step 5: Tilt the TV
Loosen the tilt bolts on both sides of the mount plate using
the 5mm Allen Key (M), as shown in Diagram G. Tilt the TV to
the desired angle and tighten the tilt bolts.
Step 6: Cable Management
Route your TV cables using the wire management
covers installed to the underside of the FMC4 mount
arms, as shown in Diagram H. The wire management
cover is located on the opposite side of the front arm.
You can remove the screws and mount each of the wire
management covers on the opposite side, if desired.
Diagram G
Tilt Bolts
Diagram H
Tabla de contenidos
Otros manuales de Soporte de TV de Kanto
Kanto
Kanto PT200 Manual de usuario
Kanto
Kanto PS300 Manual de usuario
Kanto
Kanto L100 TV Manual de usuario
Kanto
Kanto CM600 Manual de usuario
Kanto
Kanto PS400 Manual de usuario
Kanto
Kanto RCT190 Manual de usuario
Kanto
Kanto RCAS160 Manual de usuario
Kanto
Kanto MTM82PL Manual de usuario
Kanto
Kanto L102 Manual de usuario
Kanto
Kanto PMX700 Manual de usuario
Kanto
Kanto F3760 Manual de usuario
Kanto
Kanto PT300 Manual de usuario
Kanto
Kanto MTM55 Manual de usuario
Kanto
Kanto MTM82PL Manual de usuario
Kanto
Kanto SB100 Manual de usuario
Kanto
Kanto MKT65 Manual de usuario
Kanto
Kanto FMX2 Manual de usuario
Kanto
Kanto L102 Manual de usuario
Kanto
Kanto SDX600 Manual de usuario
Kanto
Kanto PS350 Manual de usuario
