JVC ADIXXION GC-XA2 Manual de usuario
T
M
ACTION CAMERA
GC-XA2 U
Basic User Guide
●Before use, be sure to read "Safety Precautions" (p.2) and
"Cautions" (p.3) to use the product correctly.
●Malfunction due to water immersion and other damage caused
by misuse by the customer is not covered by warranty.
For more details on operating this product, please refer to the
"Detailed User Guide" at the following website.
■http://manual3.jvckenwood.com/
Detailed User Guide
EN
LYT2658-001A
For Future Reference:
Enter the Model No. (located on the
bottom of the camera) and Serial No.
(located on the battery pack mount of
the camera) below.
Model No.
Serial No.
ENGLISH
FRANÇAIS
ESPAÑOL
BC mark means complies with Energy Efficiency Law.
2
Safety Precautions
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
NOTES:
●The serial number plate is on the
battery mount of the camera.
CAUTION:
The mains plug shall remain readily
operable.
●Remove the mains plug immediately
if the camcorder functions
abnormally.
WARNING:
The camcorder should not be exposed
to excessive heat such as direct
sunshine, fire or the like.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation
openings. Install in accordance
with the manufacturer’s
instructions.
7. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus
(including amplifiers) that produce
heat.
8. Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
9. Only use attachments/accessories
specified by the manufacturer.
10. Unplug this apparatus during
lightning storms or when unused
for long periods of time.
11. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
if the power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
If a malfunction occurs, stop using
the camcorder immediately and
contact www.jvc.com or by phone at
1-800-252-5722
Changes or modifications not
approved by JVC could void the
user’s authority to operate the
equipment. This equipment has
been tested and found to comply
with the limits for a Class B digital
device, pursuant to Part 15 of the
FCC Rules. These limits are designed
to provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of
the following measures: Reorient
or relocate the receiving antenna.
Increase the separation between the
3
equipment and receiver. Connect
the equipment into an outlet on a
circuit different from that to which
the receiver is connected. Consult the
dealer or an experienced radio/TV
technician for help.
Declaration of Conformity
Model Number : GC-XA2BU
Trade Name : JVC
Responsible party : JVC AMERICAS
CORP.
Address : 1700 Valley Road Wayne, N.
J. 07470
Telephone Number : 973-317-5000
This device complies with Part 15
of FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.
CAN ICES-3B/NMB-3B
Power Consumption: < 520mA
(Working Current)
Cautions
— Read Before Use —
Notes on this equipment
●The camera shall not be exposed
to excessive heat such as direct
sunshine, fire or the like.
The battery may explode if it
becomes hot.
●The battery is not charged when
purchased. Charge the battery
before using it for the first time.
●Do not or subject it to excessive
shock or vibration.
●Before recording, be sure to
conduct a trial recording.
●Store the recorded data
periodically on computer.
JVC shall not be liable for any
damage or loss of data.
• Do not press the surface of the
screen forcefully or subject it to
strong impact.
Doing so may damage or break the
screen.
• When using the unit in a low
temperature environment (-10°C
(14°F) or below), the operating
time may be shortened, or it may
not function properly.
Precautions on Using Wi-Fi
Cautions on the Wi-Fi Function
• Operation is not guaranteed on all
devices.
• This function is not designed for
disaster or crime prevention.
• Communication may not be carried
out properly near radio equipment
or broadcasting stations. In this case,
change the location accordingly.
• Radio wave interference by
Bluetooth devices
Bluetooth devices make use of the
same frequency bandwidth (2.4
GHz) as that of Wi-Fi devices. Using
this product near such devices may
cause radio wave interference, and
result in a drop in communication
speed or connection failure. In this
case, turn off the power of devices
that are not in use.
Wireless LAN security
An advantage of wireless LAN is
that instead of using a LAN cable,
it transmits information using
radio waves, thus enabling a LAN
connection to be established within
the area covered by the radio waves.
However, as radio waves penetrate
through objects (such as walls)
within the range that they cover,
security issues, such as interception
of transmission or illegal access,
may arise if security settings are
not configured. Before you connect
4
to the network in a wireless LAN
environment, read through the
instruction manual for the wireless
LAN device in use, and configure the
security settings accordingly.
Failure to do so may increase the risk
of personal information such as user
names, passwords, and the content
of your e-mails being intercepted, or
illegal access to the network.
