Jung SV-SERVER-01 Manual de usuario
Smart Visu Server
SV-SERVER-01
Operating instructions
USA
Table of Contents
Safety instructions 4
Correct use 4
Product characteristics 4
Scope of delivery, legal information 4
Technical data 5
Structure of the device, function 6
System information 7
Mounting, start-up 8
Warranty 9
E
Índice
Instrucciones de seguridad 10
Uso previsto 10
Características del producto 10
Volumen de suministro, nota legal 10
Datos técnicos 11
Estructura del aparato, función 12
Información del sistema 13
Montaje, puesta en funcionamiento 14
Garantía 15
2
3
USA
4
Safety instructions
CAUTION
Read all instructions rst before mounting the product.
Do not drink any alcohol or take any drugs before or during the mounting of the
product. Follow the safety instructions carefully.
This device is intended for installation in accordance with the National Electric
Code® and local regulations in the United States. If you are unsure or uncomfortable
about performing this installation consult a qualied electrician.
These instructions are an integral part of the product, and must remain with the end
customer.
Correct use
• Visualisation and operation of KNX systems via terminals with HTML5-compatible brows-
ers, e.g. smartphone, tablet, laptop, PC etc.
• Visualisation and operation of Philips Hue systems
• Operation in local IP networks, which support DHCP (Dynamic Host Conguration Proto-
col), or with xed IP address (IPv4)
• Interior operation
Product characteristics
• Web visualisation of the KNX system as for status display and operation (SV-Home)
• Integrated, web-based start-up tool (SV-Control)
• Simple creation of a precongured operating desktop, optimised for applications at home
and in small commercial buildings
• Graphical operating elements, selection of icons from supplied libraries
• Import of group addresses (three-level) via OPC import (ETS3, ETS4, ETS5)
• Manual input of group addresses possible
• 24 areas
• 240 dynamic functions (max. 1200 datapoints)
• 250 congurable actions (max. 16 functions per action)
User-dened
Time switching points
Status logics
Event-dependent
• Connection to the KNX-BUS via KNX IP router or KNX IP interface
• Integration of Philips Hue systems in the KNX system
• Connection to Philips Hue via the Philips Hue Bridge
• Updateable and upgradeableScope of delivery
• Smart Visu Server including software
• Retaining bracket for wall or support rail mounting
• Operating instructions
• Power supply unit with plug
• Power supply unit, including adapter for BS (United Kingdom),
EU (Euro plug) and CN (China)
USA
5
Legal information
Philips and Hue are registered trademarks of Koninklijke Philips Electronics NV.
This product contains Open Source software components, which are subject to the conditions
of Copyright and/or the license agreements of third parties.
The license information is located on the Smart Visu server.
Technical data
Rated voltage: DC 12 V SELV
Power consumption: Typ. 3 W, max. 7 W
Ambient temperature: –5 ... +45 °C
Storage/transport temperature: –25 ... +70 °C
LAN: RJ45 socket
(10/100 Mbit/s Fast Ethernet) CAT5
USB: USB 2.0 Host
Dimensions: 124 x 72 x 31 mm
(without retaining unit)
124 x 92 x 40
mm (with retaining unit)
Power supply unit with plug
Primary voltage: AC 100 ... 240 V ~
Mains frequency: 50 / 60 Hz
Rate current: max. 1 A
Secondary voltage: DC 12 V SELV
Protection class: II
Length of connecting cable: 1.5 m
CAUTION
This device contains a battery (CR1632, 0.4 Wh) to back up the saved data. Do
not dispose of discharged batteries with domestic waste. During transport, comply
with the special regulations of the ADR and IATA.
6
USA
Structure of the device
1
65
4
2
3
(1) USB interface For software updates
(2) Ethernet interface For connection to the local network
(3) Power supply Only use the power supply unit from the scope of
delivery.
(4) Status LED Displays the current status of the server
(5) Reset button Reset and update
(6) Discharge protection Remove for operation
Function
The Status LED (4) displays the various operating statuses.
Colour of the Status LED Function
Flashing yellow Server booting
Flashing red Error pending, server stopping
Continuous yellow Server and network booting
Continuous blue Server ready, DHCP active
Continuous green Server ready, static network address
Continuous red Update completed, restart is initiated
Flashing blue/magenta Update operation, DHCP active
Flashing green/magenta Update operation, static network address
7
USA
The Reset button (5) triggers a reset or an update.
Reset network settings, DHCP
operation active
Press the button ≥ 5 seconds, LED ashes yellow,
press the button again briey
Factory reset Press the button for 20 seconds, LED ashes red,
press the button again briey
Initialise update operation Press the button briey 5x
- LED turns magenta: No update available
- LED ashes magenta: Update operation
System information
The Smart Visu Server is used to visualise and operate a KNX system connected to the same
network via a smartphone, tablet, laptop or PC and to control Philips Hue systems (SV-Home). A
local network is required for it to function.
The connection to the KNX is made via the KNX IP interface. The connection to the Philips Hue
system is made via the Philips Hue Bridge.
Start-up takes place via the web-based interface (SV-Control).
The technical documentation is also available here.
The server organises KNX functions and Philips Hue operation into areas, functions and actions.
