K-Mate BTH109A Manual de usuario

BTH109A

True Wireless Bluetooth Headset

User’s manual

Contents

Brief introduction…………...…………………………..…... 1

Before use……………………………………………………. 1

1. Overview…………………………………………………...……1

2. Charging for headset..……………………………………………2

Getting started……..…………………………………………3

1. Wearing headset............................................................ .........3

2. Use one piece earbuds...............................................................3

3. Use two earbuds..........................................................................5

4. Earbuds pairing/connecting........................................................6

5. Function operation-one earbuds connecting with cellphone......7

6. Function operation-two earbuds connecting with cellphone......8

7. Battery display........................................................................ ......9

8. LED indicator……………………………………………….....9

9. Factory Reset……………………………………………..…..10

Care and maintenance……………………………..……….10

FAQs……………………………………...…………………..11

Specification……………………………...………………..…12

Welcome to use this True Wireless Bluetooth headset, BTH109A. Please

read this user’s manual carefully before use.

Brief introduction

BTH109A is a True Wireless Bluetooth Headset without any wire,each piece

comes with one Mic that can be used individually or be used together for

stereo sound.The headset support music and calling function.

Before use

1. Overview

MFB touch-button

LED indicator

Microphone

Power on/off button

Ear tips

Four different size ear tips

Charging jack

2. Charging for headset

When the headset is low power, the headset emits “please charge”every 2

minutes and the red LED flashes instead of blue LED. Please recharge the

battery of the headset.

The way of charging as following:

Using USB cable

1. Plug the USB charging cable to headset charging jack

2. Plug another side of cable to the USB port of PC

Red light on: Charging

Blue light on: Finish charging

3. It will takes about 1.5 hours to finish charging

Remarks:

1) The battery is recyclable.

2) Batteries (battery pack or batteries installed) shall not be exposed to

excessive heat place, such as sunshine, fire or the like.

Getting started

1. Wearing headset

a. Choose the suitable size ear tips

b. Wear the headset of L and R accordingly,adjust each earbuds for your ear

to get best experience

Left ear Right ear

2.Use one earbuds

In this mode, only one earbuds of the headset connecting with device.

1. Power on

Press power button about 3s and release it till blue LED on,and earbuds

prompt “Power on”.

2.Pairing

a.Power off mode:Press power button about 6s and release it till red LED

and blue LED flash alternately,and earbuds prompt “Pairing”

b.Standby mode without connecting:Press power button about 2s and release

it till red LED and blue LED flash alternately,and earbuds prompt”Pairing”.

3.Connecting

Make sure the earbuds in pairing mode, search the Blutooth name and

connect it.

Bluetooth name : BTH109AL is left earbuds,BTH109AR is right earbuds

4.Power off

Press power button about 6s and release it till red LED on,and earbuds

prompt “Power off”.

Remark:

The earbuds will automatically connecting with the latest Bluetooth

device when power on

The earbuds will automatically switch to standby mode if disconnect

with device,and will power off automatically after 5 minutes to save

power.

The function operation are same for each earbuds.

3.Use two earbuds

In this mode use two earbuds simultaneously to enjoy stereo sound. There

are two ways for both earbuds to connect.

The first way as below:

1.Power on both earbuds, then they will connecting with each other

automatically. After connected successfully, the headset will prompt

“Master”, “Slave”.

2.Press power button of “Master”headset about 2s to make it into pairing

mode.

3.Active Bluetooth function in cellphone and connect headset

name”BTH109AL”/(BTH109AR) in the list.

The second way as below:

Operate one of earbuds to connect with cellphone, power on the other

earbuds, then the two earbuds will connect with each other automatically.

Please note that the headset which connect with cellphone is Master headset,

the othe is Slave headset.

Remarks:

Pairing mode keeps 2 minutes,the headset will switch to standby mode if

no device can be connected,and they will power off automatically after 3

minutes.

After connected successfully, the two headset (Master/Slave) will

remember each other. The headset will connecting with the latest device

automatically when power on.

The headset can reconnecting with devices automatically if return back

to effective range within 5 minutes.

4.Earbuds pairing/connecting

Please use this step if two headset can not be connect with each

other or you need to change the Master headset.

1.Power on two headset and make it enter pairing mode, red LED and blue

LED flash alternately .

2.Press power button about 2s in one of earbud to enter search mode,red

LED and blue LED slow flash. The headset which connect with cell phone

is Master headset.

3.Two earbuds will pairing and connecting. After two earbuds connecting,

the Master headset will enter pairing mode autiomatically.

Remarks:

In normally the two earbuds will connecting automatically once power

on,which set in factory.

You can connect the two earbuds according above operation if they failed

connecting.

5.Function operation-one earbuds connecting with cellphone.

a.Answer /end a call

Incoming calling(blue LED quickly flash),click touch button once will

answer or end a call.

Click once

b.Reject calling

Incoming calling(blue LED quickly flash), long press touch button and

release it till hear prompt tone “DUDU”.

Long press about 1 second

c.Voice assistant

After connect with cellphone(blue LED flash twice every 5s),then press

touch button about 5s can active voice assistant like Siri. When you long

press touch button 2s under music mode, please not realease if you will hear

a prompt tone.

Long press about 5 seconds

d.Playing/Pause

Connecting with cellphone,double click touch button will play music,double

click again will pause playing.

Double click

e.Next song

Press touch button about2s under music mode, release it until hear a prompt

tone.

Long press about 2s

6.Function operation-two earbuds connecting with cellphone

a.If two earbuds connect with cellphone,one of earbuds power off,the other

one will turned off also.

b.If two earbuds connect with cellphone,operate any one earbuds can control

playing/pause/nex song/voice assistant.

Last song: under music mode, long press touch button of left earbud about

2 seconds, release it until hear a prompt tone.

Next song: under music mode, long press touch button of right earbud about

2 seconds, release it until hear a prompt tone.

Tabla de contenidos

Manuales populares de Auriculares de otras marcas

Sena

Sena SMH10 Manual de usuario

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manual de usuario

Sennheiser

Sennheiser EPOS ADAPT 230 Manual de usuario

Doro

Doro Flexus HS2005 Manual de usuario

GE 98971 Manual de usuario

Hama

Hama 00184070 Manual de usuario

Plantronics

Plantronics Blackwire 3200 Series Manual de usuario

Blue Tiger

Blue Tiger Advantage PLUS Manual de usuario

Jawbone

Jawbone Icon Manual de usuario

Jabra

Jabra FR 20 Manual de usuario

Roxcore

Roxcore Flow A+ Manual de usuario

Turtle Beach

Turtle Beach XP 510 Manual de usuario

Philips

Philips SHB6101 Manual de usuario

Jabra

Jabra PRO 9460 Duo Manual de usuario

HyperX

HyperX HyperX Cloud Flight Manual de usuario

Bose

Bose MIE2 Mobile Manual de usuario

Jabra

Jabra Steel Manual de usuario

HyperX

HyperX cloud ii Manual de usuario