Juniper JSA7800 Guía de configuración

How to Set Up Your JSA7800 Appliance

Overview

Juniper Secure Analytics 7800 (JSA7800) is an enterprise and carrier-class appliance that provides a scalable network security

management solution for medium-sized companies up to large global organizations.

The JSA7800 appliance is a 2-rack-unit (2-U), rack-mountable chassis with AC power supplies (or optional DC power supplies),

sixteen hot-swappable hard drives, 128-GB memory, and two 10-Gigabit Ethernet SFP+ interfaces and four 1-Gigabit Ethernet

interfaces.

Package Contents

Following are the items available in the package:

•JSA7800 appliance

•End-User License Agreement

•Warranty and Registration Information

•Quick-Start Guide

•Power cords

•Rail adapters

•DB9 adapter

•Rail kit

•Rail kit screws

Front Panel

g100043

Power button

Reset button

LEDs

Hard drives 0-15 Empty slots 16-23

LockFront bezel

Back Panel

g100044

Power

supplies

VGA

port

USB

ports

Dedicated

IPMI LAN port

COM

port

enp4s0f0eno3

eno1

eno4

eno2 enp4s0f1

10GbE SFP+

ports

Physical Specifications

3.5 in. x 17.2 in. x 24.8 in.Dimensions (H x W x D)

54.4 lbChassis weight

465 WAverage power

1699 BTU/hourMaximum thermal output

Full operation 1M to Front: 68.4 dBNoise level

Full operation 1M to Rear: 70.8 dB

Initial Configuration Process

g100045

Verifying the

Settings

Connecting the

Management

Device

Configuring a

JSA7800

Appliance

Powering On

the Device

How to Set Up Your JSA7800 Appliance

Step 1: Powering On the Appliance

CAUTION: Before connecting the appliance to the power supply, attach an ESD strap to an ESD point and place the

other end of the strap around your bare wrist.

1. Plug the power cord into the AC receptacle on the rear panel. If your appliance contains two power supplies, plug a power

cord into each AC receptacle.

NOTE: Grounding for the appliances is provided through the power supply ground terminal. Ensure that you

connect the AC power supply module in the appliance to a grounded AC power outlet by using an AC power cord

(with the grounding pin) appropriate for your geographical location.

2. Plug the other end of the power cord into a wall socket.

3. Press the Power button on the front panel.

g000611

Power button

Reset button

LEDs

Power HDD

GLAN1

Information

GLAN2

Alert/Power fail

4. Note the following indications:

StateLED

Solid green— Indicates that the appliance is receiving power.Power

UnusedHard drive

•LAN1— Indicates eno1 interface activity when blinking.

•LAN2— Indicates eno2 interface activity when blinking.

LAN

•Red (blinking)— Indicates a fan failure.

•Solid red— Indicates an overheat condition, which might be caused by cables obstructing the

airflow in the system or the ambient room temperature being too warm.

•Red (slowly blinking)— Indicates a power failure.

•Solid blue —Indicates UID function is activated.

Information

How to Set Up Your JSA7800 Appliance

StateLED

•Solid red— Indicates a power supply failure.

•Amber— Indicates that the appliance is operating normally.

Alert/Power Fail

Step 2: Connecting the Management Device

You can connect external devices using the ports on the back panel of the appliance.

1. If you use a laptop, connect the laptop to the DB-9 serial COM port on the back panel.

NOTE: When using a laptop to connect to the appliance, you must use a terminal program, such as HyperTerminal,

to connect to the appliance.

NOTE: If your laptop or PC does not have a DB-9 male connector pin and you want to connect your laptop or PC

directly to the JSA7800 appliance, use a combination of a USB to DB-9 male adapter and a DB-9 F/F cable.

2. Select the appropriate COM port to use.

3. Configure the following COM port settings:

•Bits per second = 9600

•Stop bits =1

•Data bits = 8

•Parity = None

Step 3: Configuring a JSA7800 Appliance

1. At the console prompt, log in as root (default username). No password is required when you log in for the first time.

NOTE: The username is case sensitive.

2. Press Enter. The End User License Agreement (EULA) appears.

How to Set Up Your JSA7800 Appliance

3. Read the information and press the Spacebar to advance each window until you have reached the end of the agreement.

4. Type YES to accept the agreement, then press Enter. The Appliance ID selection window appears.

NOTE: Use the up/down arrow keys to highlight another option and press the spacebar to make the selection.

Use the left/right arrow keys to select Next, Back or Cancel, then press Enter.

Selecting an Appliance ID and Tuning Your Appliance

1. Select the appliance ID and then press Enter to select Next.

2. Select one of the following setup types:

•normal—Default setup

•recovery—HA recovery setup

How to Set Up Your JSA7800 Appliance

Configuring Date and Time for Your Appliance

1. Select the method you want to use to set the date and time.

•Manual— Allows you to manually input the date and time. Select Next.

