JVC GC-FM2 Manual de operación y mantenimiento
•
For more details on the operations, refer to the“Detailed
User Guide”in the built-in memory. (P.6)
•Using the Eye-Fi card, refer to the“Detailed User Guide”
in the built-in memory. (P.42)
®
HD MEMORY CAMERA
GC-FM2
GC-WP10
Basic User Guide
Waterproof with
Audio Recording
AA
AA
2
3
When discarding batteries, environmental problems
must be considered and the local rules or laws
governing the disposal of these batteries must be
followed strictly.
The apparatus shall not be exposed to dripping or
splashing. (GC-FM2 only)
Do not use this equipment in a bathroom or places
with water. Also do not place any containers lled
with water or liquids (such as cosmetics or medicines,
ower vases, potted plants, cups etc.) on top of
this unit. (If water or liquid is allowed to enter this
equipment, re or electric shock may be caused.)
Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
(GC-FM2 only)
CAUTION:
•
If you notice smoke or a peculiar smell coming from
the camcorder or AC Adapter, shut it down and
unplug it immediately. Continue using the camcorder
or AC Adapter under these conditions could lead to
re or electric shock. Contact your JVC dealer. Do not
attempt to repair the malfunction yourself.
•
To prevent shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualied
personnel.
NOTES:
•
The rating plate and safety caution are on the bottom
of the unit.
•
The serial number plate is on the side of the unit.
CAUTION:
The mains plug shall remain readily operable.
•
Remove the mains plug immediately if the camcorder
functions abnormally.
WARNING:
The camcorder should not be exposed to excessive heat
such as direct sunshine, re or the like.
If you use this unit as a music player, excessive sound
pressure from earphones and headphones can cause
hearing loss.
If a malfunction occurs, stop using the camcorder
immediately and consult your local JVC dealer.
When the equipment is installed in a cabinet or on a
shelf, make sure that it has sucient space on all sides
to allow for ventilation (10 cm or more on both sides,
on top and at the rear).
Do not block the ventilation holes. (If the ventilation
holes are blocked by a newspaper, or cloth etc. the
heat may not be able to get out.)
4
5
— Maintenance After Use —
•
After use in water or when dusted with sandy
dust, rinse the camcorder as soon as possible
with still fresh water in basin. (GC-WP10 only)
•
You cannot replace the built-in battery yourself.
Consult your JVC dealer to replace it.
If this symbol is shown, it is only valid
in the European Union.
Cautions
— Read Before Use —
Notes on this equipment
•
The camcorder shall not be exposed to excessive
heat such as direct sunshine, re or the like.
The built-in battery may explode if it gets heated up.
•
The battery is not charged when purchased.
Charge the battery before using it for the rst
time.
•
Do not drop this unit or subject it to excessive
shock or vibration.
•
Before recording, be sure to conduct a trial
recording.
•
Store the recorded data periodically on computer.
JVC shall not be liable for any damage or loss of data.
•
Do not press against the surface of the screen
with force or subject it to strong impact.
Doing so may damage or break the screens.
•
When using the unit in a low temperature
environment (10°C or below), the operating
time may be shortened, or it may not function
properly.
Waterproof Function (GC-WP10 only)
This camcorder is equipped with a waterproof function
corresponding to JIS (Japanese Industrial Standards) IPX8.
This camcorder can make recordings in marine water and
fresh water. The waterproof is tested in accordance with
JVC test standard and it does not assure damage-free or
trouble-free operation.
The waterproof cannot be guaranteed if the camcorder
is subject to impact. Consult with the dealer if the
camcorder is subject to impact.
•
Do not use this product in water deeper than 3 m
or for longer than 30 minutes.
•
Do not use in the following locations:
Place with higher water pressure than specied,
in hot springs or water of 40°C or higher.
•
Supplied accessories are not waterproof.
gMalfunction due to water immersion and other
damages caused by misuse by the customer is not
covered by warranty.
Before use, be sure to read the“Detailed User Guide”
in the built-in memory with the camcorder.