• Due to the design of wireless LAN,
note that security may be breached
by unusual or unforeseeable means.
• For more details on wireless LAN
and network security, please consult
the manufacturer of your wireless
LAN device.
• JVC shall not be liable for any
security issues, problems, damage
or losses arising from the use of this
feature.
Radio Waves Used by this Product
This product makes use of radio
waves in the ISM band (2.4 GHz).
Although a radio station license is
not required to use this product,
please take note of the following.
• Do not use this product near the
following places
• Industrial, scientific, or medical
equipment, such as microwave
ovens and pacemakers
• Specified low-power radio
stations that do not require a
license
• Bluetooth devices
Equipment, such as the above
mentioned devices, makes use of
the same frequency bandwidth
as that of Wi-Fi.
Using this product near the above
equipment may cause radio
wave interference, and result in
communication failure or a drop
in communication speed.
• Avoid using this product near a
TV or radio set.
TV or radio sets make use of a
radio wave frequency bandwidth
that is different from that of Wi-
Fi, and therefore has no effect on
communication by this product or
the TV/radio set.
However, when a TV/radio set is
placed close to a Wi-Fi product,
electromagnetic waves emitted by
the Wi-Fi product may cause noise
to occur in the sound or images of
the TV/radio.
• Radio signals are unable to
penetrate through reinforced
steel, metal, or concrete.
The radio waves used by this
product are unable to penetrate
through reinforced steel, metal, or
concrete materials.
It may difficult for communication to
be established if two rooms or floors
are separated by these materials.
*Communication may also become
weaker when there are human
subjects or parts of the body in
between the Wi-Fi devices.
• Do not connect to wireless
networks that you do not have
authorization for.
Once connected, it may be
considered as unauthorized access
and legal actions can be taken
against you.
• Do not use the Wi-Fi function
outside the country of purchase.
Depending on the country, there
may be restrictions on the use of
radio waves and any violations could
be punishable by law.
• Exporting/Bringing the Unit
Overseas
Permission from the U.S.
government may be required when
bringing the unit to an export
controlled country set by the U.S.
government
(such as Cuba, Iraq, North Korea,
Iran, Rwanda, and Syria. As of June
2012).
For more information, consult the
U.S. Embassy Commercial Service.
5
Waterproof Function
This camera is equipped with a
waterproof function.
This camera can make recordings in
marine water and fresh water. We
recommend selecting [Blue (marine)]/
[Green (marine)] in White Balance for
underwater scenes. The waterproof
function is tested in accordance with
JVC test standards and it does not
assure damage-free or trouble-free
operation. (The waterproof functions
not evaluated by UL.)
The waterproof function cannot be
guaranteed if the camera is subject
to impact.
Waterproof Function : IEC Standard
publication 529 IPX8.
• The cover for the ports must be
firmly closed.
• Do not use this product in water
deeper than 5 m (16.4 ft).
• Do not use in the following
locations:
Places with higher water pressure
than specified, in hot springs or
water of 40°C (104°F) or higher.
• Supplied accessories are not
waterproof.
■Malfunction due to water immersion
(IPX8 5m(16.4ft) 30 minutes) and
other damage caused by misuse
by the customer is not covered by
warranty.
Before use, be sure to read the
“Detailed User Guide” at our
website.
— Maintenance After Use —
• After use in water or a dusty
environment, rinse the camera as
soon as possible with still fresh
water in a basin.
• Always keep the lens clean and wipe
the water droplets off the camera
with a soft and dry cloth.
• Air-dry the camera completely in a
shaded area.
■The waterproof function of the
ports is not guaranteed in all
environments or conditions (IPX8
5m (16.4ft) 30 minutes).
—CAUTION—
To maintain compliance with
FCC’s RF exposure guidelines,
use only the supplied antenna.
Unauthorized antenna,
modification, or attachments could
damage the transmitter and may
violate FCC regulations. This device
complies with Part 15 of the FCC
Rules. Operation is subject to the
following two conditions:
(1) This device may not cause
harmful interference.
(2) This device must accept any
interference received, including
interference that may cause
undesired operation.
ATTENTION: The product you
have purchased is powered by
a rechargeable battery that is
recyclable.
