JRI YJ-390DA Manual de usuario
DOT MULTI PRINTER
INSTRUCTION MANUAL
Multi Printer
2
CONTENTS
1. Specifications
1-１Items supplied
1-２General specifications
1-３Compatibility
1-４External View
1-５Names of Each Part
1-６Installing the Printer Paper
2. Functions
2-１General Function Keys
2-２General Settings
2-３Printer Settings
2-４Detailed Printer Functions
3. Communication interface
3-１RS-232C Serial Pin
3-２RS-485 Serial Pin
3-３Current Loop Pin
3-４External Input Pin
Multi Printer
3
1. Specifications
1-１Items supplied
The following items are supplied:
Printer
Test paper
Adapter
Serial cable
Instruction Manual
1-２General Specifications
ITEM
Specifications
Printing method
8 Pin Serial Impact dot matrix system
Number of dot per line
240 DOT
Printing speed
1.6 LINE/SEC
Columns number
30 Columns (in English)
Font size
English: 8x14, Korean: 16x14
Support language
English/Korean (Options available in the internal
program setting mode)
LCD
8 x 2 LINE (BACK LIGHT Function)
Printer Mode
Statistical calculation mode, Clock mode
Cartridge
EPSON ERC-09
Printing paper
57mm(w) x 60mm(dia) ROLL PAPER
Printing width
48mm
Interface
- SERIAL RS-232C,Current Loop
- RS-485(OPTION)
BAUDRATE = 300/600/1200/2400/4800/9600/19200bps
PARITY = None/ Even/ Odd
DATA WIDTH = 8/7 bit
STOP BIT = 1/2 STOP
2 External Input Port
Power
DC +12V 1.5A (External ACAdapter)
Operating temperature range
-15℃~ 50℃
Storage temperature range
-20℃~ 70℃
Certificates
KC Certification, CE Certification
Dimensions (mm)
174.3(W) x 141.3(D) x 86.9(H)
Specifications are subject to change for improvement without notice.
1-３Compatibility
Multi Printer
4
Company
Model
AND
Balance, Scale
SARTORIUS
CP4201, BP410
CAS
AD Series, BW Series, CI Series, CUW/CUX Series, MW Series
OHAUS
Adventurer Series, Explorer Series
PRECISA
480S,/480SCS Series, 24D Series, XB-4200C
MATTLER
AB204-S, PG5002-S
SHIMADZU
EL Series, BX-K Series, UW, UX Series, BL Series
DESCOM
GT-150,PC-100W
SHINKO
AJ-D/AJH-D
SETRA
EL Series
UNIPULSE
F701-C, F741-M
SEWHA
SI 4010
RADWAG
PS210/C/1, PS6000/X, PC750/Y
ACOM
PC-100
* Some other products (not shown in the table) may comply with AD-720Di.
1-４External View
Multi Printer
5
1-５Names of Each Part
[ Front ]
[ Rare ]
Paper Cover
LCD Display
Screen
Power Switch
Function buttons
Paper Cover Fix Levers
Power Input Serial Interface External Input Port
Multi Printer
6
1-６Installing the Printer Paper
①Do not send data to the print during installing the printer paper.
②Push the both fix levers to slide the printer paper cover in the direction of the arrow.
④Insert the printer paper as shown below (the leading edge of the printer paper should
head downwards).
⑤Push the printer paper lightly into the paper slot, then press “FEED (8) button to mount the
paper automatically.
⑥Close the printer paper cover
Multi Printer
7
2. Functions
2-１General Function Keys
Key
Function
"1" (TIME)
Sets the time
"2" (DATE)
Sets the date
"3" (MODE)
Sets the modes
"4" (CODE)
Inputs or changes codes (this key does not function in NORMAL
MODE)
"5" (S-TOTAL)
Prints subtotals (subtotal number of prints, weights measured, etc.)
"6" (G-TOTAL)
Prints totals (Total number of prints, weight measured, max/min values,
range, standard deviation, etc.)
"7" (DELETE)
Deletes the last data printed
"8" (FEED)
Slides up the printer paper
"9" (TEST)
Prints the current printer setting (when power is ON)
"0" (PRINT)
Print key (only in MANUAL MODE)
"ESC"
(MENU/Cancel)
-Enters the printer setting menu (when power is ON)
-Operates only in Printer Setting mode.