6
7
Accessories
•Dedicated AV Cable
•USB Cable
(GC-WP10 only)
Type A – Type B Mini
•Hand Strap
(GC-WP10 only)
•USB Extension Cable
(GC-FM2 only)
•Core Filter
Viewing the "Detailed User Guide”in the built-in memory
• Charge the camcorder. (P.10)
• Turn on the computer.
• Press the button for about
1 second to turn on the camcorder.
• Connect the camcorder to a
computer.
gWindows PC
![Auto Play] screen appears.
#Double-click [Open folder to view les].
$Double-click [Start.pdf ].
You can see the “Detailed User Guide”from “The
Users Manual for Camera” displayed in the lower
right portion of the screen of the supplied software
(LoiLoScope EX).
gMac Computer
!Double-click [PICSIO_APP] on the desktop.
#Double-click [Start.pdf ].
If you read the manual repeatedly, we recommend
that you copy [Guidebook] folder and [Start.pdf] to
your computer.
Preparation:
USB cable
Computer
GC-WP10
USB connector on GC-FM2 (P.8)
8
9
Names of Components Inserting an SD Card
Operations are conrmed on the
following cards (class 4 or higher)
with capacity 2 GB to 64 GB.
Panasonic, TOSHIBA, SanDisk, ATP,
Eye-Fi.
gGC-WP10
gGC-FM2
,Microphone
GC-WP10: Stereo/GC-FM2: Monaural
-AV Connector
GC-WP10: also serves as
Headphones Connector
.SD Card Slot
/USB Connector
0HDMI Mini Connector
1USB Connector Lever**
Press-and-hold the lever and slide
2Cover
** GC-FM2 only
!LCD Monitor (Touchscreen)
#Speaker
$Power Button [ ]
%SCREEN LOCK Button*
&
Video/Still image Select Button [ ]
*
(POWER/CHARGE Lamp
)Recording Button*
*Tripod Mounting Socket
+Lens
* GC-WP10 only
• To protect data, do not touch the
terminals of the SD card.
• Be sure to insert the SD card with the
power turned o.
• If you play back video/still image/audio
on an SDXC card using a computer,
check the “Detailed User Guide” (P.13) in
the built-in memory before inserting the
SDXC card into the computer.
#
$
(
)
!
+
,
*
.
/
02
-
%
&
#
+
$
!
*
/0
2
-
,
.
10
11
1Turn o the camcorder by pressing
the button for about 1 second.
• The power lamp goes out.
2Connect the camcorder to a computer.
Charge Lamp Blinks: Charging
Goes out: Charging nished
Charging Time Approx. 3 h
• When the charging is nished, disconnect the
camcorder from the computer.
Charging the battery
NOTE
• Charging is not possible while the camcorder is turned on.
• Make sure that the computer is turned on during charging.
• You cannot record or play back video/still image/audio le while the camcorder is
connected to a computer.
1Press the button for about 1 second to turn on
the camcorder.
2Touch [YES] when the [SET DATE/TIME!] screen
appears.
3Set the date and time, then touch [SET].
• Touch and select the day, month, year, hour and
minute, then touch to make adjustments.
4Set the region where you live and touch [SAVE].
• Touch to make adjustments.
NOTE
• When a [SET DATE/TIME!] message does not appear on the screen, or
you want to adjust the clock, touch on the Top Menu, then touch
[CLOCK ADJUST]. (Refer to the “Detailed User Guide” (P.18) in the
built-in memory.)
Setting the Date and Time
SAVE
LONDON
CASABLANCA
LISBON
RETURN QUIT
RETURN QUIT
SET
CLOCK SETTING
USB cable
Computer
GC-WP10
USB connector on GC-FM2 (P.8)
12
13
Preparation:
• Touch or to select mode on the Top Menu.
• Touch to select the playback mode.
Playback Video/Still Image
Preparation: Touch or on the Top Menu to select mode.
gVideo Recording
1Touch to start recording.
• Touch again to stop recording.
• GC-WP10 only: You can make recording also with a press of
the Recording button.
gStill Image Recording
1Touch to shoot still image.
•
You can shoot continuously by touching and holding the
button.
• GC-WP10 only: You can shoot still image also with a press of
the Recording button.
• To select the Video or Still image mode again, touch to return to the Top Menu.
• Touch on the Top Menu to change the video quality.
