Kaman SERIES 8000 Manual de usuario
Reference Manual
SERIES 8000
ENCLOSURES
Copyright © 2000 Kaman Aerospace Corporation
PART NO: 860093-001 Measuring & Memory Systems
Last Revised: 3/16/01 217 Smith Street
Middletown, CT 06457
www.kamansensors.com or 860-632-4442
Series 8000 Enclosures
Reference Manual
1/2 Rack Instrumentation Case (3U/42HP)
3/4 Rack Instrumentation Case (3U/63HP)
Full 19" Subrack (3U/84HP)
Kaman Measuring Systems
P/N 860093-001, Revised 3/16/01
4
Series 8000 Systems
The Series 8000 is a modular packaging system for Kaman Instrumentations line of inductive
displacement transducer electronics. The Series 8000 enclosures integrate various measuring
channels, function cards, power supplies, and displays into a coherent application specific
industrial package. Sensors for the measuring channels are available that measure
displacements in the microinch/nanometer ranges as well as sensors that can make accurate
displacement measurements at up to 1000oF. Function cards are available that can take the
displacement measurement and process the signal to measure ID, OD,runout, or out of
tolerance conditions. The versatility and flexibility of the 8000 system is virtually endless.
This manual is designed to help put it all together for the specific system you have purchased.
features: Eurocard/Eurorack format
Up to 12 channel systems
Integral rear mounted power supplies
Terminal block I/O
Optional 1/8 DIN display modules
Multi-channel Scalable displays
Inductive sensing technology
Plug-in function modules for:
Dynamic signal measurement
Setpointwindowcomparators
Summation for thickness/ID/OD measurement
4-20 mA outputs
5
TableofContents Page
Getting Started Quickly 7
Series 8000 Enclosures 8
Subracks 8
Instrument Enclosure 13
NEMA 17
Integral Power Supply 18
Input Voltage Selection (120VAC/240VAC) 19
The Internal Back Plane 23
Internal Back Plane Connectors 25
Adding Additional Modules 26
The Back Panel 29
Back Panel Power Input 29
Back Panel I/O and Labeling 30
Back Panel Sensor Inputs 31
The Front Panels 32
Module Side Panel Labeling 32
MCD-8000 and 1/8 DIN Panel Mounted Displays 33
Using the Multi-Inputs 35
Input wiring to the Display 36
0-10VDC Display Input Configuration 37
+/-5VDC Display Input Configuration 37
+/-10VDC Display Input Configuration 37
4-20mA Display Input Configuration 38
Calibration 39
Appendix A -- Measuring Channel Configuration 43
Basic Measuring Channel Configuration 44
Appendix B -- Function Card Configuration 45
VC8000 Voltage to Current Converter Configuration 46
SC8000 Summation/Comparator Configuration 47
DY8000 Dynamic Module Configuration 48
SP8000 Dual Set Point Configuration 49
Appendix C -- MCD-8000 Display Specifications 50
MCD 8000 Functional Specifications 50
MCD 8000 Performance Specifications 51
MCD 8000 Environmental/Physical Specifications 51
Appendix D -- Replacement or Expansion Parts 52
Appendix E – Warranty, Customer Service and Service/Repair 54
6
ListofIllustrations Page
fig. 1 -- Full 19" Subrack Rear/Front Outline drawing 9
fig. 2 -- Full 19" Subrack Top View Outline Drawing 10
fig. 3 -- Full 19" Subrack Rear/Front with Display 11
fig. 4 -- Full 19" Subrack Rear/Front with Dual Display 12
fig. 5 -- 1/2 Rack with Display Outline Drawing 14
fig. 6 -- 1/2 Rack Outline Drawing 15
fig. 7 -- 3/4 Rack with Display Outline Drawing 16
Table 1 -- Power Supply Specifications 18
fig. 8 -- Power Entry Module 19
fig. 9 -- Accessing the Voltage Selector Card 19
fig. 10 -- Voltage Selector Card Orientation 20
fig. 11 -- Top View of Main board on display. 22
fig. 12 -- Physical Eurocard Pin Locations 23
Table 2 -- Electrical Standards for Pinout 24
fig. 13 -- Single Coil Coaxial 25
fig. 14 -- Dual Coil Coaxial 25
fig. 15 -- Back Plane Template 28
fig. 16 -- Power Entry Module 29
Table 3 -- Terminal Block Labeling 30
fig. 17 -- Back Panel Sensor Inputs 31
fig. 18 -- Typical Module Side Panel Labeling 32
fig. 19 -- Single 1/8 DIN Mounting Panel 814873-001 33
fig. 20 -- Dual 1/8 DIN Mounting Panel 814873-002 34
fig. 21 -- MCD 8000 Front Panel 35
Table 4 -- Displayed Outputs 35
fig. 22 -- MCD 8000 Input Wiring 36
fig. 23 -- MCD 8000 Power Wiring 36
fig. 24 -- Voltage/Current Input Dip Switch 38
fig. 25 -- Diodes For Loop Continuity in Current Mode 38
fig. 26 -- MCD 8000 Adjustment Switches 40
fig. 27 -- Process/Scaling Dip Switch 40
fig. 28 -- Button Function Legend 42
Table 5 -- MCD-8000 Error Message Table 42
Table 6 -- Series 8000 Sensor Family 43
fig. 29 -- Basic Measuring Channel 44
fig. 30 -- Module Reference Dimensions 45
fig. 31 -- VC8000 Voltage to Current Converter 46
fig. 32 -- SC8000 Summation/Comparator 47
fig. 33 -- DY8000 Dynamic Module 48
fig. 34 -- SP8000 Dual Set Point 49
7
Getting Started Quickly
The Series 8000 rack systems are typically prewired and set up at the factory with all
measuring channels and function cards installed. To get started with the 8000 system you will
need to:
aInstall the sensors in the application or cal fixture
bConnect the sensors to the enclosure (see page 30)
cConnect the power cord and turn on the unit
dIf you have a display see page 32
eIf you have no display see page 29 on back panel I/O
As with any complex electronics system you should thoroughly familiarize yourself with all
manuals dealing with the product. Included with the system are the appropriate manuals for
any measuring channels and function cards purchased. Please refer to these manuals for
specific information.
Warning: The integral power supply in racks utilize high voltage
(120 or 240VAC). Unplug the unit before servicing.
8
Series 8000 Enclosures
Subracks
The subrack is a 19" wide frame having solid side panels and horizontal rails across the top
and bottom to hold the system modules in place. Use of a subrack enables you to install your
Series 8000 system into a standard 19" test equipment rack, or bolt it into a NEMA enclosure.
The subrack has a built in 120VAC/240VAC selectable power supply to provide +/-15VDC at 1
amp. The subrack also can be configured with either one or two MCD 8000 display modules
that have up to six selectable inputs. The display modules draw no current from the +/-15 volt
supply.
Full 19" Sub-Racks - 3U/84HP Instrumentation Subrack
Part Number Configuration
853705-000 No display meter, 12 available positions
853705-001 One display meter, 9 available positions
853705-002 Two display meters, 9 available positions
9
fig.1 – Full 19” Subrack Rear/Front Outline Drawing
10
Fig. 2 – Full 19” Subrack Top View Outline Drawing
Tabla de contenidos