-Clears certain setting(s).
"ENT" (Setting)
-Operates only in Printer Setting mode.
-Saves the current setting(s).
TIME/DATE/CODE/FEED/S-TOTAL/G-TOTALkeyscanbeused whileundergoinginterfaceerrors.
By pressing “5” or “6” without measurements, the printer automatically prints out
“SUBTOTAL /TOTAL NO DATA” .
When the number of measurements reaches 999 and “0” key is pressed, the printer
automatically prints subtotals and totals, and resets the count to 000.
2-２General Settings
Multi Printer
8
2-2-1. Time Setting
-Switch the power on and press “1” to enter the time setting mode.
-The time is to be set in a 24-hour format, and use “0”~”9” keys to do so.
(Example)
Setting the time
e.g. Set the time to 1:30PM
1) Press “1” to enter the time setting mode (the cursor blinks) time setting mode.
2) Press “1”, “3” (hour), “3”, “0” (minute) “0”, “0” (second) in order.
3) Press “ENT”to save the set-up time or “ESC” to cancel.
2-2-2. Date Setting
-Switch the power on and press “2” to enter the date setting mode.
-The first two digits represent the year (i.e. 00 as in 2000, 99 as 2099, etc.) and use “0” ~
“9” kyes to set the year, month and day as shown below.
(Example)
Setting the date
e.g. Set the date to June 15th 2014
1) Press “2” to enter the date setting mode (the cursor blinks).
2) Press “1”, “4” (year) “0”, “6” (month) “1”, “5” (day) in order.
3) Press “ENT”to save the set-up date or press ESC to cancel
TIME SET
10:48:57
Hour Minute Second
DATE SET
14-06-15
Year Month Day
SAVE? E
13:30:00
SAVE? E
14-06-15
Multi Printer
9
2-2-3. Mode Setting
-In the turning on print, press “3”key for 1~2 seconds to move “PRINT MODE”setting.
-In the print mode setting, use “▲”and “▼”buttons to change print mode.
(Display)
-Press “ENT”or “ESC”to save or cancel the setting screen.
"ENT" = Setting save, "ESC" = Setting cancel
2-2-4. Code Setting
-Make sure the power is on, then press “4” and hold for 1 to 2 seconds to enter “CODE
SETTING”.
-Use a combination of alphabets and numbers up to 8 digits to create a code.
(Example)
Setting the code
e.g. Set the code to 123456A5
1) Press “4” and hold for 1 to 2 seconds to enter the code setting mode (the
cursor blinks).
2) Numbers and alphabets are only inserted backwards. Press “5”, then press
“ENT” to set the last digit (i.e. 5). The cursor automatically moves to the next
code to insert.
3) Alphabets are inserted by pressing the number kyes twice. Press” 2” twice to
put “A” as shown in the example.
4) Press the :ENT”key after conversion “A”to the store ”A”has been moving cursors
Automatically.
5) In the same way, insert the remaining 6 digits from backwards (i.e. 6, 5, 4,
3…etc.) to complete the code. When the code is completely inserted, the
printer automatically saves the code setting and operates on Stand-By mode.I
6) During setting the code, press “ESC” to cancel and exit without changing the
previous code setting.
CODE SET
00000001
PRN MODE
EXT.KEY*
Multi Printer
10
2-2-5. Various Keys to Print
[Press PRINT or “0” to print measured data.] [ Press G-TOTAL to print totals ]
[ 소계 키시소계 데이터 인쇄 ]
[ Press “S-TOTAL” to print subtotals ]
Code : 00000001
2014-04-08 17:23:30
NO 001 40.40 g
2005-02-16 17:23:40
NO 002 90.78 g
==========================
*****< subtotal >*****
2014-04-08 17:24:50
Code 00000001
NO 002
TOTAL 131.78 g
==========================
= = = = = = = = = = = = = = = = =
*****< TOTAL >*****
2011-04-08 17:25:50
CODE 00000001
NO 002
TOTAL 131.78 g
Average 65.39 g
MAX 90.78 g
MIN 40.40 g
RANGE 50.78 g
DEV. 25,389 g
C.V 0.388 %
= = = = = = = = = = = = = = = = =
Tabla de contenidos