• To save electricity, the power is turned o automatically when it is not operated for
5 minutes.
Recording Video/Still Image
1Touch the video or still image to
play back from the index screen,
then start play.
• Touch or touch and drag
thumbnails left and right to go to
the next/previous page.
• Touch the screen and then to
stop the playback.
gTo Delete Video/Still Image
!
Touch at the index screen of video/still image.
#
Touch and select the file to delete, then touch [SET].
14
15
gAudio Recording
Preparation: Touch on the Top Menu to select the recording mode.
1Touch to start recording.
• Touch again to stop audio recording.
gAudio Playback
Preparation: Touch to select the playback mode.
1Touch the desired audio le to begin
playback.
gDelete Audio Files
!
Touch at the index screen of audio files.
#
Touch and select the file to delete, then touch [SET].
Audio Recording/Playback (GC-WP10 only)
Preparation: Select video recording or still image recording mode.
Temporarily disable the touchscreen so that it will not malfunction with the
water pressure.
1Press the SCREEN LOCK button for more than 1 second.
• appears on the screen.
• Press the SCREEN LOCK button again, for more than 1 second, to
turn o and activate the touchscreen.
•
Pressing the button will toggle the operation between Video Recording
and Still Image Recording.
NOTE
• Also refer to the“Detailed User Guide“ (P.25) in the built-in memory.
• Before using in water, close the terminal cover rmly.
• Do not use this camera in water deeper than 3 meters or in water for longer than
30 minutes.
• After use, rinse the camcorder with fresh water, wipe the water away and dry in a well-
ventilated place out of direct sunlight.
Using the Camcorder in Water (GC-WP10 only)
16
1Connect the camcorder to a
TV.
2Switch to the TV’s external
input connector.
3Start the playback of video/
still image. (P.13)
NOTE
• Also refer to instruction manual of the
TV.
Preparation:
• Charge the camcorder before
saving les.
• Turn on the camcorder.
1Connect the camcorder to a
computer.
Windows
PC
Double-click [PICSIO_SD]
in [My Computer] from the
Start menu.
Mac
computer
Double-click [PICSIO_SD] on
the desktop.
2Copy video/still image/
audio les from the [DCIM]
folder of the camcorder.
Viewing Files on TV
Saving Files on a computer
AV cable (provided) TV
HDMI cable (optional)
© 2010 Victor Company of Japan, Limited
AA 0810YMH-AL-VM
Otros manuales para GC-FM2
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Videocámara de JVC
JVC
JVC GR-D93US Guía del administrador
JVC
JVC Everio GZ-MS120 Manual
JVC
JVC GR-D248 Manual de usuario
JVC
JVC GR-DVM828 Manual de usuario
JVC
JVC EverioR GZ-R495 Manual de operación y mantenimiento
JVC
JVC Everio GZ-HD500U Manual de operación y mantenimiento
JVC
JVC 0303-MK-ID-SN Manual de usuario
JVC
JVC GZ-MG67US Guía de inicio rápido
JVC
JVC GR-FX15EK Manual de usuario
JVC
JVC GR-X5US Guía del administrador
JVC
JVC GY-HM620E Manual de usuario
JVC
JVC GR-AXM25 Manual de usuario
JVC
JVC ProHD GY-HMZ1U Manual de operación y mantenimiento
JVC
JVC GR-DVL317U Manual de usuario
JVC
JVC HD200CHU - GY Camcorder - 1080i Manual de usuario
JVC
JVC GR-SX897 Manual de usuario
JVC
JVC Camcorder Manual de usuario
JVC
JVC GR-FXM55 Manual de usuario
JVC
JVC DZ-VCA1SE Manual de usuario
JVC
JVC GR-HD1 Manual de usuario
Manuales populares de Videocámara de otras marcas
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario
MYDLINK
MYDLINK DCS-6100LH Manual de usuario
Sony
Sony video Hi8 Handycam CCD-TR555 Manual de usuario
SECURECOM
SECURECOM V-5014B Manual de usuario
Panasonic
Panasonic HDC-SD100 Manual de usuario
Sharper Image
Sharper Image U-VIDEO Manual de usuario