Please call
1-800-8-BATTERY for
information on how to
recycle this battery.
(USA and Canada only)
If this symbol is shown,
it is only valid in the
European Union.
CAUTION:
• Dispose of used batteries
according to the instructions.
• Risk of explosion if battery is
replaced by an incorrect type.
6
Checking the Accessories
Battery
(BN-VH105)
USB cable
Wide flexible mount
(Pod part/Base part)
•Remove any dirt or moisture before attaching accessories.
•
Once attached, the flexible mount cannot be removed.
•
The knob of the flexible mount is attached to the base part
when purchased. Remove the knob before assembling the
flexible mount.
7
Assembling the Flexible Mount
1Remove the knob from the
base part.
Turn the knob in the
direction indicated.
2Insert the pod part into
the knob.
3Attach the pod part to the
base part.
Be careful not to pinch your
finger.
4Fasten the knob firmly.
1
2
3
4
When you fix the camera to a helmet, etc., attach the flexible
mount to the tripod mounting hole of the camera.
8
Component Names and Functions
< / – button
+ / > button
Record/SET button
Recording mode: starts/stops recording
Playback mode: starts or pauses playback
Power button
LCD monitor
MENU/DELETE button
Recording mode: displays the
menu
Playback mode: deletes a file
Strap hook
Use a strap or something similar
to prevent the camera being
dropped.
When attaching an
optional product not
manufactured by JVC,
make sure that the product
conforms to 1/4 ISO 1222.
Attaching a product with
a long screw may cause a
malfunction.
Play/Record
button
switches to the
recording mode/
playback mode.
Speaker
Microphone
Access LED
Lens
Battery slot
(inside)
HDMI mini connector (inside)
Port/slot cover
latch
SD slot (inside)
Mini USB Port (inside)
Tripod socket
9
Charging the Battery
1Load the battery.
~Slide the port/slot
cover latch in the
direction indicated.
ŸSlide and open the
cover in the direction
indicated while holding
down the latch.
!Insert the battery in the
correct direction (+/–)
while pulling the blue
lever to the left.
2Charge the battery.
~Connect the USB cable.
ŸPress < or > to select
"Adapter", and press
SET.
•The Access LED lights
during charging.
•The approximate charging
times are 5 hours (when
connected to a PC) and 2.3
hours (when connected to
the AC adapter).
• Be sure to use an AC
adapter manufactured
by JVC (AC-V17LU, sold
separately).
• Do not use batteries or AC
adapters made by other
manufacturers.
The Access LED turns off when
charging is complete. Remove
the USB cable and close the
cover firmly.
1
2
Ÿ
~
Access LED
10
Inserting an SD Card
Setting the Clock
• Insert a separately purchased
SD card into the SD slot firmly,
until the card is locked.
• To remove the SD card, push
the card in once, and pull it
out straight.
• When using a new SD card,
format the card in the menu
screen.
Operation is confirmed with the following manufacturers' SD cards.
Class 4 or higher SD/SDHC/SDXC cards
(up to 128GB)
When recording with 1080p60 (1080p50), Class 6 or higher is
required.
- SanDisk - TOSHIBA
1Press and hold Power for 2 seconds to turn the power on.
2Press MENU.
3Press < or > to select "Setup", and press SET.
4Press < or > to select "More", and press SET.
5Press < or > to select "Time Setting", and press SET.
6Press < or > to adjust the year, and press SET.
7Repeat the previous step to adjust the month, day, hour,
and minute.
• The screen in step 6appears the first time the camera is used.
Otros manuales para ADIXXION GC-XA2
3
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de acción de JVC
JVC
JVC GC-XA1U Manual de operación y mantenimiento
JVC
JVC GC-XA1BE Manual de usuario
JVC
JVC GC-XA2 BE Manual de operación y mantenimiento
JVC
JVC ADIXXION GC-XA2 Manual de usuario
JVC
JVC GC-XA1 BE Manual de operación y mantenimiento
JVC
JVC GC-XA1 Manual de operación y mantenimiento
JVC
JVC GC-XA1 Manual de operación y mantenimiento
JVC
JVC GC-XA1 BE Manual de operación y mantenimiento
JVC
JVC GC-XA1 Manual de operación y mantenimiento
JVC
JVC ADIXXION GC-XA2 Manual de operación y mantenimiento
