Jumbuck CB001 Manual de usuario
CB001
Assembly instructions
PART NUMBER PART NAME SUPPLIER CODE
1 Round bakelite handle CB00101
2 LID CB00102
3 Air vent with handle(for
Lidl) CB00103
4 Hanging hook CB00104
5 Square bakelite handle CB00105
6 Fire bowl CB00106
7 Air vent with handle(for
fire bowl) CB00107
8 Ash tray CB00108
9 Leg R CB00109
10 Leg L CB00110
11 Wire shelf CB00111
12 Leg-M CB00112
13 Wheel(150) CB00113
1.Leg L …. 1pc
2. Leg-R .........
1pcs
3. Wire shelf... 1pc
4. Leg-M..... 1pcs
5. Square bakelite
handle..2pcs
6 . Wheel(150) ...
2pcs
7. Air vent with handle(for
fire bowl).......1pcs
8. Fire bowl.....
1pcs
9.Charcoal grid.. 1pcs
10. Cooking
grid …... 1pcs
11. Round bakelite
handle…... 1pcs
12. Lid ... 1pcs
13. Air vent(for lid).......
1pcs
14. Hanging hook ...
1pc
15 Ash tray......1pcs
zFor outdoor use only.
zImproper installation, adjustment, alteration,
service or maintenance can cause property damage,
injury or death. Read the installation, operating
and maintenance instructions thoroughly before
installing or servicing this equipment.
zWarning: accessible parts may be very hot. Keep
young children away.
zDo not move the appliance during use.
zAny modification of the appliance may be
dangerous.
zInstaller to leave instructions with the consumer
and consumer to retain them for future reference.
A
4pcs
H
2 pcs
B
4 pcs
I
2 pcs
C
2 pcs
J
Bolt
M6 x 35 mm
4 pcs
D
2 pcs
K
2 pcs
E
12pcs
L
4 pcs
F
4 pcs
M
2 pcs
G
2 pcs
Bolt
M5 x 32 mm
Bolt
M6 x 15 mm
Flat Washer
Ø4.0 mm
Lock Washer
Ø5.0 mm
Flat Washer
Ø6.0 mm
Nut M6
Bolt
M5 x 10 mm
Wing Nut
Nut M5
Bolt
M4x 20 mm
Nut M4
Nut M8
Dispose of all polythene packing carefully and keep out of the reach of
children.
Please read the section on barbecue safety prior to using your Barbecue.
TOOLS REQUIRED
*Philips screwdriver
*Pliers or adjustable spanner
IMPORTANT NOTES
*Do not use this appliance indoors.
*Do not use this appliance inside a tent, gazebo or whithin a confined
space.
*This heater will become very hot during and for some time after
use.Keep children away from the heater and do not touch metal parts of
the heater when in use. Use suitable gloves for protection, especially
*when loading the heater with logs and coal.
We recommend protecting your heater when not in use with a cover to
protect from rusting and exposure to rain.
STEP 1
Insert Leg L (Part 1) and Leg R (Part 2) to the Leg M (Part 4) as shown, and then
assemble Bottom shelf (Part 3) to the legs.
STEP 2
Assemble wheel axis through Leg L & R and Wheel (Part 6), use bolt (x, 2) to tighten.
STEP 3
Assemble Body handle (Part 5) to the Pan (Part 8) as shown, use bolt B (x, 4) to
tighten.
STEP 4
Assemble Air valve (Part 7) to the Pan as shown, use bolt, nut to tighten.
STEP 5
Assemble Pan to the legs as shown, use Lock washer C (x, 4), Nut F(x, 4), Flat
washer E(x, 4), Bolt J(x, 4) to tighten.
STEP 6
Place Cooking grid (Part 9) into the Pan.
STEP 7
Then place Cooking grid (Part 10) into the Pan.
STEP 8
Assemble Cover air valve (Part 13) to the Top cover (Part 12)as shown, use bolt I (x,
1), Flat washer D(x, 1) and Wing nut K (x, 1) to tighten.
STEP 9
Assemble Cover handle (Part 14) as shown, use Bolt H(x, 2) and Nut M(x, 2) to
tighten.
Tabla de contenidos
Otros manuales de Parrilla de Jumbuck
Jumbuck
Jumbuck HS-Gens-310 Manual de usuario
Jumbuck
Jumbuck HS-UM011SB Manual de lista de piezas
Jumbuck
Jumbuck CIRCA HS-A160 Manual de lista de piezas
Jumbuck
Jumbuck GEN-SE-25T Manual de usuario
Jumbuck
Jumbuck BG1507B6 Manual de usuario
Jumbuck
Jumbuck HS-CB001 Manual de usuario
Jumbuck
Jumbuck HS-UM006AS Manual de lista de piezas
Jumbuck
Jumbuck Fineline JBPB219 Manual de lista de piezas
Jumbuck
Jumbuck HS-UM006D Manual de lista de piezas
Jumbuck
Jumbuck GEN-D325 Manual de usuario