Area: An area indicates an assignment, e.g. to a room.
Up to 24 areas are possible.
Function: A function corresponds to, for example, a KNX function, thus possibly
comprising multiple group addresses, e.g. switching channel with
feedback. A function could also be the link to a Philips Hue lamp.
Up to 240 functions can be created with up to 1200 datapoints. Each functi-
on can be assigned to one or more areas.
Action: An action is a grouping of one or more functions. Actions can be triggered
by events, by time or via user-dened controls. In addition, status logics are
represented.
KNX projects can be imported from the OPC export (3-level group address) of ETS3, ET4 or
ETS5 or be created manually.
USA
8
Mounting
Mounting takes place using the supplied retaining unit on the wall or on a support rail according
to DIN EN 60715. The server is snapped onto the retaining unit.
CAUTION
This device has to be supplied by either:
external delivered power supply
or
external certi ed power supply Class 2
Rated 12 V DC, 500 mA (min.)
Start-up
A current HTML5-compatible browser (input device) is required for access to SV-Home and
SV-Control.
Smart Visu Server, interface, network router (DHCP active) and input device
must all be part of the same network. During start-up, the Smart Visu Server expects the assig-
nment of an IP address via DHCP.
Remove the discharge protection (6) from the server. Connect the server to the network (2) and
the power supply unit to the server (3).
After the mains plug has been connected, the server will boot.
As soon as the Status LED (4) turns blue, the server is ready for operation.
In the address line of the Internet browser, enter:
http://sv-server.local
This opens the homepage of the server.
If the homepage is not opened, then determine the IP address of the server in the router ma-
nually. Enter the determined address, e.g. 192.168.178.26, in the address line of your Internet
browser, e.g.:
This opens the homepage of the server.
Further start-up takes place via SV-Control. For this, the IP address of the KNX-IP interface
must be determined from the device con gured or the network router. The progress of start-up
can be seen live in SV-Home.
For more details about further start-up steps and data import,
please refer to the technical documentation, which can be found
on the server (SV-Control) or on the Internet at www.jungcontrols.com
Accessories
KNX IP interface Art. no.: IPS 200 REG
KNX IP router Art. no.: IPR 200 REG
Warranty
If you have any questions about this product, contact:
Jung USA, Inc.
350 Fifth Avenue, Suite 5220
New York, NY 10118
Phone: +1 800.311.6135
Email: [email protected]
www.jungcontrols.com
For the product warranty, please refer to the attached document.
All rights reserved
USA
9
10
E
Instrucciones de seguridad
ATENCIÓN
Lea todas las instrucciones antes del montaje de este producto.
No consuma alcohol o drogas antes o durante el montaje del producto. Observe
detenidamente las instrucciones de seguridad.
Este dispositivo está previsto para la instalación conforme al National Electric
Code® y la normativa local de Estados Unidos. Si no se siente cómodo o no está
seguro de cómo realizar esta instalación consulte a un electricista cualicado.
Estas instrucciones son parte integral del producto y deben permanecer con el
cliente nal.
Uso previsto
• La visualización y manejo de sistemas KNX a través de terminales con navegador compa-
tible con HTML5, p.ej. Smartphone, Tablet, ordenador portátil, PC, etc.
• Visualización y manejo de sistemas Philips Hue
• Servicio en redes IP locales con soporte DHCP (Dynamic Host Conguration Protocol), o
con dirección ja (IPv4)
• Servicio en interiores
Características del producto
• Visualización web de la instalación KNX para indicación de estados y manejo
(SV-Home)
• Herramienta integrada de puesta en servicio con base web (SV-Control)
• Creación sencilla de entornos de usuario precongurados, optimizados para
aplicaciones de carácter doméstico y pequeños objetos comerciales
• Elementos de manejo grácos, selección de la simbología a partir de bibliotecas
suministradas
• Importación de direcciones de grupos (tres niveles) mediante importación OPC
(ETS3, ETS4, ETS5)
• Posibilidad de entrada manual de direcciones de grupos
• 24 áreas
• 240 funciones dinámicas (máx 1200 puntos de datos)
• 250 acciones congurables (máx. 16 funciones por acción)
• denido por el usuario - puntos de conexión
• lógicas de estado - en función de evento
• Integración en el KNX-BUS a través de enrutador IP KNX o interfaz KNX IP
• Integración de sistemas Philips Hue en la instalación KNX
• Integración en Philips Hue a través de Philips Hue Bridge
• Posibilidad de actualización y upgrade
Otros manuales para SV-SERVER-01
1
Tabla de contenidos
Idiomas:
Otros manuales de Servidor de Jung
Jung
Jung Visu Pro SENEC Edition Manual de usuario
Jung
Jung Smart Visu Server Manual de usuario
Jung
Jung Visu Pro Server Manual de usuario
Jung
Jung Smart Visu Server Series Manual del operador
Jung
Jung Smart Visu Server Series Manual del operador
Jung
Jung SV-SERVER Manual de usuario
Jung
Jung Smart Visu Server Manual de usuario
Jung
Jung Smart Visu Server Manual de usuario
Jung
Jung SV-SERVER-01 Manual del operador