•Server— Allows you to specify your time server. Select Next.

2. Select your time zone continent or area, and then select Next.

How to Set Up Your JSA7800 Appliance

3. Select your time zone region, and then select Next.

How to Set Up Your JSA7800 Appliance

Selecting the Internet Protocol and Configuring Your Appliance

1. Select one of the Internet protocols, IPv6 or IPv4.

2. Select Next. The Management Interface window appears.

3. Select the management interface, and then select Next.

4. Enter the values for the following parameters:

•Hostname— Type a fully qualified domain name as the system hostname

•IP Address, Network Mask, Gateway, and Primary DNS

•Optional— Secondary DNS and Public IP.

•Email server— E-mail server name. If you do not have an e-mail server, specify the local host in this field.

How to Set Up Your JSA7800 Appliance

5. Enter the new admin password. Re-enter your new admin password to confirm.

NOTE: The Admin Password Setup screen appears only in case of TA/LA All-In-One or Console installation.

6. Select Next. The New Root Password window appears.

7. Enter your new root password. Re-enter your new root password to confirm, and select Finish.

How to Set Up Your JSA7800 Appliance

A series of messages appears as JSA continues with the installation. Based on the appliance ID selected, the installation

process may take from several minutes to few hours to complete. TA "All-In-One" or Console installation may take up to 2.5

hours. When the JSA installation process is complete, the message window appears.

Step 4: Verifying the Settings

Verify the appliance configuration settings:

1. Open your Web browser.

2. Log in to JSA with the username admin and the password <admin password>.

<admin password> is the new admin password that you set during the configuration process.

3. Click Login.

With this step, you have successfully completed the configuration, and your JSA7800 appliance is ready for use.

Powering Off the Appliance

You can power off the appliance in one of the following ways:

•Graceful shutdown— Press and immediately release the Power button.

•Forced shutdown— Press the Power button, and hold it for five seconds. Use this method only if the appliance is not responding

to the graceful shutdown method.

References

•JSA Product Documentation

http://www.juniper.net/techpubs/en_US/release-independent/jsa/information-products/pathway-pages/jsa-series/product/

•JSA7800 Hardware Documentation

http://www.juniper.net/techpubs/en_US/release-independent/jsa/information-products/pathway-pages/hardware/jsa7800-hw-guide.html

•Technical Support

How to Set Up Your JSA7800 Appliance

Otros manuales para JSA7800

Tabla de contenidos

Otros manuales de Cortafuegos de Juniper

Juniper

Juniper NETSCREEN-5XT Manual de usuario

Juniper

Juniper NetScreen-50 Manual de usuario

Juniper

Juniper SRX5600 Manual de usuario

Juniper

Juniper NETSCREEN-200 SERIES Instrucciones de montaje

Juniper

Juniper Advanced Threat Prevention Appliance Manual de instalación

Juniper

Juniper NetScreen-50 Instrucciones de montaje

Juniper

Juniper JATP700 Guía de configuración

Juniper

Juniper JSA3500 Manual de usuario

Juniper

Juniper NetScreen-5GT Wireless Manual de usuario

Juniper

Juniper NetScreen-25 Manual de usuario

Juniper

Juniper JATP400 Guía de configuración

Juniper

Juniper NS-5400-P00A-S00 Manual de usuario

Juniper

Juniper JSA7800 Instrucciones de instalación

Juniper

Juniper NetScreen-5000 Series Manual del operador

Juniper

Juniper NetScreen-5GT Wireless Manual de usuario

Juniper

Juniper NetScreen-204 Manual de usuario

Manuales populares de Cortafuegos de otras marcas

Cisco

Cisco S190 Manual de usuario

Fortinet

Fortinet FortiGate Voice Series Manual de usuario

ADTRAN

ADTRAN NetVanta 2300 Manual de usuario

SecureLogix

SecureLogix ETM System Manual de usuario

NETGEAR

NETGEAR ProSafe FVX538 Manual de usuario

Lanner

Lanner FW-8877 Manual de usuario

Huawei

Huawei USG6000 Series Manual de instalación y operación

H3C

H3C SecPath F5000-AI-15 Manual de usuario

Nexcom

Nexcom DNA 1150 Manual de usuario

Fortinet

Fortinet FortiGate-60 series Manual de usuario

Cisco

Cisco 3110 Manual

Draytek

Draytek Vigor2860 Series Manual de usuario

Lanner electronics

Lanner electronics FW-7650 Series Manual de usuario

Swisscom

Swisscom Internet Backup Manual de usuario

SonicWALL

SonicWALL NSa 5700 Manual de usuario

DPtech

DPtech FW1000 SERIES Manual de usuario

FEITIAN

FEITIAN MultiPass FIDO Manual de usuario

EBLOCKER

EBLOCKER PRO Manual de usuario